Question about Uniden Cordless Phone

1 Answer

Model 28821 serie dect 6.0 phone reads outy of range. can ot use

When this happens. did not get english manual so i can't look up trouble diagnose. what is the problem. phone is about a month old.

Posted by on

  • 1 more comment 
  • jkeatts Dec 15, 2008

    THE PHONE IS WORKING FINE NOW. LEFT IT IN CHARGER OVER NIGHT AND IS WORKING FINE. COULD IT BE A WEAK BATTERY?

  • ronc1247 Dec 20, 2008

    I purchased the same GE Cell Fusion model 28821 series and 4 handsets and have the same problem. The additional handsets I purchased will not register with the base and handsets will not charge. I have run through the troubleshooting in the manuel, talked to customer service and have returned the phones for replacement, but the result is the same after the third set of phones. Thomson does not offer a refund for the product, but will replace the phones until the warrant runs out. I have a phone system that is totally useless. This product does not work as advertised or expected.

  • jkeatts Dec 23, 2008

    I DID NOT GET ANY HELP FORM FIXYA. I JUST TRIED THIS MY SELF HAS WORKED SO FAR. IF IT HAPPENS AGAIN I WILL JUST GET ANOTHER BRAND.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I UNPLUGED THE BATTERY AND STARTED PUNCHING SOME BUTTONS AND THEN LEFT IT IN THE CHARGER OVER NIGHT. THE NEXT MORNING THE PHONE WAS OK. MAKES ME THINK THAT THE PHONE LOST ITS CHARGE SOME HOW. RIGHT NOW THE PHONE IS WORKING JUST FINE.

Posted on Dec 16, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I need a manual for a DECT 3080-3


Do you mean the Uniden DECT3080-3? Uniden has the manuals for most of their phones on their support site or the product page. Manuals for the DECT phones start here: http://www.uniden.com/bin/venda?ex=co_disp-view&bsref=uniden&scat=dectphones_mnl . The phones are listed in numerical and alphabetical order. Ignore the number after the dash in the phone name, that only indicates the number of handsets in the bundle when sold. One manual covers all bundles of the same model. The DECT3080 manual in English is available here: http://www.uniden.com/content/ebiz/uniden/resources/ownersmanuals/DECT3080-2om.pdf .

I hope this helps.

Cindy Wells

Sep 28, 2011 | Phones

1 Answer

I have a GE DECT 6.0 cordless phone model 28821 series. the lights that blink when a message is on the phone will not stop blinking. and the phone says there is a new message on the screen.


You have unheard messages on the voicemail system provided by your telephone company. This system records messages when someone calls while you're already on the phone. Please contact your telephone company for instructions on accessing their voicemail system.

Jan 10, 2011 | Uniden DECT 6.0 Cordless Telephone...

1 Answer

I have no english manual for the GE series 28821


http://www.home-electronics.net/ge/pc/IB/28821FE3_IB.pdf

Apr 13, 2010 | Uniden Cordless Phone

1 Answer

Model 28821 Series DECT 6.0, stuck in search mode


Removed battery for a few minutes and it reset.

Oct 02, 2009 | GE 28111EE2 Cordless Phone

1 Answer

Cannot program, menu stuck on Spanish, cannot access main menu from mute/ok button


I know this should be a MUCH more techie answer, but have you tried just asking a nearby Mexican to help you? Just a thought.....

You say you cannot get to the menu from the mute/ok button?

What happens instead?
FROM DA BOOOK looks pretty clear to me.

Handset Setup
1. Make sure your phone is OFF (not in TALK mode).
2. Press the mute/menu OK button to go to the main menu.
3. Press CALLER ID-VOLUME ( 6 or 5) button to scroll to HANDSET SETUP.
4. Press mute/menu OK button to confirm and you may program the following items: Language, Handset Name, Ringer Tone, Ringer Volume, VIP Melody, Key Tone, Set Day/Time, Equalizer, Area Code, Tone/Pulse, Registration, Deregistration and Default Setting.
NOTE: During programming, you may press the END/cancel button at any time to exit the sub-menu and return to the menu.
Language
From the Handset Setup Menu:
1. Press the CALLER ID-VOLUME ( 6 or 5) button to scroll to the SET LANGUAGE sub-menu.
2. Press mute/menu OK button to enter the menu. SET LANGUAGE 1ENG 2FRA 3ESP shows in the display.
3. Use the touch tone pad on the handset to select 1ENG, 2FRA, 3ESP, or use the CALLER ID-VOLUME ( 6 or 5) button to scroll to the desired language. English is the default setting.
4. Press the mute/menu OK button to save your selection. You will hear a confirmation tone and the selected language shows in the display.

Apr 29, 2009 | Uniden Cordless Phone

1 Answer

New GE Model 28821 Answering System HANGS UP after greeting announcement! HELP?! ;P


JUNK IT AND GET A PANASONIC.. THATS WHAT I DID. THIS GE PHONE IS THE WORST.

Jul 24, 2008 | Uniden Cordless Phone

1 Answer

Model 28821 series DECT 6.0 Ser # 80221406


You are welcome! I am glad you resolved your issue!

Jun 26, 2008 | Uniden Cordless Phone

7 Answers

Displays new voice mail and VMWI constantly blinking when no voice mail


Subscriber is T-Mobile@Home. First, cleared all messages from T-Mobile voicemail.

Now to fix your GE phone:


Push the program key. Select Handset Setup Push the program key Select Default Settings Push the program key Select 1 Yes. Push the program key
Hope this helps.

Mar 06, 2008 | Uniden Cordless Phone

Not finding what you are looking for?
Uniden Cordless Phone Logo

Related Topics:

160 people viewed this question

Ask a Question

Usually answered in minutes!

Top Uniden Phones Experts

kakima

Level 3 Expert

96333 Answers

Dave Ellis

Level 2 Expert

84 Answers

k24674

Level 3 Expert

7987 Answers

Are you an Uniden Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...