Question about Digix HT1056A DVD

2 Answers

DVD picture rolls vertically

When I turn on my Digix DVD player, even before I put in a DVD disc, the picture rolls vertically. The player will accept a DVD disc and start it playing, but the picture continues to roll vertically then too. Remember the vertical hold control on older TVs? That is what I am talking about. I do not know of a vertical hold control button for my DVD player.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Somehow the TV setting on the DVD player was set to PALS so we changed it to the proper setting.

Posted on Dec 17, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Found my DVD user manual online then went on here and found the answer. Was going to pitch player out and then I reset the...nspc/ pal /auto... setting by pushing a button ( NP ) on the DVD player remote and now it's working fine with no vertical row..."so far"...LOL

Posted on Dec 05, 2012

  • albert pollard
    albert pollard Apr 27, 2015

    there is no NP button on my remote

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can't get open to put disc in


Some units have a small hole right below where the tray opens ,you can put a paper clip in it and push to open the door.If yours doesn't have this try turning the power off for 10 seconds and turning back on,if you are using a remote to work the player try using the buttons on front of the player.Good Luck and I hope that this helps you..

Jan 14, 2013 | Digix DVD & Blu-Ray Players

1 Answer

No Vertical Hold, black and white picture only


find the N/P button on you rermote press it select NTSC

May 06, 2009 | DVD & Blu-Ray Players

1 Answer

Problem with vertical hold.


with your control push the set up button and on TV Output choose NTSC and Video Output choose S- Video.

Feb 15, 2009 | TruTech TT320

1 Answer

Picture Rolls


anteetina,

most probably your problem is within color system settings. It's either PAL/NTSC or PAL SECAM signals being produced by your player.

1) try to check your TV screen with regards to color system it use, check the color setting if it does indicate "Auto" "PAL" or "NTSC" try to choose "auto" and see if any changes will occur.

note: you can also check the service manual of your DVD player of what color system it produce and if it's match with your TV screen

cheers.
mark

Jan 15, 2009 | Digix HT1056A DVD

1 Answer

Won't accept any dvd disc


It sounds like the Laser went out. Buy a new dvd player

Jan 13, 2009 | Samsung DVD-VR330 VCR and DVD Recorder

1 Answer

Digix Manual/diagrams do not match my TV connectors


Simplest way. ++++++++++
If you have red, white and yellow on each match those and use a cable with 3 strands - red, yellow and white ends with RCA jacks. Use the setup key to get an onscreen display to set options.  Make sure they are the video/audio OUT on the DVD not in.
On your TV it's probably Video 1 or something like that - you can usually test this by putting the cables into the front of the TV. The TV remote might have some key like TV/Video to get to the Video input screen.  Make sure you check the video-in ports on the TV - not the video/audio-out.
Option if red is missing +++++++++++++++++ If the DVD player just has yellow and white then just connect yellow and white (it will be mono) on the TV.
It shouldn't matter if the holes are vertical or horizontal.
S-video +++++++ If both TV and DVD have S-video ports then connect those - they will give you better video than the yellow.
You will still need to connect red and white sound cables.


Jan 04, 2009 | Digix DVD & Blu-Ray Players

1 Answer

Cyberhome 402 DVD "rolls"


I think I had switched to the PAL format by mistake. Fixed the problem by buying a new DVD player, was cheaper than the factory fix.

Jul 30, 2008 | Cyberhome CH-DVD 300 DVD Player

1 Answer

Picture rolls


Same as sherpi here, player was fine, and all of sudden started rolling and never stops. Rolls with or without a disc in it...seems to play the discs fine, but never quits rolling.

Mar 08, 2008 | Spectroniq PD-1100 DVD Player

1 Answer

The picture on the VCR keeps rolling. How do I remedy this? I have a Sylvania cca-132a2 model.


i know this may seem old-school, but try turning the vertical hold knob. it used to solve all vcr problems with rolling picture.

Jul 07, 2007 | Sylvania (SRDD495) DVD Player/VCR

1 Answer

Picture keeps rolling


The picture rolling is simply because the PAL decoder can't lock up to the 60Hz vertical sync pulses, even if your DVD player is set to NTSC-PAL conversion and there is no vertical hold adjustment (either external or internal) on this model set to achieve this. There is a possible alternative only if your DVD player has RGB output (not component). The JVC for example has direct RGB drive capability via the SCART input on the back panel. If you get a suitable lead you could try getting a picture this way as it bypasses the decoding and sync sep circuits in the PAL decoder chip.

Oct 03, 2005 | Panasonic DVD-F87 Multi-disc DVD Player

Not finding what you are looking for?
Digix HT1056A DVD Logo

751 people viewed this question

Ask a Question

Usually answered in minutes!

Top Digix DVD & Blu-Ray Players Experts

Gareth Cockram
Gareth Cockram

Level 3 Expert

657 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

The Knight
The Knight

Level 3 Expert

68368 Answers

Are you a Digix DVD and Blu-Ray Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...