Question about Combination Televisions

Open Question

Emerson dora explorer dte313 tv

I have bought the dora tv and dvd as a combo deal at walmart 2-3 years ago. i can turn on both and usually i could push the av button on the tv remote and i'd receive the dora explorer picture and then the movie would play now all i get is the blue screen even pushing the av button.we have tried unplugging and plugging back in, tried the menu, and nothing! i can't find my manuel or find one online.what can i do?
thanks heidi I HAVE SAME PROBLEM

Posted by on

6 Suggested Answers

techman
  • 3130 Answers

SOURCE: Can't Get Any TV picture on mySharp 27DV-S100 TV-VCR-DVD combo

open back up the set and look closly at all of the plug connections and cables as you might not have pulled one out all the way but may have in inadvertantly pulled on a cable of one of them and pulled one out have way or just a little. My freind it happens to the professionals all the time. Make sure you check all the plugs on the VCR as well as the tv that they are instraight and flush. Good Luck Ps Please dont forget to rate this.

Posted on Oct 15, 2006

SOURCE: Locked Tv blue screen with Lock icon lower left corner

Hold down the tv call button on the remote for a few seconds and it should unlock.

Posted on Nov 28, 2007

  • 1 Answer

SOURCE: Emerson TV won't stay on

Someone told me that the timing is off in the vcr and that they would have to rebuild the whole tv, which is more expensive than buying a new one. I saw on another site that someone has to leave a vhs tape in the vcr for the tv to work, I think that I am going to try that.

Posted on Jan 10, 2008

  • 81 Answers

SOURCE: I have an emerson EWC27T3 tv/vcr/dvd combo which I

Manual is here:
http://www.emersonaudiovideo.com/support/manuals.aspx
It lists where to obtain replacement accessories, such as a remote control.

Another possibility is:
http://www.remotecontrolwarehouse.com/EMERSON/EWC27T3.html

I have no affiliation or experience with either, but I hope these help.

Posted on Sep 13, 2009

  • 1 Answer

SOURCE: Can't change TV to AV input.

dont bother trying to do it but then i got the same problem :)

Posted on Feb 04, 2010

  • 1082 Answers

SOURCE: just bought a used 1998 20 inch tv vcr combo with

I should think most any universal remote will operate it.
You can look here for a user guide, but you'll need the model number off the back of it.
http://www2.panasonic.com/webapp/wcs/stores/servlet/PNAEndecaSearchCmd?N=779832097&Ne=&Ns=&Nr=&No=0&Ntt=75410&Ntk=CategorySearch&URL=vSupportSearch&cn=CRT+TVs&cmTag=true&catalogId=11017&storeId=15001

Or use this email message page to ask Panasonic. Again, give the model and serial number
http://www2.panasonic.com/consumer-electronics/support/Contact-Us.2

Posted on Feb 25, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

0005381828517walmart product codes


http://www.walmart.com/ip/Emerson-19-Class-LCD-720p-60Hz-DVD-Combo-HDTV-LD190EM2/16775698

Aug 28, 2014 | Emerson EWC20D3 20 in. TV/DVD Combo

1 Answer

Please inide code for tv emerson


Hello
You havent specified what type of Emerson combo is yours. Anyway I hereby posts some Emerson combo codes.
TV/VCR
0227 0233 0254 0264
.... 0265 0266 0310 0325 [0039 0252]
Where the code is listed as [### ###] the first is for the TV and the second is for the VCR. Otherwise just the one code operates both the TV and the VCR

TV/DVD combo
0456
TV/VCR/DVD combo
0456 [0458 0227]
DVD/VCR combo
0456 [0458 0227

Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand

Mar 15, 2011 | Emerson Combination Televisions

1 Answer

Emerson doesnt have insignia codes


wat code can i useto punch in for insigma tv

Nov 02, 2008 | Emerson EWC19T3 19 in. TV/VCR/DVD Combo

1 Answer

Direct Tv & Emerson Jumbo


I have an Emerson Combo Model EWC19T3 and a Emerson DVD/Vidio remote that is not working. I desire it to turn on and off the TV, raise and lower the volume and go to mute.
The only information inside the remote is listed below:

342;01HB;x3 Triple Combo;BNE200F01011;NECIC;sum3AA;ECR6:15v;N9353UOBW012
The TV is hooked up to Directv, the remote has new batteries

My email: Alank@netnitco.net

Name Alan C. Keller

Jun 17, 2008 | Emerson EWC19T3 19 in. TV/VCR/DVD Combo

1 Answer

Toshiba TV Combo MW24FP1, DVD player doesn't work on some discs


This is a common problem for all combo units. The high voltage of the TV section attracts large amounts of particulate dust from the air and often it collects inside the DVD unit. The best way to deal with this is to clean the lens of the DVD unit u sing a cotton swab and alcohol. The store bought "cleaners" MAY work, but that is rare. These cleaners are nothing but small brushes embedded into a disc. They attempt to brush off hte dust. This rarely works. Open up the unit (if you feel comfortabel in doing so) to access the DVD section. Remove the top cover and carefully clean the lens. That should resolve the problem.
Dan

May 21, 2008 | Toshiba MW24FP1 24 in. TV/VCR/DVD Combo

1 Answer

Tv wont turn on.


try cutting power off and wait 15 to 20 minutes. also try another outlet depending how much power u r pulling thru the outlet u had it in. Had same problem and customer service said unplug for 3 min....not long enuf...so try 15 to 20 min and plug back in.

Apr 10, 2008 | Toshiba MD20F51 20 in. TV/DVD Combo

2 Answers

TV remote


the remote for your durabrand combo unit is part number NE207UD and can be found online through many retailers, as far as i know there are no universal remotes that support the durabrand codes, if they do it will be under a different manufacturers name.

hope this helps,
trin

Nov 16, 2007 | Wanlida Group KTD-0700M 7 in. TV/DVD Combo

Not finding what you are looking for?
Combination Televisions Logo

Related Topics:

320 people viewed this question

Ask a Question

Usually answered in minutes!

Top Combination Televisions Experts

The Knight
The Knight

Level 3 Expert

68323 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Are you a Combination Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...