Question about Phones

1 Answer

ACN Video phone CVP-6000

How to set up this kind of video phone, on wireless internet/broadband, the handset don't detect the connection when I try to plug my internet /broadband cable, please help.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

You'll need to make sure that you allow internet sharing with your laptop and video phone. The phone will not work unless the speed is higher than 128 kbps and usualy needs to be connected to a wireless modem or to a laptop/aircard. If you want more help visit myacn.com/digitalphone/support.
Under hot topics there;s info on how to connect using wireless interent, even tough is not the recomended method , it will work if you follow the steps on there. JSantana

Posted on Jun 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i get volume on my binatone 3325 handset


Press C/8 to unmute the microphone.

complete installations
Plug the power adapter
& line cord
into the base station.
Plug the power adapter into a 230Vac, 50Hz
mains socket, the other end of the line cord
into your telephone line socket.
Warning: Always use the line cord provided in the box.
Other line cords may not be compatible and may not work.
Warning: Only use the power adapter supplied.
Others will result in non-compliance with the safety
specification EN60950, and will invalidate any approval
given with this apparatus.
Warning: The Base unit needs mains power for
normal operation, not just for charging the handset batteries.
Installing and charging the batteries
Slide open the battery compartment cover.
Place the 2 batteries with the correct polarity,
as shown.
Slide the battery compartment cover back.
Put the handset on the base and charge for
15 hours before first time use. The handset
beeps when charging starts.
Warning: Only use the AAA size NiMH rechargeable
batteries.
If you have a Broadband Line
If you connect your telephone to a line with a broadband connection, you will need to
insert a micro-filter between the telephone and the telephone line, otherwise you may
get interference between the telephone and the broadband, which could cause
problems.
In a home with broadband, every telephone must have a micro-filter connected, not just the one at the telephone point that your modem is connected to.
If you need more broadband micro-filters, contact your broadband provider.

Connection and Conditions for use:
You can connect your phone to a direct exchange line (DEL) on a local
exchange with its own phone number; to an extension socket
connected to a DEL; or to an extension on an approved compatible
PBX. Do not connect as an extension to a payphone.
The ringer equivalence number (REN) of all equipment (phones, fax
machines, modems, etc.) connected to an exchange line must not add
up to more than 4, otherwise one or more of them may not ring and/or
answer calls correctly. This phone has a REN of 1, and most other
telephones have a REN of 1 unless marked otherwise.
Handset - Base Connection
1) When purchased, all handsets are already registered to the base unit
and should link to it when they are all powered up.
2) To use your cordless handset and base unit together, you must be
able to establish a radio link between them. The signal between the
handset and the base is in accordance with the normal standards for
a DECT phone: Maximum range up to 300 metres outdoors or 50
metres indoors. Be aware that:
> Any large metal object, such as a refrigerator, mirror or filing cabinet,
between the handset and the base unit may block the radio signal.
> Other solid structures, like walls, may reduce the signal strength.
> Other electrical equipment may cause interference and/or affect the range.
3) Do not place close to another telephone, a TV or audio equipment - it
may cause interference.
4) Out of Range warning. If you hear a warning tone during a call,
and/or the sound in the earpiece becomes faint or distorted, you may be
going out of range of the base unit, so move nearer to the base unit
within 20 seconds, otherwise the call may be cut off.

Jul 20, 2014 | Phones

5 Answers

Some times when we answer the phone we get the dial tones and don't the party that is calling


Move the handset closer to the base. The operating range may vary with environmental conditions and time of use. There may be places within your environment that a cordless phone will not work well. If the problem only occurs in certain areas of your environment, you can conclude that there is nothing wrong with the phone.


SAM ANDERSON

Sep 30, 2008 | Vtech Phones

1 Answer

How can I register a Uniden wireless phone handset, model TWX977 to a Uniden wireless base, Model D-1680?


Sorry, you can't. The two phones use completely different communication methods. It would be like trying to feed a VHS videotape into a DVD player. They both contain video data, but in completely different formats.

Sorry if that wasn't the answer you wanted to see. But there it is.

Jan 12, 2014 | Uniden DECT 6.0 Cordless Phone ID

3 Answers

It said base no power


Remove then replace the batteries from the hand set. You should now get dial tojo.

Oct 25, 2010 | Panasonic KX-TGA101S Cordless Handset

1 Answer

Need a handset for my Nortel jazz 6000 phone.


Hi there,

You can try to order on this SITE, look on the link if the availability of the handset replacement was on he list.

Hope this helps

Nov 29, 2009 | Phones

1 Answer

Wharfedale Florence handsets restart on incoming call


Hello,

We are having the same problem as you with our Wharfedale phone. Did you ever find a solution?

Thanks

Oct 29, 2009 | Phones

1 Answer

One 6041 handset will not connect, while the second handset does.


Unplug the entire phone set system from both electrical power and wall jack for approx 2-3 minutes and replug.

It's a reset measure that allows the entire system to reset / reboot as well as stops any and all line feed memory from the live phone line to hold the fault.

Such can be somewhat common when sharing the line with a DSL connection or wireless router is in use.

Jul 27, 2009 | Vtech Cordless 6041 Phone

1 Answer

My cvp-6000 could not locate any internet sgnal what should i do to this??pls elp i am using my broadband pls


Make sure you go to configuration and set the phone to dhcp and nat model, allso make sure the internet is working and is higher than 128 kbps. For more info visit myacn.com/digitalphone/support

Jan 27, 2009 | RCA 25201RE1 Corded Phone

Not finding what you are looking for?
Phones Logo

Related Topics:

1,262 people viewed this question

Ask a Question

Usually answered in minutes!

Top Phones Experts

kakima

Level 3 Expert

96372 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Cindy Wells

Level 3 Expert

4753 Answers

Are you a Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...