I bount this on ebay without wire harness. I have the wire harness converter for my car but i need the one that connectes the power and speakers to the back of the unit. Ive tried searching the internet and tried calling around audio shops and no one has this. Its a 2008 version and it has 16 pins 8 top and 8 on bottom.. I have the harness for a peh-6800 my old unit and its too wide but thats a 2006 model. Anyone tell me what should i do. I have this bran new head unit and i cant even use it. I saw someone else had this same unit but i tried to check it and the ebay aution had ended. Please help me
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I can tell you it will be no diffrent installingthis radio then any other radio in any car as long as you got ground +common -common ground and 12V+ Standing power 12V+ ingntion swtich power ons you will be great!! Just make sure you download a diagram of you wire harness on the internet. Print it out and take it to your jeep and careully follow the instructions on there if you need any help give me a shout :)
You Bet! First go to www.PioneerElectronics.com and go to the Bottom of the Page, Look for Customer Service, Look up your Model and Look for the Harness. If that does not work go to www.Crutchfield.com and Tell them what your Prob is and they can help you get one!
The glovebox is the easiest. I managed to find a "hole" to run the cable through from the compartment to the rear of the head unit. Use a flashlight to help you find possible places to run the cable through. Either shine flashlight from glovebox into console or vice versa. Look for where light shines through to find place to run cable. Use a wire hanger to run cable through the hole if it isn't accessible by hand.
For mic, I just removed the drivers side A-pillar trim and placed wire in there. Attached mic to visor. Some wire is visible, but not much.