Question about Intel D865GBF Motherboard

1 Answer

Power conection do i conect my 4 pin atx plug and my 24 pin plug to my mother-board

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 104 Answers

Yes

Posted on Dec 15, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fan is working without 4 pin ATX pin but not with 4 pin ATx


Fans are Controlled by Temperature Control Setting of the Mother board. So the Fan controller is a function of the BIOS of the Mother Board...

Jul 17, 2014 | Intel Motherboards

1 Answer

How do I re-conect the power on and off switch to the motherboard?


They should be labeled. The Power switch plug should say pwr. The Hard Drive Led should say hdd, etc. Look on the motherboard for the inscribed label.

May 23, 2012 | Motherboards

1 Answer

I have a problem with my cpu ,its conected but the fan is not turning i conected the power ,to the mother board i got power to the dvd rw dvd player the hard drive plusthe extracter fan ,but my cpu fan...


please check the SMPS if youn have another new change it .or if you dont have smps another so open the smps and short the black +green wire and test the voltage bassically the four way connecting cable .disclosed the 24/20 pin socket.shibuda_4.jpgnow it same as before
please check the cpu fan and the connecttion is well connected.purchase and fit ..
hope it help you .please dont forgate to me.

Nov 28, 2010 | EliteGroup 661FX-M7 (661FXM7V11)...

2 Answers

I've got a new Gigabyte Ga-M68Mt-D3 mobo paired with a cooler master 460 watt power supple. Cpu is Amd phenom II 3.2 ghz with 4 gig of DDR3 ram. I powered up the supply attached to my ATX power supply...


Most motherboards now have a 24-pin power supply connector. If you haven't already found a diagram showing the pinouts of the 20- and 24-pin power plugs, here's one borrowed from a handy site:

pgh_pa_guy_1.jpg

The two plugs are essentially the same, but the 24-pin version duplicates some voltages on the extra pins. The extra pins in the larger connector were meant to provide extra current paths for voltages that see heavy loads from newer processors and motherboard circuitry. Depending on how a motherboard is designed, it might work with a 20-pin plug connected (leaving pins 11, 12, 23 and 24 empty). But typically if the board has a 24-pin connector it needs the 24-pin power supply plug.

Most power supplies have a 20-pin plug with a separate 4-pin section that fastens to it for connection to a 24-pin mobo connector. It typically has one side designed to slide onto the end of the 20-pin plug, essentially turning it into the 24-pin version. This added plug does not have a retaining clamp on its side, so you can tell it from the the 4-pin CPU power plug. The wire colors are also different. For reference, here is the processor power plug, from the same website:

pgh_pa_guy_2.jpg
New motherboard specs call for the separate processor power connector for the same reason the extra pins were added to the power supply connector: to handle the high currents needed by increasingly faster CPUs.

When the motherboard has these connectors, you need to use them all to get everything working. Hope this helps. Thanks to smspowersupply.com for the diagrams, and thank you for using Fixya.

moz-screenshot-1.png

Nov 19, 2010 | Motherboards

1 Answer

How to power connect to the mother board?


firs connect the pwrswitch markd pwr se fron the cabin to the motherboard frontpannel the the sme with reset then powerled and ideled now you can see a 24 pin or 20oin conector connectit to the motherboard if you have the extra at pin of four pin conect it to the motherboard then presst the power switch

Oct 29, 2010 | MSI Core 2 Duo, Pentium D, Pentium 4...

2 Answers

System won't turn on but when i pushg down on one side of the power suply connectore the fan starts running but computer stioll won't turn on it used to boot up then opne day stopped


It sounds like you have a faulty connector - I would return the item under warranty. Otherwise, if it is out of warranty, you will have to source a new motherboard.

Nov 23, 2009 | ASUS COMPUTER INTL P5SD2-VM MBD MATX LGA...

1 Answer

Power supply


yes you will only use 20 of those 24 pins on this motherboard.

Dec 15, 2008 | Intel D865GBF Motherboard

1 Answer

Motherboard


do u have pw switch on right pins power p start with red on that oen go over one to conect the black try both ways never up down on pins tho side to side only ok

Jan 25, 2008 | Intel Desktop Board D845WN Motherboard

Not finding what you are looking for?
Intel D865GBF Motherboard Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Intel Motherboards Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Tony

Level 3 Expert

2598 Answers

Sudeep Chatterjee
Sudeep Chatterjee

Level 3 Expert

3267 Answers

Are you an Intel Motherboard Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...