Question about Toshiba 53H71 53 in. Rear Projection Television

1 Answer

Location of the STK392-110

From what I have read online the convergence problem and "touch focus error" on the blue color is caused by bad STK392-110. What ckt board are they on? There are two ckt boards connected to the blue tube, one on the socket and the other on the neck. I didn't see any ICs on those boards. Do I get to these ICs from the front or back of the TV? Where are these ICs located?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 3,130 Answers

The convergence IC's are large 2x3 inch(about) black in color IC's that stand up against a metal heatsink on the main printed circuit board. They will have white lettering on them that will plain as day when you see them. Make sure you replace these IC's with the manufacturers replacements and not some cheap copy, if the IC's cost less the 15 bucks a pop, they are cheap subs. Also do not forget the heatsink compound on the back of the new replacement IC's before you reinstall them. Good Luck

Posted on Mar 20, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Touch focus error blue


The tv HYPER board it is dead aslo known as a tv convergence board.Tv have a convergence problems,it is dead.Tv Magic Focus button no longer response give error messages.Tv have any colors lines R,G,B mis alignments,have colors shadows pictures or 3D picture look alike?Yes,than the tv HYPER board it is dead also known as a tv convergence board must have it components parts replaced like 2 STK convergence ICS and some or all of resistors too.To fixed the tv HYPER also known as a tv convergence board to solved the tv convergence pictures problems.The tvs shops will cost u like $300-350 for parts and labors.

Aug 12, 2011 | Toshiba 42H82 42" Rear Projection...

2 Answers

Toshiba 50hdx82 tv touch focus error blue is bowed.


Convergence is dead.Know how to solders.Must replaced the 2 Convergence ICS,and all it resitors.To do it ur self repair buy a convergence kit at Tv repair World.com,Repeairkits.com.The shop will cost u $300 for parts and labors.

Feb 04, 2010 | Toshiba 50HDX82 50" Rear Projection...

1 Answer

Trying to manually fix color convergence on Toshiba 57H81


The convergence ICs and the six 1.8 ohm 1watt resistors need to be replaced. You can get the convergence repair kit for your model at www.tvrepairworld.com which has the Two Convergence ICs and the six resistors plus the CD with instructions on how to do the repair.

Dec 02, 2009 | Toshiba 57H81 57" Rear Projection...

1 Answer

Pcture problem


Replace both STK392-110 convergence IC's with Toshiba or
Sanyo brand...............no cheap junk !!.............T.

Aug 04, 2008 | Toshiba 43H71 43" Rear Projection...

1 Answer

Convergence problem


Replace the Convergence amplifiers. Mine did the same. It was like watching a 3D movie without the glasses. It is not hard to do for someone who knows their way around a circuit board repair. Otherwise call a reputable service shop.

Jun 17, 2008 | Toshiba 50H81 50" Rear Projection...

2 Answers

TOUCH FOCUS ERROR on Projection Toshiba TV


My 57H81 won't converge, plus I get the "touch focus error" message. I could get manual convergence of blue, but not red. Plus, during touch focus the red would not move horizontally

Nov 25, 2007 | Toshiba 57H81 57" Rear Projection...

1 Answer

TOUCH FOCUS ERROR


The convergence IC`s need to be replaced and the related low ohm resistors need to be checked for proper value.

Oct 15, 2007 | Toshiba 57H81 57" Rear Projection...

2 Answers

Convergence problem????


Yes Its the stk Packs,They are usally 18

Jul 23, 2007 | Toshiba 42H82 42" Rear Projection...

1 Answer

Convergence problem


sounds like bad solder connections on convergance ic solder then if the problem still there replac ic

Oct 24, 2006 | Toshiba 57HX81 57" Rear Projection...

Not finding what you are looking for?
Toshiba 53H71 53 in. Rear Projection Television Logo

Related Topics:

257 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75846 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Jaime Hernandez

Level 3 Expert

2336 Answers

Are you a Toshiba Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...