Question about HP iPAQ H3950 Pocket PC

1 Answer

Screen align problem

I have just changed the battery on my compaq ipaq. It was working fine prior to the change, but following the change I cannot get the pda to "open". When I changed the battery I synchronised it, but when I switched it on I got the "Tap screen to align message" and when I tap the screen it goes through the align process but won't come out when its completed the align. I have tried taking the battery out and starting again but still get the same problem. I have also tried soft and hard resets and that doesn't cure it either. The strange thing is the PDA has sychronised because I get "reminders" of calender events "over" the alignment message so the information / software seems to be OK i just cannot open it. Can anyone help.

Posted by on

  • sfmk mdfahfja
    sfmk mdfahfja Dec 15, 2008

    I have the same problem

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 166 Answers

Try to do hard reset if its not works
try to update rom image
if still not works try to replace your touch screen to new one

Posted on Jan 06, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Align screen on IPAQ


Tap the target firmly and accurately at each location on the screen.The target will continue to move until the screen is aligned,
pls help.what can i do.

Jul 23, 2009 | Compaq iPAQ H3955 Pocket PC

2 Answers

Screen allignment hp ipaq hx2410 pocket pc


Try Realigning the Touch Screen
1. Tap Start > Settings > System tab > Screen.
2. Tap Align Screen and follow the instructions.

Mar 18, 2009 | HP iPAQ hx2410 Pocket PC

1 Answer

Ipaq rx-3115 stops at align screen after reset


This happened to me and i got so mad that i broke the screen. But that was a good idea because then i got a new screen and now it works fine. Just get another screen and it should work fine. or you can just get the digitizer part and swap out your LCD parts.

Feb 17, 2009 | HP iPAQ RX3115 Pocket PC

1 Answer

I can't make my IPAQ pass the align screen


Replaced LCD touch screen in Australia.  Cost $95.00 AUS Thanks for Fixya help you where really great.

Feb 12, 2009 | Compaq iPAQ H3955 Pocket PC

2 Answers

Compaq iPAQ H3800 Pocket PC


I had the same problem with my iPAQ H3800. I bought a replacement battery on eBay for £7.49 and now it's fine.

Dec 11, 2008 | Compaq iPAQ H3850 Pocket PC

1 Answer

Stuck on "align screen"


your touch screen gone just change your touch screen it goes back to normal

Mar 20, 2008 | HP iPAQ H6300 Pocket PC

2 Answers

I can't make my IPAQ pass the align screen


Use Active Sync, explorer the folder contents on the device, move to the windows folder, delete the file welcome.exe. Soft reset and should work.

Sometimes you have to end all Active Sync tasks, rapimgr.exe, wescomm.exe and WCESmgr.exe. After you close all these, reopen Active Sync, should then be abel to connect your device and try again.

-m0gliE

Dec 19, 2007 | Compaq iPAQ H3850 Pocket PC

3 Answers

Ipaq RX 3115 Stops at align Screen


solia, I'm sorry, I didn't mean to close the chat session on you.
Is your unit still under warranty? If so, check with the manufacturer.
They can help.

Mike

Sep 27, 2006 | HP iPAQ RX3115 Pocket PC

1 Answer

Hard reset does not wok in my ipaq H3955


The touchscreen may be broken, try hardreset again if it doesn't help contact your dealer or HP for possible repairs.

Sep 14, 2006 | Compaq iPAQ H3955 Pocket PC

Not finding what you are looking for?
HP iPAQ H3950 Pocket PC Logo

136 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

Tony

Level 3 Expert

2598 Answers

Are you a HP Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...