Frigidaire washer FTF530F, front loader, two years old. Was getting ready to go into the final spin and stopped. Now will not turn on at all. The door lock light will light up when the knob is pulled out but the door itself is not locked. The light is the only thing that works. What is the problem?
You have a burned out door assembly. This is very common, min just went out. I purchased a new door latch assembly at my local parts supplier and hubby is replacing now. The part costs $50-$55, but is cheaper than a repair man if you can replace it yourself. Must remove entire front panel from washer to get to door latch to replace, but should fix the problem.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
After charging me $275 to change the water pump, the repairman said I needed a new computer board for another $160. I went & bought a new washer - this time a regular top loader mechanical washer with no computer. The repairman said computerized washers & front loaders in particular have lots of problems. He said top loader Whirlpools have the least problems.
You said, you have a Frigidaire front loader and it will not spin out in the final spin would you please help me. thanks
For a Frigidaire usually , If the washer won't spin. Many times it's because the load is too small. Add 1 or 2 similar items to help balance the load. If it does not remedy the problem try unplugging the machine for 5 minutes which will reset the system!
Let me now how it goes. Huuum Please remember to leave a rating
just had my frigidaire fronter loader repaired,,try the door switch ...mines wouldnt spin clothes were soaked did everything else fine... what may have happen is when the spin cycle is ready to do its part it double checks to see if door is locked but with a bad switch it sends the wrong signal and computer this the door is open so it shuts off....well gl mines is running got lots of laundry to do,.,,,hope this helps