Question about HP Pavilion a1600n (882780776265) PC Desktop

1 Answer

Takes 15 mins to boot after loading Micro trend

Installed Micro trend on the HP Pavilion a1600n, after it connected to the internet to download updates, it boots to the blue screen with the options of

boot(esc)
F1 setup
F10 recovery

I was able to get it to go into the boot menu and I selected CD for first boot option, then after this I discovered if you waited, it would finally boot.
Today I cut it on, I selected F1, then left it for awhile to see if it would go into the bios, but now it won't boot at all, I get a black screen. I have booted it numerous times, even tried to boot from a bootable CD.

All this happened after loading Micro Trend PC Chillin version 2007

Posted by on

  • iloveshihtzu Dec 15, 2008

    can't get it to to boot to any screen. recovery option does not respond, now I only get a black screen at boot up. I have not been able to boot into safe mode, no key strokes seem to respond. Before it would just sit at the screen with the options I listed and would not respond to F1 or F10. It did one time respond to esc, then I set it to boot from the CD first then the hard drive. Now I only get to the black screen, it's almost as if the hard drive is died.



    The CD rom drive flashes, the the hard drive flashes, but that it. Then no response from the drive and a black screen.



    By the way, this is not my computer, so I am really frustrated, it's my room mates, I added her to my wireless then added the Micro Trend, then now it doesn't work at all. Thanks for your suggestions. do you have anymore ideas?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 334 Answers

You have too much at startup. thats the programs the computer starts at boot up.i would go to last good configuration and see what happens if that works i would seriously get rid of some programs you don't need and defrag your computer.

Posted on Dec 15, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

With Trend Micro firewall on, I cannot access the Internet. This occurred very suddenly. What is happening?


I un-installed Trend Micro and re-installed it and then waited some time for it to update. I enabled the Trend Micro firewall and was able to connect to the Internet

Nov 21, 2009 | Trend Micro Computers & Internet

1 Answer

Will not connect to the internet


Remove remnants of the old version: http://esupport.trendmicro.com/Pages/How-do-I-remove-old-or-new-versions-of-Trend-Micro-products-in-my-comp.aspx
After removing the remnants install the latest version of your program: http://esupport.trendmicro.com/Pages/How-to-download-and-install-Trend-Micro-Internet-Security-Pro-2010.aspx

Oct 01, 2009 | Trend Micro Internet Security Pro 2008...

1 Answer

Trend Micro Interent Secuirty PRO v.2 is guarding me too much


Your computer has a virus and has disabled Trend Micro from working correctly. This virus you have is very hard to remove manually. I run this program on all of my customers computers to rid of the virus. It cost $30.00 but will save you hundreds in computer repair.

http://www.enigmasoftware.com/

This is the only spyware remover that will rid what you have. You can download the free trial but it will only let you see if you have the virus/spyware and will not let you remove until you pay. It's worth it, takes 5 minutes to rid computer of viruses!

Your Trend Micro will work properly after you get rid of virus.

The other program that wants you to purchase is a fake....do not enetr your info in the page.

May 09, 2009 | Trend Micro Internet Security 2008(Pc)...

1 Answer

My HP 9311 Tx does not give display on its LCD screen


after loading Operating system just press F5 and wait for 2-3 seconds. if display not appear try 1-2 times. it will come. plz replt if ur problem solved

Apr 10, 2009 | HP Pavilion dv9000z Notebook

3 Answers

Internet security


1. make sure that the previous installation is inactive
2. since this is a new computer, upgrade to the Trend Micro Internet Security 2009 version. use the same serial number and remember to create a NEW account when prompted.

here's the link:
http://esupport.trendmicro.com/Pages/Where-can-I-download-the-installer-file-for-my-Trend-Micro-Consumer-pr.aspx


Jul 27, 2008 | Trend Micro PC-cillin Internet Security...

1 Answer

Slow internet connection


i guess you need to install the LAN or WiFi driver again from your motherboard CD......

Jul 01, 2008 | Microsoft Office Outlook 2003 for PC

2 Answers

Trend micro internet security 2008


Dear Sir/Madam,

This error will appear if you have installed the 16.05 version of
Trend Micro Internet Security Pro, Trend Micro Internet Security and
Trend Micro AntiVirus plus AntiSpyware 2008 on a computer running
Windows Vista with Service Pack 1 or Window XP with Service Pack 3.


The Trend Micro Personal Firewall and the Unauthorized Changes
Prevention features main components do not work with the new service
packs from Microsoft.


A working version of Trend Micro Internet Security Pro, Trend Micro
Internet Security and Trend Micro AntiVirus plus AntiSpyware 2008 with
Windows Vista SP1 and Windows XP SP3 would be released sometime in
February 2008.


The release would be timed before Microsoft uploads the new service
packs in their automatic update servers for Windows.


To prevent this message from appearing, follow the steps indicated
below:


a.Check the program version of the Trend Micro program installed on
your computer.


b.If you are using version 16.05 and you want to continue using this
latest version of the Trend Micro program, you must uninstall the non-
working service pack from Microsoft.


c. If you do not want to remove the new Microsoft service packs, Trend
Micro suggests that you uninstall the Trend Micro program installed in
your computer and install PC-cillin Internet Security 2007 until the
release of the working version.

Thanks
Good Luck




“Don’t Forget to rate the Solution”


Jun 06, 2008 | Trend Micro PC-cillin Internet Security...

2 Answers

HP vista desktop. keep getting permission "pop-ups" from adobe and google tool bar.


are you using internet explorer???
DONT. Use Mozilla Firefox instead. Its safer , faster.

Apr 18, 2008 | HP PAVILION A6230N DESKTOP PC

Not finding what you are looking for?
HP Pavilion a1600n (882780776265) PC Desktop Logo

Related Topics:

129 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

Tony

Level 3 Expert

2598 Answers

Are you a HP Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...