Question about Electric Strider Midi 4 Wheel Mobility Scooter - Midnight Blue

2 Answers

Strider chair starts and stops

My wife has a strider chair that shuts down after she is using it. the little green button comes on and blinks when it stops. Then she shuts off the key, turns it back on, then it goes for a bit and shuts back down again..any help?

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

Troubleshooting for this model is now available at
http://www.striderscooterservice.com/blink-codes.html

Posted on Jul 23, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Electric Master
  • 1,358 Answers

Could be the batteries, the batteries can't take the load, is it possible to borrow some batteries to be sure ,

How much use has it had ?has it been in storage , then the batteries suffer,

Posted on Jun 13, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When i plug the cable into the joystick control (MK5SOJ+) all the lights around the horn button blink on and off motor wont engage and it won't shut off til pull out the cable do i need a


Hello,

When you say the power cable I hope you mean the cable that comes from the main control module under the chair. I want to make sure you are not talking about the AC power cable that plugs from the chair to a wall outlet. So if we are on the same page about the cable is the one going from the joystick to the main control module under the chair and all you do is plug it in and the green speed lights start to blink this would indicate the joystick is bad.

Jan 23, 2015 | Invacare Pronto M51 Power Wheelchair

1 Answer

Shuts down after 5 minutes blinks green


Once the set shuts down, wait for the unit to stop blinking. Once it stops hold in the input and menu buttons for 5 seconds. The TV will then give you an error code. A 6-1 or a 1-8 error code would indicate a bad Color wheel. Which I think is the problem you have.

Jun 19, 2012 | Mitsubishi WD-65735 Television

1 Answer

My mother have a pride jazzy serial j-913718 joy stick blink and keeps blinking, I tried what is sugested for the model 1103 but no reults, could someone please help me


Hello,download:SHOPRIDER SERVICE MANUAL 2007 1-800-743-0772.Save as a PDF File to read via an Adobe Reader.Hope this was of help,Colin.

Nov 23, 2011 | Pride Jazzy 1103 Ultra Standard Power...

1 Answer

The Screen Turns Green then shuts itself off? Is this the Bulb or something else?


My sony 65Ws500 model about 4 months ago it started turning the screen all blue as soon as I turned it on. it stayed blue for about an hour then come back on normal now when I turn it on it will shut down and I get a small red light flashing 8 time then pauses and does it again 8 time then pauses then again and so on. I took back panel off. I turn on tv The blue bulb gets very bright and the green and red projection bulb goes out and now it shuts off. and the blinking starts it a code flashing but don't know the code to find out whats wrong. would someone help if u can been wife and I laid off from work 3 months now cant afford tech prices on our employment. wife and I has 2 little girls to raise. along with the rest of u parent out there and one getting employment cant offord repairs. Thank U. Adams01220@yahoo.com

Feb 13, 2011 | Sony KP-65WS500 65" Rear Projection...

1 Answer

How do i clear an error 5100 from my canon pixma mp250?


Try this technique. Turn off printer. Hold down Stop/Reset button with one hand and turn printer on with other hand. After green light comes on for the ON button, press the Stop/Reset button two times and you should see the green light blink off and the orange alarm light blink "on" with the first press and then the green light comes back on for the power button and the orange light goes off with the second press (if you did it correctly). Now, you need to hold down the ON button about five seconds, then let go to shut OFF the printer. When you turn it back on, the printer should be back to the factory original condition. Make sure you set all your printer properties the way you want them again from your printer properties dialog boxes because some of the settings may have been stored in the printer's EEPROM, which you just reset to get rid of the offending alarm code.

Jan 14, 2011 | Canon Pixma Mp250 Allinone Inkjet Photo...

1 Answer

Green power button flashing and wheelchair stops


The number of lights that are blinking indicate what the problem is. Visit this site to locate the type on controller on your power chair and you will be able to see that the blinking lights mean:
http://www.pgdt.com/scenter/diagnostics/diagvsi.html
Try to reset your manual brake release as this is a common problem.
If you continue to have a problem, contact your manufacturer or dealer for service. If your insurance purchased they power chair for you, they may also cover the cost of repairs.
Good luck!

Sep 02, 2010 | RTO Permobil Chairman Entra - Used...

1 Answer

Keeps blinking. I've shut it off, and cancelled all print jobs - even unplugged it. Keeps blinking. Says there is an operator error


Try this:

1. Turn off printer (use button, don't unplug)
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not, press the Power button once more.

If this not help may the print head is defective.

Oct 07, 2009 | Canon BubbleJet i560 InkJet Printer

1 Answer

Power going off


Have your gel cells checked. It may be time for replacement.

Sep 30, 2009 | NRS Hoveround MPV 5 - Used Power...

1 Answer

The charge lights blink and the chair won,t go.


Just had this problem with my Guardian Aspire. They had to replace the electronic box with the joy stick. BIG BUCKS!

Mar 12, 2009 | Jet Health & Beauty

Not finding what you are looking for?
Electric Strider Midi 4 Wheel Mobility Scooter - Midnight Blue Logo

444 people viewed this question

Ask a Question

Usually answered in minutes!

Top Electric Health & Beauty Experts

Rob Hill
Rob Hill

Level 3 Expert

1358 Answers

Colin Taylor

Level 2 Expert

347 Answers

syaiful ridlo
syaiful ridlo

Level 2 Expert

112 Answers

Are you an Electric Health and Beauty Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...