Question about Silver Cross Balmoral Pram Carriage Stroller
Have old silver cross or marmet pram from 1970 , need chrome hub caps with 3 grooves to fit on wheels
there are latches under the fabric on both sides of the hood, it is about an inch down from the front of the hood where it attaches into the main body of the pram, press then both in and lift up, hope you get sorted
Posted on Mar 07, 2008
Have a silver cross dolls pram. Not a clue what age it is. Needs restoring and really want to get it looking like new! dont have pounds to spend on it. Any ideas
Posted on Jun 23, 2008
i have a silver cross travel system and can only seem to fit the rain cover on properly when its in pram mode how do you do it when the car seat is attached
Posted on Jul 20, 2008
hi ithompson200..here's a link for silver cross where you can email themabout the spare part or contact the retailer where you bought yourstroller..hope this helps.please let me know the outcome..good luck!!
Posted on Jun 04, 2009
hi echapman61... here's a link for silver cross where you can email them about thespare part.hope ithelps..please let me know the outcome. thanks for using fixya..goodluck!!
Posted on Jun 07, 2009
This is a little difficult to explain in text, but here goes..
Recline the seat unit to it's lowest position.
On the arm rests of the pram, there is a piece of fabric covering each arm, these are attached via press studs, undo these and fold them backwards onto the seat area.
This will reveal a plastic hook underneath, these are folded down and need to be raised upwards.
Next, get the Ventura carseat and ensure that the handle is in the carrying postition (i.e facing upwards). On the base of the carseat at the back (directly underneath babys head) there is a distinct cut out shape that will fit snugly onto the bumper bar of the pram, place the carseat on top of the pram (so it is positioned on the seat facing you) and push it down gently. If this is the first time that you have done this, the material may be quite plumped up so you may need to push a little harder.
At the base of the carseat handle either side, there is a button (this is used to adjust the handle position) push these buttons down at the same time and move the handle backwards (away from you) until the handle makes an audible 'click', this means that this has now secured onto the plastic hooks that you first exposed on the arms of the pram.
This should now be securely fastened onto the pram.
I would also suggest that you visit this website as per the link below and download the user manual for the 3D so that you have this is picture format in front of you.
I hope this helps.
Posted on Sep 23, 2009
Tips for a great answer:
Jun 19, 2010 | Silver Cross Balmoral Pram Carriage...
Jan 20, 2010 | Silver Cross Balmoral Pram Carriage...
Oct 09, 2009 | Silver Cross Balmoral Pram Carriage...
Jul 17, 2009 | Silver Cross Balmoral Pram Carriage...
Jun 30, 2009 | Silver Cross Kensington Pram Stroller
Feb 24, 2009 | Silver Cross Sleepover Classic Stroller
Nov 02, 2008 | Silver Cross Balmoral Pram Carriage...
Oct 14, 2008 | Silver Cross Baby Strollers
May 01, 2008 | Silver Cross 3D Stroller
166 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: