Question about Samsung DynaFlat TX-P3071WH 30" TV

2 Answers

TXP3071WHX/XAA Won't Power On

Just bought this TV off of Craigslist. Worked fine that the guys house. We moved it into my car and drove it home, then broght it in. Not a rough ride or anything, everything went fine. Set it on my Ent. Center and plugged it in. The little red light next to the power button on the tv comes on. I hit the power button and "nothing". The light cuts off for a sec and then right back on. There's no picture, sound or anything. I don't even hear a clicking sound in the tv like it's trying to do anything. I would think something happened during the move of it, but it was VERY uneventful. Not even a bad road bump. Is there a way to do some kind of "hard" reset on this thing? So, any ideas? Thanks in advance for all of your help.

Posted by on

2 Answers

Re: TXP3071WHX/XAA Won't Power On

What happened to your tv, think mine did the same

Posted on Jul 22, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has answered 1,000 questions.

  • Master
  • 1,070 Answers
Re: TXP3071WHX/XAA Won't Power On

Hi greetings from belize after your set was pulled from the WALL it got a static causing the microchip to damage ,that is what you call a dead set.take it to a tech to have him look on to replace the chip and your regulator.or the whole power supply.good luck

Posted on Mar 21, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Samsung hls4266wx xaa

my lg p999 cell phone is not working

Feb 24, 2014 | Standard (CRT) Televisions

1 Answer

I have a rca truflat i can't get the dvd to play

are you sure you have plugs and source input the same.the tv has several diff.inputs look on back what inputs you are using then go in menu move input to the same

Dec 24, 2011 | RCA TruFlat 27F520T 27" TV

1 Answer

Picture is wiggling. Like waves.

the power supply has variations meaning your supply is not constant, it is not giving the same outputs voltages.
plse check the following
capacitors which have changed values
semi conductors which are leaking.
thanks for trusting fixya.

Mar 25, 2009 | Sony FD Trinitron WEGA KV-36FS120 36" TV

1 Answer

I just bought a sony triniton 40in trusurround

7 Blinks is the code for high voltage shut down and can be due to a failure in the horizontal deflection circuit.
Since it worked before it was moved, i would guess that you may have disturbed a bad solder connection or possibly cracked a PC board.
IF you feel comfortable doing so you can give a visual inspection of the board
With the power off and TV unplugged remove the back cabinet. Slide out the board and flip it over to check for poor solder connections/cracks in the traces.

Mar 19, 2009 | Sony FD Trinitron WEGA KV-36HS500 36" TV

1 Answer

TV wont power up

lose connection is a common problem of tv, try to resolder but be careful of short circuit ,

Oct 14, 2008 | Mitsubishi VS-4544 45" TV

2 Answers

TS2050J TV (Jensen) locked. How is it unlocked?

Thank you following up. None of the solutions or codes you recommended worked. So I drove to mother's old house and went through things until I found the manual (bedroom bookcase, bottom shelf, under bridge books and old papers). The manual said to hold the display button down 3 seconds. I then drove to mother's new place (assisted living) and tried that. It worked.

Sep 27, 2008 | Jensen TS2050J 20" TV

1 Answer

Philips HDTV does not turn on

look for imperfect contacts on the inside main board.

Jan 21, 2008 | JVC AV-27230 27" TV

1 Answer

Sound but no picture

Basic repair for skilled TV repairman = solder connections on
vertical output IC.........Can be done in home.....T.

Nov 28, 2007 | Sony KV-35S42 35" TV

1 Answer

DIrectv Sat internal box.

You can try eliminating whethor or not the receiver is actually the problem by moving it to another TV and seeing if it works on one that isn't having any problems. Or moving a working receiver onto the TV to see if it will pick up signal with a working receiver. If you don't have any receivers in your house working, then odds are something needs to be serviced outside your home, like the Dish and/or LNB.

Did DirecTV actually come out to the home and troubleshoot at the site? If not, they would have no way of knowing if it's the TV or Satellite that's causing the issue.

Aug 09, 2007 | RCA F38310 38" TV

1 Answer

Dopped tv, worked fine, now not picture but has sound

Most drop damage is in/around the area of the flyback xformer.My Motto==PVAT! With magnifier examine PCB for crack(s).May still be fixable.

Jul 31, 2007 | Sony KV-36FS100 36" TV

Not finding what you are looking for?
Samsung DynaFlat TX-P3071WH 30" TV Logo

Related Topics:

594 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

66413 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Are you a Samsung Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides