Question about Mitsubishi WD-62525 62" Rear Projection HDTV

1 Answer

Lamp Light Red - No Screen Image

When we turned on the TV, the lamp light turned on a constant red. The lamp light never even flashed green with a warning. The screen was black and there was no image or sound. We tried to reset the TV but it still didn't turn on. We ordered a new lamp and installed it but there is still no image/sound and the lamp light is still a constant red. We replaced the original lamp about 4 months ago when the lamp light was flashing green but this time there was no lamp warning. The original lamp lasted over two years. Is this a lamp issue or something else? Any suggestions appreciated...

Posted by on

  • 7 more comments 
  • lefty123 Dec 24, 2007

    watching tv went out lamp exceeded life please replace bulb

    what do i do...

  • cwebber1 Jan 18, 2008

    I've got the exact same scenerio for mine, same model too, what ended up being the cause?? I called a tech he said it was the ballast and they weren't too difficult to install so I was about to order 1 until I read your post. Thanks

  • Anonymous Feb 11, 2008

    I have the mitsubishi-WD-62527 model . When I turn on the TV I can hear the sound and see the green light but in 10 second the light changes to red, with no sounds and no picture just a blue screen. I have replaced the lamp twice but still the same situation. Please let me know how can I enjoy the picture and sound of my TV again? Please respond to sgtperez25@hotmail.com Thanks.

  • Anonymous Mar 13, 2014

    red lamp light flashing new bulb last week

  • Anonymous Mar 18, 2014

    how do i fix it

  • Anonymous Mar 18, 2014

    whats wrong with it

  • Anonymous Mar 20, 2014

    Mitsubishi 73 inch TV only used for a year and a half The little green power light comes on but the screen is black Is this a lamp problem or something else?

  • Anonymous Mar 22, 2014

    I replaced the lamp and now it will not turn on and the Lamp led is flashing

  • Anonymous Mar 22, 2014

    PICTURE IS DARK ALMOST BLACK, PUT ANOTHER LAMP IN DIDN'T FIX THE PROBLEM. NO FLASHING LIGHTS JUST CONSTANT GREEN LIGHT

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 3,130 Answers

It could be the a problem with the lamp ballist circuit, or just a bad lamp socket, or simply a bad lamp. The only way to tell is to call out a servicer as that would be alot less expensive then to get a new lamp and then that not be the problem. These problems can be a little hair pulling at times, thats why i have no hair left!! LOL Good Luck

Posted on Mar 21, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Trying to replace lamp in HDTV and having trouble. Does not function correctly after putting in new bulb. Boots up and then visuals go black and the green power light keeps flashing. Help?


Panasonic DLP TV Bulbs

Make sure its an original Osram or Philips bulb inside the housing. If its a cheap lamp it will act this way. If it is an original lamp, then you may have a power supply issue. It shouldn't affect your TV but you may want to try resetting the lamp timer by following the instructions that came with the lamp.

TY-LA1001 Timer reset

While pressing the VOL- button on the projection display, hold down the number 0 button on the remote control at the same time for more than 5 seconds.

Aug 15, 2015 | Panasonic Pt-52lcx16 Projection Television

1 Answer

Sony Wega 60" TV lamp light


Nope. It appears that you now have a main power supply issue since the set is dead.

Jun 23, 2017 | Sony Grand WEGA KDF-60XS955 60" Rear...

2 Answers

Tv turned off by itself, red light came on. when i turned it back on if had a flashing green light the turned solid green, there was sound but no picture, it turned off again within 2 minutes of turning it...


Tv probally needed a new tv projection lamp.This tv has not been change it projection lamp like 1 1/2 or 2 years already?Tv been on and used it like 4 or 5 hours everyday?Yes,than the tv flashing or solid on green LED light is on have a word "LAMP" written on it tv bazel frame?Yes,tv 100% require a new tv projection lamp replacement.

Aug 31, 2011 | Mitsubishi WD-73737 73 in. HD-Ready TV

1 Answer

The tv Sony kdf-42we655 will not turn on, the light will flash green and make a humming sound but thats it, the light below that labeled "lamp" flashes red? Why is the tv not working properly and why is...


Your tv is a projection one - it uses a very powerful lamp/bulb to generate the light that used for the image. In your tv that bulb has died and must be replaced - it will cost about $200.

Jul 05, 2010 | Sony KDF-42WE655 Television

1 Answer

My KDF-42WE655 will not turn on . The green start up light comes on and I can barely see the tv come on . After a few seconds the red light starts blinking and does not stop. The screen never comes on ....


Hello! When was the last time you replace lamp in your TV? If long time ago (2+ years) - replace the lamp. If red light blinks in sequence (example 4 flashes, pause, 4 flushes, pause and so on) - then I need to know how many flushes between pauses. It is an error code. If it blinks just constantly - it is a bad lamp. Regards. Russ.

Apr 18, 2010 | Sony Grand WEGA KDF-42WE655 42" Rear...

2 Answers

I try to turn it on but it just blinks on stand by


Probable Lamp. If lamp hasn't bown the red Lamp Lite won't flash but other lamp issues cause stby timer light to continue flashing. If stby red lite is flashing, count the no. of times flashing - could open thermal fuse (6X flashing)

Nov 27, 2009 | Sony KDF-E42A10 42 in. LCD Television

2 Answers

The tv will turn on but no the screen wont. and


Replace the lamp would be the first thing to try. Lamp door switch on this model is notorious for going bad. If you replace lamp and still won't turn on jumper door switch. If you take off back you can see switch board.

Nov 21, 2009 | Sony KDF-E50A10 50 in. LCD HDTV

2 Answers

Red power light and buzzing sound with red lamp light.


My Sony lost its picture and had a flashing light. Unplugging for 36 hours solved the problem.

Mar 29, 2009 | Sony KDF-E60A20 60 in. LCD HDTV

2 Answers

My Sony HD-TV KDF-50E2000 is about 18 months old. The picture went out. The green on light stays on for only a few minutes then goes off and the red lamp light flashes. You can turn the Tv on again and the...


How many times Red Lamp flashes, its important as it shows problem and its location in tv. Below is detail of lamp blinks and you may know the problem area in tv by counting lamp flashes.

4b8d433.jpg
Need further help, let me know.

Sep 13, 2008 | Televison & Video

Not finding what you are looking for?
Mitsubishi WD-62525 62" Rear Projection HDTV Logo

806 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1216 Answers

The Knight
The Knight

Level 3 Expert

75311 Answers

Jaime Hernandez

Level 3 Expert

2336 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...