Question about Sungale DVD-2026 DVD Player

Open Question

TV remote has no input button, how can I get DVD to play??

Have Sungale DVD2026 and RCA TV. Remote for TV does not have input button. How program TV to work with the DVD player?

TV is RCA Model# G27220TN
Serial # 209440060

Please help!

Thanks!

Posted by on

6 Suggested Answers

snakehead
  • 1070 Answers

SOURCE: DVD player will not play

my brother the only way you can override that lock is that the microchip in the set has to be lift out of the set,by doing that the chip will reset itself then the chip can be resolder back contact a tech to do it for you.goodluck.

Posted on Mar 30, 2007

SOURCE: Code to program my RCA Universal Remote to work my Jwin DVD Player

Jwin's support page says that Jwin products do not contain the universal codes.

Posted on Jul 01, 2008

SOURCE: sungale dvd player 2026

I have the same problem many times. I simply rotate the player 90 degrees on it's horizontal axis, so that the opening is facing toward the ground. Then, hold the door open and press the "Open" button. It's pretty ghetto but it always works for me.

Posted on Aug 08, 2008

  • 51 Answers

SOURCE: need remote

http://www.remotes.com/remotes/servlet/rs?a=gmi&uuid=12306100697510&smodel=DVD2026&brand_pn=SUNGALE_DVD2026

Posted on Dec 30, 2008

  • 1 Answer

SOURCE: dvd code for directv remote

what is the code for sungale DVD2030 5.1 dvd player?

Posted on May 07, 2010

  • 8457 Answers

SOURCE: I need a remote control

Try website like Remotes.com to buy an original remote control or a very close clone remote.

Posted on Apr 26, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a sansui flat with build in DVD but don't have a remote the DVD will load but when push play it says operation not possible with disk what is this do I just need a univ.remote


First, check which input you have the TV set on. There may be an Input button on the side of the TV. (On the SLEDVD197, the button just below the DVD Eject button.) Just press Input and use the Channel Up/Down arrows to navigate the menu to change to the DVD. Press Input again to Enter the selected option.

With the TV in DVD mode, try pressing Play again. If you still have the error, check the region code for the disc. The "Operation not permitted" messages is usually that something on the disc is locked. Frequently, it's the result of using a different region code disc than the DVD player knows how to interpret. Try a different DVD.

If your TV doesn't have the Input button on the TV, you absolutely need a universal remote. However, you will want one that can match the TV/DVD button, the Input/Select button and the Menu button. Usually this requires a higher end remote; you also need a remote that was programmed at least 6 months after Sansui released the TV. If you do have the Input button on the TV, a universal remote may make using the TV easier.

I hope this helps.

Cindy Wells

Apr 13, 2015 | Sansui DVD & Blu-Ray Players

1 Answer

How do I connect my Sony DVD DVP-FR310P player to my RCA RLED2845A TV? No input button on remote


You probably will have to substitute a universal remote that can be programmed to control both your RCA TV and your Sony DVD player.

Jan 11, 2015 | Sony DVD & Blu-Ray Players

1 Answer

I have bought a universal remote for my dvd player and Sungale is not listed, and I need a code.


I've never heard of that manufacturer, so I'd suggest searching Google for "Sungale remote control codes" and you might find others that are having similar problems with their universal remotes.

Apr 06, 2013 | DVD & Blu-Ray Players

1 Answer

Isn't this just a simple hookup? What am I not doing?


You either need to change the input source. Currently the source is TV, depending on how you connected the DVD player to the TV, it should be composite (A/V), component video or HDMI. (S-video is also a possibility. Very few DVD players are connected on the RF (coax) input which might be channel 3 or 4 without having a converter between the DVD player and the TV.)

Look on your TV remote for a button marked Source or Input. You may also find this button on the TV. (On some TVs, this may also be accessed through the menus.)

How did you connect the TV and the DVD player? If your audio and video were connected via three RCA plugs (yellow, red, white) on each end, then use the composite video input. If you used cables with 3 RCA plugs for video (yellow, green, blue) and 2 for audio (red/white), then switch to the component input. If you used HDMI which carries audio and video in one cable (with rectangular ends), then use the HDMI input.

Some older TVs only have the Source/Input button on their original remote. Not all universal replacement remotes have this button, you may need a different remote. Those that do may require you to try additional codes for your TV manufacturer to enable the button. (The on./off buttons often will work with more of the codes for a brand.) The ones that can be programmed via a USB connection to a computer are most likely to support the function. Please add a comment with the type of TV for additional help with this.

I hope this helps.

Cindy Wells

Apr 21, 2012 | Sony Dvp-sr500h 1080p Upscaling Dvd Player

1 Answer

Whats the code for the sungale dvd2028


It depends on what remote you are trying to program to the Sungale DVD2028.

Almost every remote control that is used today can be found at:

http://www.remotecentral.com/search.htm

Enter the model number of the remote you need codes for in; 2.Search For Downloadable Files.
Once you see the remote you are using click on View Details, click on Download File.
Find the code for your device and program the universal remote control as indicated by the manufacturer.

Feb 09, 2010 | Sungale DVD-2026 DVD Player

1 Answer

How do I get from cable TV to DVD player


All you should have to do is press the dvd button on your remote to go to the dvd player. Then press the vcr button to go back to the cable tv, if it is hooked up the same way as mine. And you can tell if it is by putting in a vhf tape and you can start watching it play. Otherwise you will need to press the input button on your tv remote until you see the vcr or dvd main screen. from there press the dvd button on your remote for the dvd player or the vcr button for your vhf. After you are done with watching your movies and wish to go back to the cable or tv programs use the tv remote and press input until the shows come back on

Aug 16, 2009 | Philips Magnavox MWR20V6 DVD Recorder/VCR

1 Answer

Where do I buy a remote for DVD2026


Original remote for Sungale dvd 2026 is hard to find. Right now I am selling one RC on Ebay. It is a second hand but in working order. I am selling RC because my dvd was damaged in a blackout

Aug 03, 2009 | Sungale DVD-2026 DVD Player

1 Answer

I need the codes for a sungale dvd player


manufacturer code for dvd2026 of north america

Mar 04, 2009 | Sungale DVD-2026 DVD Player

1 Answer

Dvd code for directv remote


what is the code for sungale DVD2030 5.1 dvd player?

Nov 30, 2008 | Sungale Progressive Scan 5.1 Channel DVD...

1 Answer

Wrong disc message displayed on screen for dvd-2026


I found these posts. I have only been able to get the fix to work once, though. :(
I found a "hack' to make mine work :)
1. Open the tray
2. Press "Setup": Menu Screen should appear
3. Press "8-8-8-8" ( if you changed the password, you might have to change it back to 8888 ) The region number should appear on upper right corner. No other notation. Typically just the numeral "1".
4. Use the right (->) or left (<-) arrow keys to change the region to 255 for all regions.
5. Use the up or down button to go to 3001 and 4000. I had to change 4000 to 4001 to get mine to work,
6. Press "Setup" to exit.
It was a big relief to find this hack, because I misplaced my receipt and thought I was simply out of $30.
Region code hack posted by jeff777, December 15 2004:
This works.

1) With remote control, power the DVD player on.
2) With remote control, open the DVD tray.
3) With remote control, select SETUP.
4) With remote control, press the VOLUME UP button, then the VOLUME DOWN button, then the VOLUME UP button again and finally the VOLUME DOWN button again.
5) You should now see a number 2 on your screen. If you do not, this hack will not work on your system or you have done something wrong. If you do see the number 2 on the screen, proceed to 6).
6) Use the LEFT and/or RIGHT arrow to select the number 255.
7) When you see the number 255, press the SELECT button.
8) Press the SETUP button again to end procedure.


Region code hack posted by RayH, May 18 2005:
Newer Sungale 2026 players are a bit easier to set up:

1. Open the tray

2. Press "Setup": Menu Screen should appear

3. Press "8-8-8-8" Region number should appear on upper right corner. No other notation. Typically just the numeral "1".

4. Use the right (->) or left (<-) arrow keys to change the region. "255" all region.

5. Press "Setup" to exit.

Tested Region 1, 2, 3, 4, and 5 PAL and NTSC disks. They all work just fine on an older US NTSC TV. It's a little bigger than the Cyberhome, but works much better. There is no jerking at chapters with either factory or homemade discs. Plays VCDs just fine.

Sniff around the internet. This machine is availabe as of 5-18-05 for about $29 plus shipping ($11). Arrived in two days.

Other hack posted by Hurricane, January 23 2006:
If you do the Setup>8888 thing you get a region code 1-6 & 255.
Well if you press up and down on the directional pad you also get 3001 and 4001 these can be changed to 3000 and 4000, I know that one of them is a Macrovision on/off flag but I don't know what the other is.
Region code hack posted by Streetmedik, March 25 2006:
I have the Sungale DVD2026 I have tested this with DVDs from various regions. It works.
1. Power on
2. open the tray.
3. ON THE REMOTE press the VOLUME up, down, up, down.
4. ON THE REMOTE press SETUP
5. ON THE REMOTE press the up and down arrows to go between the macrovision/region codes.
6. ON THE REMOTE press the left and right arroes to change the values.

Macrovision
3001 on
3000 off

Regions
1,2,3,4,5,6 = individual regions
255 = all regions

7. ON THE REMOTE press setup again and you are set.
You can change these values again and again If you just want to play around.

Mar 22, 2008 | Sungale DVD-2026 DVD Player

Not finding what you are looking for?
Sungale DVD-2026 DVD Player Logo

Related Topics:

397 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sungale DVD & Blu-Ray Players Experts

janman

Level 3 Expert

324 Answers

Scott Eckhardt

Level 2 Expert

50 Answers

sonic boom...
sonic boom...

Level 3 Expert

1557 Answers

Are you a Sungale DVD and Blu-Ray Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...