Help blue screen only when you turn tv on I tried to turn off and on unplug and plug in thought someone might have hit wrong button checked menu don't know how to reset also when i try to set a/v it is on off and either using the remote or from the tv cant get it to go to basic or auto what do you think ( other than go buy a new one)

Try unplugging it, for a while.

I HAVE FOUND THE ANSWER!!!! I just bought an TCL TV last night and was given the wrong remote. Screen was stuck on "no media" screen BUT I noticed that when I turn the tv on and keep pressing the menu button, the menu screen would pop up for a half second before the no media screen popped up again. So I knew it was able to access it. SO, it took a few try's and with no exact method I turned the tv on, waited til I saw the TCL logo and then simultaneously pressed the menu and channel up button repeatedly. It will open the menu for you and allow you to move between the input channels!!!! It WILL take a few tries to catch it but it worked!!! Your welcome!!!!

That blue K means you are in the service mode. Unplug your set and wait 30 seconds. Then at the same time you plug it back in, you need to be holding the volume down button and the input button.
The TV should turn back and the blue K should turn pink. Once this happens, press the volume and channel down button at the same time. A menu should come on the screen. With your remote, press the up arrow to reach the nest page. The first option should say INIT. Arrow to the right and hit enter. In a few seconds your screen should turn green and say success. Unplug the TV and wait 30 seconds. Plug the set back in and turn on your TV. You can then set your set back the way you want.

I think you accidentally turned on some kinda of test pattern. Try pressing the Input button on the TV itself or the menu button. Sorry that is the best I can do.

Unplug the tv from power for 10 minutes to reset.

i would suggest cycling thru the inputs- av1 av2 rgb hdmi. blue screen is indicator of no input.

did you ever fix the problem?
my tv went blue screen also
needed to charge the lamp so did but now can't get the new lamp to work

Try this one:


1. Unplug your power cord from the box (NOT THE
WALL!)
2. Wait 3-5 min... No more than 5 MIN (very important)
3. Hold down the power and select button at the same time and don’t let go.
4. Have someone plug the power back in… and keep holding the power and select button.
5. Don’t let go until it gets to 0 (it's about 5 min)
6. Once it gets to 0 then it will stop counting down, that when you let go!!
7. Don’t touch anything,
8. The screen will reset and it will go blank. nad that's it

Hope that helps....

try to go to the menu,then find the words,blue on or off,turn it off,then you will see the changers.

I've tried many different things to isolate the problem, the only solution is to manually reset it to factory settings via menu button. If something goes wrong, like the menu button freezes turn off the monitor *Or unplug it, and retry to reset factory settings. Unfortunately you have to do this almost every single time you turn off/on the television.