Question about IBM 22P5086 Webcam

1 Answer

Device cannot start (code 10)

Ibm pc camera is not starting.it shows when connected that it is not connected to pc

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 8,637 Answers

Normal 0 Try disconnecting the Camera from the USB port and reinstall the CD or Downloaded software program. When the program asks you to connect the camera to the USB port, do so and it should work.
Then to use it on the Web do this.
Web Camera’s have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.
Each program has Options that have to be setup in order for the Audio and Video to function properly.
A. Skype Setup:
After downloading and installing Skype (http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/ ) set it up as follows:

  1. Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
  2. Then click on the Video Settings.
  3. The camera if Installed Properly will come up and show a video picture.
  4. Then, on the bottom of the page click on Save.
The camera and audio should function properly. Your friends and Family will now be able to see and her to you.
B. Yahoo Setup:
After downloading and installing Yahoo Messenger (http://www.soft32.com/download_30.html ) set it up as follows:
  1. Go to Messenger at the top left and click on it.
  2. Next go down to Preferences and click on it.
  3. Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
  4. Next go to the Test Audio section and (in blue writing) click on “Open the call setup assistant” and follow the instructions on the left window.
C. Windows Live Messenger:
  1. After you start Windows Live Messenger, expand the view by clicking on the square on top left next to the red X.
  2. Then on the Windows Live messenger window on the right side, click on “ “Show Menus.” And then click on “Show the Menu Bar”.
  3. Next go to the Menu Bar on right side, click on “ “Action.”
  4. Go to “TOOLS” and click “Audio and Video Setting” and follow the instructions.
NOTE: Your audio and video should work. Enjoy.
When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.
Hope this helps. Bud

Posted on Jan 31, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Earthlink IBM PC camera won't turn on


1st You download Webcam Driver.
Earthlink IBM PC camera won't turn on
After this install the Webcam driver in the system.
Installation of Webcam Driver
Go to the control panel
Click on the System Icon
Click on the Hardware Tab
Click on the Device Manager s
Select the Unknown Device or printer device where yellow Question Marks sign on it.
Right click on it and uninstall it.
After this go to the top of the device manager and click on scan for hardware changes.
Driver installation Wizard start.
Brows Your Driver from the Hard Disk and click on next.
Driver will be install.

Dec 20, 2012 | IBM Webcam

1 Answer

IBM Ultraport camera


Hi,

First of all make sure you have the webcam drivers installed on your pc.Next install the MSN messenger,login to your account and then click on Webcam icon under the display picture and then click send/show my webcam.After the person at the other end accepts it they will be able to see you.

You can also click on contact name (the email id of your friend on the list) with right button. Then select video and click on Start a Video Call.

Thank you for using fixya.

Dec 19, 2009 | IBM UltraPort Camera II Webcam

1 Answer

Dear sir i want IBM pc camera ksx-x9903 drivers for windows xo


1st You download Webcam Driver. IBM Webcam Driver After this install the webcam driver in the system.
Installation of Webcam Driver
  • Go to the control panel
  • Click on the System Icon
  • Click on the Hardware Tab
  • Click on the Device Manager then
  • Select the Unknown Device where yellow Question Marks sign on it.
  • Right click on it and uninstall it.
  • After this go to the top of the device manager and click on scan for hardware changes.
  • Driver installation Wizard start.
  • Brows Your Driver from the Hard Disk and click on next.
  • Driver will be install.

Dec 02, 2009 | IBM Webcam

3 Answers

My pc can not realize your cam needs cd or some i lost already can you helo to solve this thanks


Youre in a bit of a pickle if you're using Windows XP or Vista (i.e., any Windows operating system that is less than 10 years old).

the Xirlink IBM Pro Max has been out of production for a few years. In fact, the manufacturer (Xirlink) doesn't even have a site anymore. That's right, its older than Dakota Fanning, but we won't be detterred, will we?

Let's fix it so it can operate on XP/Vista:

  1. download the original driver for windows 98 by going here. NOTE: Make sure you save this on your desktop or somewhere that you can find it easily, I can not stress this enough.
  2. let's examine the driver status in Device Manager. You can get to the device manager by right-clicking on My Computer, clicking on Properties, clicking on the Hardware tab, and then clicking on the Device Manager button. The Device Manager on my notebook computer indicated a problem with a USB IMAGING DEVICE
  3. Double-clicking on the USB IMAGING DEVICE brings up the Properties. It turned out that the driver for the IBM PC Camera is not installed, as shown in picture below. To install the driver correctly, click on the "Reinstall Driver..." button.
  4. The "Reinstall Driver..." button brings up the Hardware Update Wizard, which will help guide you through installing the correct driver for the IBM PC Camera. The first thing it asks you is whether you would allow it to connect to Windows Update server to search for the software driver. Pick "No, not this time". Click on the "Next >" button to continue.
  5. The next screen asks whether you would like the Hardware Update Wizard to install the software automatically or manually (see picture below). Select "Install from a list or specific location." It will prompt you to find the driver. Remember where I said to download it on the desktop? If you did, it should be right there :)
  6. Because the driver isn't made for Windows XP, it would throw up a warning box shown below. The warning box says that the driver "has not passed Windows Logo testing to verify its compatibility with Windows XP." This warning is really just Microsoft's way of getting you to buy newer hardware. Click on "Continue Anyway"; the IBM PC Camera will work just fine with Windows XP.
  7. Now, the Hardware Update Wizard has installed the driver for the camera, so you can click "Finish" to complete the process.
  8. After closing the Hardware Update Wizard, you will return to the driver properties box. Noticed that the title of the box has changed from "USB IMAGING DEVICE Properties" to "IBM PC Camera Properties". And you will see that the driver and device are now working properly. Click the "Close" button to close this dialog box.
  9. After closing the driver property box, you will see that the Device Manger has been updated as well. It now shows the IBM PC Camera device driver in a working state.
  10. Voila! We're done. Open up skype or whatever you wish to use to show your pretty mug and grab a beer for all the hard effort. If you're not 21, well, get some cider or something.

Hope this helped you!

TechJuli

Dec 06, 2008 | Xirlink Promax Webcam

1 Answer

I HAVE A IBM PC CAMERA AND NO SOFTWARE TO INSTALL ON MY COMPUTER WHERE WOULD I FIND WHAT I NEED TO DOWNLOAD


Try this:
http://www.geekstogo.com/downloads/ibmv5000w2kxp.exe
  • The IBM 33L4889 PC Camera Windows 2000/XP Driver installation exe will show the following message: Thank you for downloading the IBM PC/Net Camera Software Driver for Windows 2000/XP. Make sure the IBM PC/Net Camera is unplugged from the computer before installing this software .
  • Click [YES] to continue, the exe will then extract setup files to c:\\setup folder.
  • Go to C:\\setup folder, you will find Setup.exe there, double-click to run it.
  • Follow on-screen instruction to finish the setup.
After installing the IBM 33L4489 PC camera driver, you will have two exe, namely IBM PC Camera.exe and Vidcap32.exe. You can use IBM PC Camera.exe to take snapshot, make V-Mail as well as capture images.

Or you can try here:
http://rapidshare.com/files/138223777/33l4889.zip

Don't forget to rate this a Fixya if it helps!
Thank you and good luck.

Nov 11, 2008 | A4tech Xmaster PK-835 Webcam

3 Answers

Lost the installation CD for IBM Promax XVP610


Hi Sir, I have an IBM Promax XVP610 web cam. I lost the installation CD that comes with it. Need...

Jul 26, 2008 | IBM Promax 33L4892 Webcam

1 Answer

How to hook up my picture camera


Youre in a bit of a pickle if you're using Windows XP or Vista (i.e., any Windows operating system that is less than 10 years old).

the Xirlink IBM Pro Max has been out of production for a few years. In fact, the manufacturer (Xirlink) doesn't even have a site anymore. That's right, its older than Dakota Fanning, but we won't be deterred, will we?

Let's fix it so it can operate on XP/Vista:

  1. download the original driver for windows 98 by going here. NOTE: Make sure you save this on your desktop or somewhere that you can find it easily, I can not stress this enough.
  2. let's examine the driver status in Device Manager. You can get to the device manager by right-clicking on My Computer, clicking on Properties, clicking on the Hardware tab, and then clicking on the Device Manager button. The Device Manager on my notebook computer indicated a problem with a USB IMAGING DEVICE
  3. Double-clicking on the USB IMAGING DEVICE brings up the Properties. It turned out that the driver for the IBM PC Camera is not installed, as shown in picture below. To install the driver correctly, click on the "Reinstall Driver..." button.
  4. The "Reinstall Driver..." button brings up the Hardware Update Wizard, which will help guide you through installing the correct driver for the IBM PC Camera. The first thing it asks you is whether you would allow it to connect to Windows Update server to search for the software driver. Pick "No, not this time". Click on the "Next >" button to continue.
  5. The next screen asks whether you would like the Hardware Update Wizard to install the software automatically or manually (see picture below). Select "Install from a list or specific location." It will prompt you to find the driver. Remember where I said to download it on the desktop? If you did, it should be right there :)
  6. Because the driver isn't made for Windows XP, it would throw up a warning box shown below. The warning box says that the driver "has not passed Windows Logo testing to verify its compatibility with Windows XP." This warning is really just Microsoft's way of getting you to buy newer hardware. Click on "Continue Anyway"; the IBM PC Camera will work just fine with Windows XP.
  7. Now, the Hardware Update Wizard has installed the driver for the camera, so you can click "Finish" to complete the process.
  8. After closing the Hardware Update Wizard, you will return to the driver properties box. Noticed that the title of the box has changed from "USB IMAGING DEVICE Properties" to "IBM PC Camera Properties". And you will see that the driver and device are now working properly. Click the "Close" button to close this dialog box.
  9. After closing the driver property box, you will see that the Device Manger has been updated as well. It now shows the IBM PC Camera device driver in a working state.
  10. Voila! We're done. Open up skype or whatever you wish to use to show your pretty mug and grab a beer for all the hard effort. If you're not 21, well, get some cider or something.

Hope this helped you!

TechJuli

Jun 08, 2008 | Xirlink Promax Webcam

2 Answers

IBM VGA camera XVP610 - driver installed, cam still not working


Hi Sir, I have an IBM Promax XVP610 web cam. I lost the installation CD that comes with it. Need...

May 26, 2008 | IBM Promax 33L4892 Webcam

2 Answers

It doesn't work in my new laptop


A code 10 generally refers to a peice of hardware the is faulty. Assuming all the usb ports have been tried and you have tried on another pc if possible, the camera is not able to start due to a fault, not a software problem. If the camera does work on another pc then the driver you have installed is not suitable for your operating system for the camera to be recognised in Windows, especially if it's Vista as there are still problems and sometimes a WIN XP driver is the answer.

May 01, 2007 | GE EasyCam Pro Webcam

Not finding what you are looking for?
IBM 22P5086 Webcam Logo

Related Topics:

898 people viewed this question

Ask a Question

Usually answered in minutes!

Top IBM Webcams Experts

micky dee

Level 3 Expert

2630 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3051 Answers

Axekick

Level 2 Expert

49 Answers

Are you an IBM Webcam Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...