Question about Hotpoint Aquarius WD63 Front Load Washer/Dryer

1 Answer

On/off button and mini load LED's flashing ON Hotpoint WT540

After completing a load I set the machine to complete a fast spin again. It did this but then the machine started making a funny noise and the on/off LED and mini load LED began flickering.
I turnt the machine off at the socket as the cancel button didnt work.
When turnt machine back on all was back to normal, but now the machine wont spin almost like the drum has jammed. But I can spin it easily by hand. Please help!

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Hotpoint Master
  • 3,463 Answers

Make sure there is no water left in m/c, lay hose down to draln completely, try spin again, if still no go, remove motor and check brushes.

Posted on Dec 17, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Does the outer drum on a hotpoint WT540


All outer tubs on most Washing Machines these days are sealed.
Therefore you cannot split the tub to get inside and change the bearings. instead you have to change the whole tub assembly as a complete unit. Not an easy job.

Oct 27, 2014 | Hotpoint Washing Machines

1 Answer

Drum will not turn


Again need more info like model # of dyer or at least brand name and type

Jan 30, 2013 | Hotpoint Aquarius WT540 Front

1 Answer

Is flashing on mini load and on off is flashing too? make wt540


Rebecca, try unplugging it and plugging it back in. Your looking for a reset. If that doesn't work, let me know.

Feb 25, 2011 | Hotpoint Aquarius WMA42 Front Load Washer

1 Answer

My hotpoint washing machine wt741 will do nothing except fast spin, LED display is flashing TEST, it will not stop doing this unless i switch if off, what can i do?


Hi,
To get out of it you need to press start, the display should go daft. Press start again and the display should settle down. Now press the on/off button and the start button at the same time and hold them down for a few seconds until the display shows d-end or d-off.
Your machine should now work.

Unplug your appliance before working on it

Thank You

Sep 12, 2010 | Hotpoint Aquarius WMA42 Front Load Washer

1 Answer

How can I unscrew the drain outlet at the bottom front of my Hotpoint WT540? Our machine has completed a wash and drained, but isn't spinning. The door light flashes when I try and run a spin. I decided to...


Keep trying to unscrew it, as it should come right out for cleaning. A little water will come out too so put a small tray under the machine first.

Look at my other solutions, as for DOOR light flashing.

Apr 02, 2010 | Hotpoint Aquarius WD63 Front Load...

2 Answers

Hotpoint wf540 stopping on a rinse and spin and


check pump/filter/outlet hose for blockages. if ok, check pressure switch (disc shaped item at top of machine with 4? wires and a tube) by blowing into it gently - should hear clicks, then blow into tube to pressure chamber - should be clear.

Oct 26, 2009 | Hotpoint Aquarius WF000 Front Load Washer

1 Answer

Rinse cycle gets stuck


Most models have a timer relay that times out when a cycle is over. It may be located behaind the front panel - It's worth a shot

Oct 15, 2009 | Washing Machines

3 Answers

Hotpoint WT540 1400 spin. Flashing Rinse hold and Mini load LED


Had exactly the same last week - Jan 09 - and had to call out Hotpoint engineer - £99.98 all inclusive of parts - it was the main controller board, so thats under guarantee for another 12 months. all working and spinning as should be and only took around 30mins.GS :)

Dec 29, 2008 | Hotpoint Washing Machines

1 Answer

Hotpoint aquarius wt540 wont pump out water


Hiya Barry, I have the same machine and for the last 3 days have had the exact same problem...mini load and reduced crease as well as power light flash right when it comes to drain...?

I have scratched my head and done lots and lots of research, reckon I could design and build my own washer now lol, anyway, I fitted a new pump and ran it, thinking this is it sorted, went out and got a call from our lass...doing it again.

Right, gonna have to get me hands dirty...I removed the drain hose (Ignore the pump for a second, I'm talking about the grey hose that goes from the pump to the sink) from the sink and poked my fingers as far as they would go...debris, I then removed it from the other end (Pump) so I had a long hose in my hands, not attached to anything at either end....cleared it and again, loads of debris (Fluff, plastic etc) and put it all back together...turned the old fella back on and running a wash right now as we speak...happily spinning round at 1400rpm and throwing gallons of water down the sink...I would consider it fixed.

So I can most definately tell you that you have a blockage somewhere mate, I'd get your hands in the toolbox and pull that pipe off, doesn't require any level of experience, just the ability to put things back as you found them...

Hope that helps

Nov 23, 2008 | Hotpoint Aquarius WD63 Front Load...

1 Answer

Hotpoint WF340 - wont complete programme


hi without looking at it i would think that the control board behind the timer knob has broken down these can quite pricey so shop around before you buy one,hope this helps.

May 11, 2008 | Hotpoint Aquarius WF000 Front Load Washer

Not finding what you are looking for?
Hotpoint Aquarius WD63 Front Load Washer/Dryer Logo

560 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts

hungoverrr

Level 1 Expert

5 Answers

Todd Arndt
Todd Arndt

Level 3 Expert

2044 Answers

puggy666

Level 1 Expert

47 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...