Question about Frigidaire 24 in. PLD3465REC Stainless Steel Built-in Dishwasher

Open Question

CL code light on

New fridgidaire dishwasher - tried turning on just get CL code that flashes, latch shuts good. tried test cycle, no error codes - how long should it stay on 1 when in test cycle etc.....- heard it could be seal?
I can go manually through each test cycle 1-8 seems to work no error codes. when done test try it again get flashing CL code can hear motor but not water - but in test get water in appropriate cycle - help!!!!

Posted by on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
ginko
  • 19396 Answers

SOURCE: Electorlux dishwasher flashing CL

Error CL means that the child lock had been activated.
To unlock the machine you should put your finger up inside the handle and locate a slider switch, then push the switch to to the left side.

Posted on Oct 24, 2008

Ad
joe_lishman
  • 192 Answers

SOURCE: Fridgidaire FDB1250REC dishwasher comes on, fills

This seems to be the "anti flood" device at the base of the washer is triggered due to water at the base of the washer. This safety device consists of a polystireene float and a micro switch that detects water leaks/spills and automatically puts the washer in pump out mode. You need to find the leak (hose or clamp)dry the base and rectifythe leak it before the washer works.

Posted on Mar 22, 2010

marka19
  • 1430 Answers

SOURCE: Flashes "CL" to close door when it is closed and won't start

The door switch has failed. There is a video at www.appliancehelponline.com/servicemanual.html that will walk you thru testing and replacing. It may be a different model but the process will be the same. You can also enter your model # for diagrams and illustrations of your specific model.

Posted on May 21, 2010

Daniel S
  • 4323 Answers

SOURCE: On the display is a flashing CL, according to the

Hi

Error CL appears when the dishwasher control detects door switch is open or door is open. You'll have to open the door and check the continuity of the door switch. If the door seems to be closed then it is the control has detected an issue with the door latch. Check the door latch & seals to make sure door is closing fine. Unplug the dishwasher from power outlet and wait for 10-15 minutes. Restart the dishwasher and check if the error is still there. If error still appears then you'll need to repalce the door switch/door latch. Hope this helps... Please post back for further assistance.

Daniel

Posted on Nov 26, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My dishwasher FDB2510LCC1 get a cl code while washing and stays running on the wash stage until it is shut off


Hello Randy, thank you for your inquiry!
From the information you have provided your Frigidaire dishwasher is displaying an error code of "CL" this means close door. The dishwasher may not be sensing that the door switch is closed. The "CL" means that you could have a possible issue with the main control board or door latch. I would recommend checking to make sure the latch does not have any visible damage. This could also be a miscommunication within your dishwasher and a reset may help clear it out. In order to reset the dishwasher you would flip the household circuit breaker off for at least ten minutes. We hope this information is helpful to you. -Matt

Jan 28, 2016 | Frigidaire Dishwashers

1 Answer

I have a Frigidaire dishwasher it is showing a code cl which means its not closed. I just replaced the latch with a bran new one and still is reading the code. any suggestions


Good Afternoon friend, I appreciate your post!

From what you have described your Frigidaire dishwasher is displaying an error code of "CL" and you have replaced the latch. Since the latch has been replaced it could be a problem with the wiring harness or main control. I would recommend having a professional out to perform a diagnosis and this will help you to avoid any unnecessary part purchases. Best of luck! -Matt

Mar 10, 2015 | Frigidaire Dishwashers

1 Answer

I have a Frigidaire dishwasher model # FDB2415LFSO with a blinking CL code. When I try the normal wash cycle button the drain pump runs and the CL light blinks continuously and nothing more happens. The...


Good Afternoon friend, thank you for your post!

Based off what you have described you have performed multiple tests to your Frigidaire dishwasher and it continues to display a "CL". That code does stand for close door which can mean that the door switch is sensing it is opened. For this error code it could be a possible problem with your door switch or main control. I understand you stated that the control did not appear to have a burn inside of it so it is easy to assume that the door latch could be the issue. Remember if you are not a professional technician this could be the start of unnecessary part purchases. I hope this information is helpful to some degree. -Matt

Feb 24, 2015 | Frigidaire Dishwashers

1 Answer

What does fridgidaire dishwasher error code pf mean


Usually the PF code means a power failure. You should check the wiring to the machine for loose wire nuts or wires with missing insulation touching each other or the side of the wiring housing. (You'll need to remove the access panel at the bottom of the dishwasher to check the wiring.)

If the wiring is fine, check the switches in the door latch. The white wires should test fine for continuity. If those switches are fine, then the control board has a wiring fault. Replace the appropriate parts. If your dishwasher is under warranty, contact Frigidaire.

If you add a comment with the model of your dishwasher, I may be able to help you find the replacement parts.

I hope this helps.

Cindy Wells

Sep 21, 2014 | Dishwashers

1 Answer

Why does display flashes "cl"?


Good Afternoon Friend,

I understand the display is flashing "cl" on your Frigidaire dishwasher, model# GLD2450RD. The "cl" code you are seeing is stating to close your dishwasher door. The status indicator lights will also flash to indicate current cycle status. If the door is closed, try pushing it in just to make sure. I ask that you please follow up with a comment on the post, at your convenience, to advise if further troubleshooting is needed or if your appliances status has changed successfully. Hope this is helpful.

-Best Regards-
WP

Jun 30, 2014 | Frigidaire GLD2450RD Built-in Dishwasher

1 Answer

On the display is a flashing CL, according to the manual the latch is not closed. Tried several times to close the door and push the normal wash button. Nothing happens, only the CL light is on. Tried...


Hi

Error CL appears when the dishwasher control detects door switch is open or door is open. You'll have to open the door and check the continuity of the door switch. If the door seems to be closed then it is the control has detected an issue with the door latch. Check the door latch & seals to make sure door is closing fine. Unplug the dishwasher from power outlet and wait for 10-15 minutes. Restart the dishwasher and check if the error is still there. If error still appears then you'll need to repalce the door switch/door latch. Hope this helps... Please post back for further assistance.

Daniel

Nov 26, 2010 | Frigidaire PLD2855RFC Dishwasher

2 Answers

Flashes "CL" to close door when it is closed and won't start


The door switch has failed. There is a video at www.appliancehelponline.com/servicemanual.html that will walk you thru testing and replacing. It may be a different model but the process will be the same. You can also enter your model # for diagrams and illustrations of your specific model.

May 21, 2010 | Frigidaire Dishwashers

1 Answer

Error code cl


See the CL error and the door is indeed shut, pull gently back on the door. if you hear a click and the unit starts running again, it may be the gasket. It could be that the unit is off balance making the door not even or enough play in the door so that the locking mechanisim thinking that the door was not closed try that.

Error Code: CL
Reason for the Code: Door switch open or door is open
Possible Component to replace: Door latch

Hope helps with this. Good luck.


Jan 20, 2010 | Frigidaire Dishwashers

1 Answer

Cl code problem on fridgidaire dishwasher


Code "Cl" on Frigidaire means the door is not closed. Could be a bad door latch.

Dec 15, 2008 | Dishwashers

2 Answers

Frigidaire Dishwasher CL error light


sound as if your having an issue with the latch not closing properly( switches not making contact inside) yo can take apart, requires dropping the front panels and checking the switches, or replace the entire switch costs about 60 bucks part number 154529403 (black handle)

Mar 24, 2008 | Dishwashers

Not finding what you are looking for?
Frigidaire 24 in. PLD3465REC Stainless Steel Built-in Dishwasher Logo

Related Topics:

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Dishwashers Experts

Carmen Mikulic

Level 2 Expert

415 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Mike

Level 3 Expert

4354 Answers

Are you a Frigidaire Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...