Question about Compaq Presario s4020wm (DK214AR#ABA) PC Desktop

1 Answer

No desktop or anything else appears upon start up

When I startup my compaq presario v6000 nothing appears. just the comaq desktop picture. no desktop or anything. cannot bring up windows or anything

Posted by on

  • Leslie May 11, 2010

    enter the bios and set boot option did you do a bios flash it sounds as if you did and if you did and it was interrupted you will more than likely need a new board unless you know a tech who can temp take the bios from another board and start yours

  • Chase May 11, 2010

    Does it display any thing else on the screen at any time or does it show the Compaq logo - go black - then show the logo again?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Expert
  • 82 Answers

Format the pc & try loding the operating system gain......................................Sameearyan

Posted on Jan 14, 2009

  • Sameer Raut
    Sameer Raut Jan 14, 2009

    format the pc & try loding the operating system again......................................Sameearyan

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Blank display


maybe your grapic card problem

Jul 01, 2009 | Compaq Presario SR1000T (568657) PC...

1 Answer

Only shows compaq on screen


I work with Compaq computers now and usually your problem points to the hard drive. I know Compaq's will stay on that screen if the hard drive has failed. Try another hard drive would be my suggestion.

Hope this helps.

Mar 02, 2009 | Compaq Presario 5000 PC Desktop

1 Answer

Presario v6000 Sart up.


After reboot, before restart, take the recovery CD out and let the computer start from hard disk. Let me know what happens.

Nov 30, 2008 | Compaq Presario s4020wm (DK214AR#ABA) PC...

1 Answer

Need audio driver of compaq presario V6000


Here's a link to the audio drivers for the V6000. You will need to download both that are listed under audio.Don't forget to rate me (fixya). thanks

http://h10025.www1.hp.com/ewfrf/wc/softwareList?os=228&lc=en&cc=us&dlc=en&product=1842078&lang=en

Jul 31, 2008 | HP Compaq Presario V6000T Notebook

2 Answers

Screen stays black


Your inverter board is bad. It is time to change it.
This manual page 152 will show you what is involved.



http://h10032.www1.hp.com/ctg/Manual/c01035886.pdf

Mar 19, 2008 | HP Compaq Presario V6000T Notebook

3 Answers

User manual for compaq presario v6000


Is the microphone available on compaq presario V6000 model for using skype

Feb 19, 2008 | Computers & Internet

1 Answer

Compaq Presario V6000


It actually sounds like you might have a hardware problem. If you're comfortable with opening the computer, remove any recently added hardware. If no hardware was added, then it may be necessary to remove each of the components in the following order and retest the boot process until it functions, and replace the last part removed.

Pressing F8 and/or reading the CDROM that early in the BOOT sequence is not possible, so it's in a hardware check.

Floppy, CDROM, SoundCard, Network Card, <any other cards>, extra RAM, except one or two to be able to boot.

It is also possible that either internally or externally, a cable may be loose. If you are able reseat all the cables, this may make it work. Stuff can come loose and the computer freaks out.

Lastly, if you feel like making sure that component is the problem, start plugging all pieces back in and all may work. This would mean that something was loose.

Nov 26, 2007 | Compaq Presario s4020wm (DK214AR#ABA) PC...

Not finding what you are looking for?
Compaq Presario s4020wm (DK214AR#ABA) PC Desktop Logo

Related Topics:

126 people viewed this question

Ask a Question

Usually answered in minutes!

Top Compaq Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18343 Answers

Abhinandan  Patil
Abhinandan Patil

Level 3 Expert

562 Answers

Are you a Compaq Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...