American Standard 2748.328 Town Square 5' x 42" Air Bath Tub in White Logo
Posted on Dec 16, 2008

I have an american standard air tub and cannot get the air jets to shut off.  They turn off, but come back on automatically a short time later.  How do I shut the power off?

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

MVP:

An expert that got 5 achievements.

Governor:

An expert whose answer got voted for 20 times.

Scholar:

An expert who has written 20 answers of more than 400 characters.

  • Contributor 35 Answers
  • Posted on Dec 16, 2008
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

MVP:

An expert that got 5 achievements.

Governor:

An expert whose answer got voted for 20 times.

Scholar:

An expert who has written 20 answers of more than 400 characters.

Joined: Dec 16, 2008
Answers
35
Questions
2
Helped
63148
Points
83

Check the air vacuum switch and line as you may have a air vacuum leak. The button that controls the on and off to the jets is an air vacuum switch....It may have a slow air leak in the line or connections that is activating the on and off control

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Hydromassage 1063

Not normal for that to happen but the jet faces on the two back jets may be turned off or down.
Try turning the face of the jet clockwise and see if you get more water flow out of each jet.

Rod
US Parts Center
0helpful
1answer

Have an American standard whirlpool tub. the on/off button is stuck on on. now the only way to shut the jets off is to flip the breaker to the bathroom. how do I fix this

This sounds like the air switch in the motor is not working properly. You will need to remove the pump from under the tub to access the air switch located in a housing on the motor.
Replacement Air Switch will cost you about $20

US Parts Center
1helpful
1answer

American standard jet bath tub black particles coming out of jets

The problem you are experiencing is common to many jetted bathtubs.It is a result of dried bathing water in the tub. There are a couple of solutions to resolve this ongoing problem.
  1. Use your tub more frequently as the water will not have time to fester in the pipes.
  2. Use a cleaning solution made for cleaning the pipes on jetted bathtubs once every three months.

You find Cleaning and Maintenance Products for jetted tubs at the following website. US Parts Center


Rod
US Parts Center
888-521-6183
0helpful
1answer

My American Standard spa tub Williamsburg Elite Model 2425E has a couple of the eight jets failing to jet, the two on either side of the rear left corner.

sounds like maybe the jet faces are turned off. see if they turn one way or the other and they may open and spew water out for you.
0helpful
1answer

Water runs very slowly when trying to fill jet tub.

Check to see if there are any screen type filter to the tub as debris may be clogging it. Also air lock can occur but it should not be causing problems as 90% clear them selves.....
5helpful
1answer

Two jets stopped working

Most of these jets turn to close. Check if you turn the nozzle. Hope it helps
0helpful
2answers

American standard air tub motor hums

sounds like the motor might be on a dead spot. try turning the shaft of the motor 1/2 turn or so and see if it will kick in. If not you may have a bad motor of some debris in the motor preventing it from starting.
Jan 01, 2009 • Home
Not finding what you are looking for?

590 views

Ask a Question

Usually answered in minutes!

Top American Standard Home Experts

john h

Level 3 Expert

29494 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

deton8 von Splosion

Level 3 Expert

3342 Answers

Are you an American Standard Home Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...