Question about Televison & Video

Open Question

No remote no for elonex tv's

I have luxor pvr does anybody have the remote number for a elonex tv

Posted by on

  • alleypyn Dec 28, 2008

    Need a five-digit tv code for elonex lnxty-32f2 using urc one-for-all urc. Cheers.

×

1 Suggested Answer

  • 1 Answer

SOURCE: Need code for Thomson DTI61300 remote for Elonex TV

Use 0538

Posted on Mar 06, 2009


Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can I buy another remote for my Luxor 32in TV


You'll need the remote's model number and brand name. Make a remote 'replacement search' using that number. Most numbers are in the battery compartment.

Dec 02, 2014 | RCA Televison & Video

1 Answer

We bought a sony svr1000 nd we got the display one minus the remote we bought a tuneable remote will they work on this nd can we by a remote from sony


Buying a remote from Sony will be very expensive - about $90. But you could have bought a generic brand PVR remote on Amazon for about $30. It is hard to know if the tuneable remote that you purchased will support this Sony PVR that you have. If you provide the brand and model number of the remote then I could check and find out if it supports the PVR.
The model number of the Sony remote is rmt-d259.

The generic one from amazon is available at this site.
Replacement Remote Control for Sony RMT D259 batteries included

Aug 23, 2014 | Televison & Video

1 Answer

Elonex tv remote code


0382, 0328,0326. Try these codes. If you wish to get more; check the site linked here. It has set-up code list & set-up procedure to many popular brand remote controls. See it in "Mosaic" view. It will make surf easier.
http://electrohelponline.blogspot.com/
Try this link too.
http://electro-medical.blogspot.com/

Mar 10, 2014 | Philips Televison & Video

1 Answer

Dstv remote not working on any blue dials? Two tv's in separate rooms, one pvr decoder. Only the red dial works on both tv's & both remotes are working & both tvs responding properly.


Is this a newly installed system? If both tv's are responding to the same remote setting (red in case), it means both tv's are set to the same channel. The tv that is connected to the decoder directly (via AV cables, I presume) is supposed to respond to if the remote is set to red. In order for the second tv to respond when the remote is set to blue, you need to tune the second tv until you find the picture of tv2 (the decoder transmits both tv1 and tv2 on the RF/coaxial output and it seems that your remote tv is tuned to tv1 instead of tv2).

Apr 02, 2013 | Televison & Video

1 Answer

Technika 46-270 tv need luxor tutv2500 universal remote codes


Codes for Technica TV are: 0031 0004 0005 0009 0051 0053 0105 0109 0170 0000 0174 0001 0008 0012 0042 0058

Oct 01, 2012 | Televison & Video

4 Answers

Codes for oneforall


It is my pleasure to guide you.

Look through these. I hope what you need is here.

Manufacturer's Codes
Setup Codes For Cable Boxes
Setup Codes For Cable Box/PVR (or DVR) Combos
Setup Codes For DVD Players
Setup Codes For DVD Player/VCR Combos
Setup Codes For PVRs (or DVRs)
Setup Codes For Satellite Receivers
Setup Codes For Satellite Receiver/PVR (or DVR) Combos
Setup Codes For TVs
Setup Codes For TV/DVD Player Combos
Setup Codes For TV/VCR Combos
Setup Codes For TV/VCR/DVD Player Combos
Setup Codes For VCRs

Please post back which one is yours with Serial number and Mfg.

Setup Codes for DVD Players such as Magnavox 0503, 0539, 0646, 0675, 0821,1268

Jun 05, 2011 | One For All URC4220 Remote Control

2 Answers

Need code for magnavox tv urc-4021boo


Hi, the codes you have requested;

Magnavox - 0054, 0706, 0030, 1454, 1254

Instructions to program code:

1. Turn on a desired device (e.g.,VCR or DVD player) and, if applicable, insert media (e.g., cassette or disc). NOTE: Please read steps 2 through 4 completely before proceeding. Highlight or write down the codes and device you wish to program before starting step 2.

2. On the remote control,press a device key once (i.e., VCR/PVR, DVD, CBL/SAT,or TV).
NOTE: To program control of a VCR, PVR (or DVR),TV/VCR Combo, or TV/VCR/DVD Player Combo press VCR/PVR once.After programming a VCR Combo device, you will be able to control channel selection, volume, and VCR functions. NOTE: To program control of a DVD Player,DVD Player/VCR Combo, or TV/DVD Player Combo, press DVD once.After programming a DVD Combo device, you will be able to control channel selection, volume, and DVD functions. NOTE: To program control of a Cable Box, Cable Box/PVR (or DVR) Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR) Combo, press CBL/SAT once.

3. Press and hold SET until the LED (red light) blinks twice,then release SET.

4. Use the Manufacturer's Codes (starting on page 18) to locate the type of device and brand name and then enter the first four-digit code for your device. If performed correctly,
the LED will blink twice. NOTE: If the LED did not blink twice, repeat steps 2 through 4 and enter
the same code again.

5. Aim the remote control at the device and press POWER once.The device should turn off. If it does not, repeat steps 2 through 5, trying each code for your brand until you find one that works.

Feb 12, 2011 | One For All URC-4021 Remote Control

1 Answer

After programming my NEW Harmony One Logitech remote I can't get it to change channels on the Dish HDTV DVR along with a bunch of other problems.


To control a Dish Network PVR/Satellite, it needs to be set to respond to the default Remote Address (1).

To reset your Dish Network PVR/Satellite to the default Remote Address:

1. Press SYSTEM INFO on the receiver's front panel. The System Information screen displays on the nearby TV and shows the Remote Address.
2. Using the original Dish Network remote, press and hold SAT on your remote control for about three seconds, until all of the mode buttons light up, and then release SAT.
3. Using the NUMBER PAD, press the 1 button
4. Press POUND (#). If you entered the address correctly, SAT will flash three times.
5. Press RECORD. Make sure the Remote Address you see on the System Information screen is 1.
6. Press the SELECT button on the front panel to close the System Information screen.
7. Your Harmony remote should now control your Dish Network PVR/Satellite box

NOTE: Dish Network PVR/Satellite receivers sometimes have two tuners, allowing them to be used in more than one room on different TVs. Harmony remotes can only control a Dish Network receiver's main tuner while still in the same room with direct line of sight to the device.


What other issues are you having with the remote?

Dec 25, 2009 | Logitech Harmony One Advanced Universal...

3 Answers

Remote code for Sony Homethetre on LG Remote


LG 32 LX2R TV REMOTE CODE TO WORK A SONY VTX-D8 U

Dec 30, 2007 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69736 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6370 Answers

yadayada
yadayada

Level 3 Expert

63661 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...