Question about Pioneer Audio Shelf Systems

Open Question

Vintage Pioneer CS-33 Hi-Fi Speakers

Hello.
I have vintage Pioneer CS-33 Hi-Fi Speakers. But the problem is that I have purchased only the drivers without wood boxes (cabinets). I would like to restore the cabinets by myself so I am looking for detailed cabinet dimensions / design drawing of these speakers.
Please give me email of original Japan Pioneer Technical Support, because my first mail got to the Israel Pioneer Support and they couldn't help me.
Thank you in advance for any help.
Andrei.

Posted by on

5 Suggested Answers

carlsbiz
  • 1124 Answers

SOURCE: how do you add more speakers to gpx under cabinet

If there are no extra speaker output jacks - then it was not meant to have extras and you really should not add any.. If you do - it would change the ohmage and it could damage the amp..

Have a nice day ;o)

Posted on Aug 14, 2009

  • 3 Answers

SOURCE: Opening up Speakers

i it wood or plastic? if you cant easily pry the 'screen' in front off and there are no screws, your best bet is just to find a new speaker box to put new speakers in... only way to open it is to tear it apart, unfortunatly.. if you do decide to open it, CAREFULLY cut the screen off with a razor or exacto knife, once inside you'll know better what your dwaling wiht...good luck

Posted on Jan 27, 2007

  • 165 Answers

SOURCE: Additional Speakers

hello my frien let me tell you that the system wont accept more speakers or diferent loads per ohm if the total load says 16 ohms by channel thats the total can handle so if you ad more speakers the system turns off before it burns or or have a severe damage........saludos

Posted on Nov 18, 2008

  • 1 Answer

SOURCE: i have a kenwood compact hi-fi system xd-751 the 3

I have a Kenwood hi-fi system XD Series. the three disc draw won't open or play discs. The table shudders when on...can anyone please find a repairer in the adelaide district.

Posted on Feb 10, 2010

  • 2 Answers

SOURCE: Can't get wharfedale melton 2 tweeter to work.

The tweeter has burned out and cannot be salvaged. I also own a pair of (ex) Melton 2s. In the beginning Wharfedale were good at supplying spares (see www.wharfedale.co.uk for contact info and advice). A few years ago after my cat destroyed the 12 inch unit in one, i invested in new insides, including state of the art 12 inch woofers, 4 inch mid range and 1inch tweeters with a good 3 way crossover. The cabinet is great so consider asking a techie friend to do this for you. Please don't just cut out and connect to amp speaker wires! You will get terrible sound and risk ruining both amp and speakers! Best regards Karl (karl@simpson.nom.fr)

Posted on Aug 13, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a replacement for the remote for my TEAC Micro hi-fi MC DX220iDAB system. The remote is RC 1104 but I cant find one. Will another work instead?


Possibly. Try locating another Teac remote for another unit very similar to what you have vintage wise. Often they use identical frequencies, may not have all the same buttons, but will work.

Nov 07, 2015 | Teac Audio Shelf Systems

1 Answer

Can auxiliary speakers be added to a Rowe/AMI Model CD 100K? If so, where do they connect?


Hello,

Yes they can. Above the amplifier compartment you should see the output package. The output package is where the phono speakers are connected to but this can be used to provide output to extention speakers. E1 to E7 tappings left and right provide outputs at different voltages/wattage. E1 left and right is the comon (or ground connection) E2 is the lowest tapping and E7 is the highest. Most people would connect extention speakers to E3 or E4 left & right with the comon connections of the speakers to one of the E1's.
There is also connections for 70 volt line speakers, these are used where long cable runs are needed and the speakers are then fitted with 70 volt drop down transformers to the correct wattage of the speakers. These are available from most good electroic suppliers such as R.S. or Maplins etc.

Regards
Alan Hood
ami-man
Uk

Oct 07, 2010 | Vintage Jukebox External Speakers Shelf...

1 Answer

CAN i purchase speakers for sanyo da 1000


Unless you want the same speakers for cosmetic reasons, you can get a pair of speakers from any Hi-Fi outlet. All you need to know is the max power output of the amp in watts for each channel, and the ohms it puts out. For instance if it says 8ohm 15 watts. You can get a speaker of 8ohms or higher, but not lower. And any speaker above 15 watts.
Actually you can get better quality sound from the speakers as the speakers they often put with these systems are rubbish in terms of hi-fi quality!
PS
Just had a look around the net and the output power in watts is just 8. Couldn't find the ohm rating but most are 8ohm. So any speaker higher than 8 watts will do the job.

Feb 10, 2010 | Sanyo Audio Shelf Systems

1 Answer

Hi,i've got a ipod classic and i want to hear it on the speakers


Hello

Ok, if you have the mini jack, you are half way there, you need a cable wich goes from mini jack to rca. Just plug in the mini jack cable into your Ipod and the rca cbles into the back of the HI FI in a input. Now just set the HI FI to the input device and you should be set. Hope this can help.

Best regards
Andrea

Nov 04, 2009 | LG LX-221 CD Shelf System

1 Answer

Where can I get a cathedral radio with an audio in or USB?


WalMart online, Target online, Radio shack online or Sears local store.

Sears has other vintage stuff, like a turntable/stereo...

Shop Sears tonight and Save $$$ ..

Wait! I sound like a commercial!

I hope this helps!

Sep 11, 2009 | Vintage 1930's Replica Cathedral Radio and...

1 Answer

I have a rockola mystic jukebox & one side of the speakers does not work, i would be greatful for any tips


Either a bad connection somewhere, or one channel in your amplifier is out.

Before you try anything else, switch the amp from 'stereo' to 'mono.' If the speakers come on, your amp is good and you simply have a bad connection somewhere between the amplifier and cartridge (thing that holds the stylus"needle"). Or, possible, but not probable, a bad cartridge.
For a quick fix, switch the amplifier to "mono" and then run all the speakers to the working channel.
In the meantime, if you're handy, try switching the speaker leads and such and see if you can isolate the problem.
Kyle~





Apr 18, 2009 | Vintage Jukebox External Speakers Shelf...

1 Answer

Trying to hook new amp to old jukebox??? 1963 Rockola


Hi Randy,

I take it that the output from the jukebox is mono (only a signal and screen cable) and the connection to the amplifier is a phono plug. You could make up a cable by using a phono inline socket and two phono plugs. I would think that you could purchase one from your local electronic store. If you make one up it should be made using a screened cable.

Regards
Alan Hood
ami-man
UK

Jan 02, 2009 | Vintage Jukebox External Speakers Shelf...

1 Answer

Hifi speakers


An ohm meter can determine only if the coil is open. For an 8 ohm speaker (impedence), the resistance measurement will be around 6 ohms. Why do you think these need reconing? Are they noisy?
Dan

Mar 13, 2008 | Vintage Jukebox External Speakers Shelf...

Not finding what you are looking for?
Audio Shelf Systems Logo

Related Topics:

758 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Audio Shelf Systems Experts

The Knight
The Knight

Level 3 Expert

68352 Answers

 Grubhead
Grubhead

Level 3 Expert

4590 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Pioneer Audio Shelf System Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...