Question about Microsoft Windows XP Professional With Servise Pack 2 (e8503040) for PC

1 Answer

I have an exchange server that is connected to an ISA server. It stopped sending messages externally but can send and receive mails locally. I noticed that the ISA server in the IIS manager has Receiver SMTP virtual server stopped, if I try to start it, it doesn't. What should I do? Thank you

Posted by on

  • 2 more comments 
  • macdaodus Dec 17, 2008

    This solution did not work. What do I do next?

  • macdaodus Dec 20, 2008

    The solution did not work. Mails can still be sent locally but can't be sent to internet. Hope to get more suggestion.

    Thank you



  • Cosma Papouis
    Cosma Papouis May 11, 2010

    Are you in the UK?

  • Cosma Papouis
    Cosma Papouis May 11, 2010

    If you are in the UK call me on 07956323938 and I can do a site visit.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 829 Answers

Now when somebody reports that he or she is not getting any "outside"
emails, I go to Exchange System Manager -> Servers -> <server> ->Protocols ->
SMTP -> Default SMTP Virtual Server - > Current Sessions and I see a bunch of
.br, .it, .ar, OHIOIJHOJOJI, etc, user names with connected times 98353566,
43543543, 3453453 seconds, or in another words with endless connection times.

I understand, that once the exchange reaches the number of connections of
50, it stops accepting new connections, stops receiving emails and here is my
qustions:
1. Why the "Terminate All" command doesn't remedy the problem with email flow?
As the second option, I try to restart SMTP service, but it freezes in a
stopping mode leaving me with only one option to restart entire server. (BTW,
I've also noticed that it feezes after I update IMF filter and I need to
restart the server)
2. what are those connections and how to protect Exchange from them?

Posted on Dec 16, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Unable to send e-mail through OE 6 installed. Getting error message as below: An unknown error has occurred. Account: 'HOME', Server: 'smtp.bsnl.in', Protocol: SMTP, Server Response: '421 Cannot...


You probaly have the SSL box checked in your SMTP settings.

Open Outlook Express.
Click on Tools in the menu, and click on Accounts in the drop-down menu.
Click on Mail.
Double-click mail account.
Click on Advanced.
Outgoing mail (SMTP) should be 25
Box on the left of This server requires secure connection (SSL) should be clear. If not, click on it to clear the check.
Clikc OK button and you should now be able to send emails.

Dec 17, 2010 | Computers & Internet

2 Answers

Some email messages people are sending to my correct address are not reaching me. Where are they going?


People send messages from their computer to their ISP's mail-server -- compare to dropping an addressed letter into a US Postal Service mailbox.
Then, the ISP's mail-server tries to send the message to your ISP's mail-server -- compare to the US Postal Service transporting a bag of messages from the "source" city to the "target" city.
Hopefully, your ISP's mail-server is "accepting" messages from the other ISP. This can take a while -- imagine the volume of E-mail from HOTMAIL customers to YAHOO customers!

Then, your computer tries to "pull" the message from your ISP's mail-server onto your computer. Hopefully, this works.

Finally, your E-mail program may be doing "spam-filtering", and may put the incoming message into the 'Junk Mail' folder.
Have you looked in that folder?

So, there's lots of "opportunity" for messages to be "stuck" someplace. Without explicit details, and log-files from the sender's mail-server and your ISP's mail-server, it's impossible to be more precise.

Sep 07, 2010 | Computers & Internet

1 Answer

This message pops up when I try to receive email on microsoft outlook. Task 'pop3.telkomsa.net - Sending and Receiving' reported error (0x80042108) : 'Outlook is unable to connect to your incoming...


Probably your settings or configurations for Outlook is not properly set.

Refer to these sites for conguration settings using M/S outlook.
1. Configure outlook anywhere(MS Office 2010) @ http://technet.microsoft.com/en-us/library/cc179036.aspx

2. Configure outlook anywhere(MS Office 2007) pdf @ http://occs.odu.edu/projects/exchange/outlook_anywhere.pdf


Hope it helps.


Aug 23, 2010 | Microsoft Computers & Internet

1 Answer

I cannot send email to using yahoo account


You must allow your router access to send out mail. other wise it will keep the messages you send in the outbox. go to your router setup or type your router ip address in the internet browser and manually enable the port 465 you may have to goto applications and games tab if you have a linksys router. Also enable ports 80 for internet,25 for simplemail transport protocol (SMTP),110(e-mail),443secure (bank account information) this will allow the router the proper ablity to send and recieve e-mails.

Sep 26, 2009 | Computers & Internet

1 Answer

When trying to send a window by email from a web sitei get a message that microsoft exchange server is not on line , is there a cure


window? you mean a screen shot? Are you doing it from home or work? If home, them mail client will open if you trying to send "window" direectly from the browser. I will recommend, save window as a .jpg or in any other format on your desktop. Then go to your e-mail like hotmail, gmail or whatever you use and then attach that windows.jpg into that e-mail.

Jamil

Sep 25, 2009 | Microsoft Windows XP Professional

1 Answer

I can't get exchange to smtp out. godaddy was the email host but they weren't very helpful and change MX to point to my server. Now it's worse... can't get incoming or outgoing.


1. The mx record has to be changed to an adress, which can be reached from the internet. It has to be an public IP Adress or you have to use dyndns.org or something like that. If the Server is not reachable directly in the Internet, you have to set your Internetrouter to forward smtp to your server in your network.

2. There are cases, when you need to configure a Smart Host for your e-mail server. A typical example is the situation, when your ISP blocks outbound connections on TCP port 25. Another, very common case is when you are using an IP address which belongs to a range of Dynamic IP addresses. It is a common practice to drop smtp connections or discard e-mail messages sent from a dynamic IP address.
a. Open your Exchange System Management Console - Administrative Groups - "Groupname" - Server - "Servername" - protocols - smtp.
b. Click right to"virtual standard server for smtp" and choose properties.
c. Change to tab delivery.
d. Then choose the button advanced.
Here you can set the full qualified domain name and you can set a smarthost entry. May be this helps

take also a look at http://codebetter.com/blogs/john.papa/archive/2007/04/02/Problems-Sending-Mail-on-Dedicated-Server-with-GoDaddy.aspx

May 22, 2009 | Computers & Internet

8 Answers

Message Sending from windows 2003 server


GO TO YOUR EXPRESS AND REPLY ALL. MAILS TO EVERYONE IN YOUR BOOK.

Jan 21, 2008 | Microsoft Windows Server Standard 2003 for...

2 Answers

Mail server setup issue


Create the New Account(User), and Configure all the new settings.

Dec 27, 2007 | Microsoft Windows Server Standard 2003 for...

Not finding what you are looking for?
Microsoft Windows XP Professional With Servise Pack 2 (e8503040) for PC Logo

Related Topics:

97 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microsoft Computers & Internet Experts

micky dee

Level 3 Expert

2635 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18331 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Microsoft Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...