Question about Eddie Bauer Glacier Vector Jogger

2 Answers

Lost the bar that connects the travel system. Need replacement!

I have the Eddie Bauer Vector Stroller in Blue Glacier, along with the matching car seat, purchased together at BabiesRUs in 2005 for my first child. Now i have a newborn again, and I have both the stroller and the car seat, but cannot find the metal bar attachment that the car seat locks onto. (We have moved three times in the past three years!!!) You can set the car seat on top without it, but it is not secure and you run the risk of spilling your infant seat out of the stroller. I'm hoping a replacement bar will be available from the manufacturer for little or no cost. I love my travel systema and would like to use it with my new little son as well. Thanks in advance for any help!!!

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had the same problem, I called Eddie Bauer today and they are shipping me the bar. It cost 6.48 and it should be here in a week. It's hard to get a hold of them though.

Posted on Feb 25, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 5,158 Answers

Congrats on the new baby... go to this website
http://www.eddiebauer.com/custserv/custserv.jsp?sectionId=296

and find the catagory that best suits the problem or just contact them by email or phone and explain the problem... they may be able to help you with the part or suggest where you can get it.

at the same time you can check to see if there has been any recalls on these items as anything to do with children and safety is extremely important (i agree with that).

Good luck

Robert

Posted on Dec 16, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to know the brand of the mattress I purchased on Amazon. I have the date of purchase and the order number


Go to Amazon. Sign In. Look at your Purchase History. Everything you have ever purchased is listed there.

Jan 09, 2017 | Baby Gear

2 Answers

Instructions on model 343 - 8909N crib from JCP. How do I turn it into a toddler bed?


Did it come with an extra sideboard that connects the end sides together after you take one side off? The mattress spring or board should be sufficient to hold the end sides together but some come with a toddler bed side rail.

Nov 29, 2016 | Baby Gear

2 Answers

Is it worth buying a travel cot?


think ahead

good to have the baby cared for away from your home

by parents or family
or needed in child care centre .

also on family holidays its a better thing to pack

Jun 27, 2016 | Graco Contour Storage Travel Cot

1 Answer

How do I remove the studs on the base of soft bodied pram to replace wooden base which got damp


If the attachments are press studs then drill out the centre of the studs to get them apart. replace using small bolts and nuts or use new studs again from hardware shop

Nov 10, 2014 | Baby Gear

1 Answer

Where can I buy or get a bulb list for a HD-6838 child ride on car?


I wish I could give you part numbers but I didn't have luck finding any either. However it did tell me on this site that it is 6V. That should limit the number of bulbs to narrow it down from. Couple of options. You can email the company (Zhejiang MINGYANG Motor&Accessories Co., Ltd.) from this page: http://www.made-in-china.com/sendInquiry/shrom_WMSQpLEVOmIX_WMSQpLEVOmIX.html

OR...what I would do, is remove the defective bulb and go to radio shack and have them match it up to a 6V bulb.

Nov 24, 2012 | Baby Gear

1 Answer

The fixture open the top of my mutsy urban rider seems to be wobbly is there anyway to tighten this? Or will I need a whole new handle? If so where do I get that and how much will it cost me?


Perform the following procedure

to reset the Drum Unit counter
after you replace the Drum : Menu-->5+2+0+4 --> 1 (yes) + enter

Oct 09, 2012 | Baby Gear

1 Answer

Need screws to put crib together


First, I would be very cautious. Several of these cribs were recalled. You can check the Consumer Products Safety Commission to see if your crib was involved.

http://search.cpsc.gov/query.html?col=pubweb&charset=iso-8859-1&qt=simplicity

Secondly, this company went out of business and I was unable to contact anyone about ordering parts or manuals.

If you have the manul, it will tell you how many and what size screws you need.

If you don't have that I would try measuring the distance the screws need to go this will tell you the lengh of the screws needed. Then measure the distance of the hole, this will tell you how large of a screw to buy 1/2" 1/4" etc.

You can take this to your local hardware store such as Ace, Home Depot, Lowe's and ask them to help you pick out the correct items.

Jan 01, 2009 | Baby Gear

1 Answer

How can i get replacement parts for a simplicity crib 8994w ..


This company went out of business and I was unable to contact anyone about ordering parts or manuals. Unfortunately the new company that bought them, isn't taking responsiblity for any Products from the original Manufacturer.

Note, the website phone number and email are non working.

However, I did get a number to a person at the Blackstreet Captial Partners, who help in the purchase of the company. This is the communcations dept. Ask for Don Meyer 202-898-0995.

Dec 16, 2008 | Baby Gear

Not finding what you are looking for?
Eddie Bauer Glacier Vector Jogger Logo

1,555 people viewed this question

Ask a Question

Usually answered in minutes!

Top Eddie Bauer Baby Gear Experts

Iron
Iron

Level 3 Expert

3018 Answers

Jennifer Rock
Jennifer Rock

Level 2 Expert

105 Answers

Alan Timperley
Alan Timperley

Level 2 Expert

91 Answers

Are you an Eddie Bauer Baby Gear Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...