Question about Toshiba CT-90157 Remote Control
Pleas I need some help I got a bran new Toshiba CT-900037 remote control and is not working, I have tryed everything, is tere a way i can program it?
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Scroll down to the remote section page 12 -13 its in there... I have this same remote and just programmed it.. Good Luck to you!
Posted on Nov 06, 2008
This remote is programed by holding the CODE button and pressing the electronic button that you want to be programed. (For example press and hold CODE and hit DVD.) After you do this you have 10 seconds to input the 2 digit program code for the electronic you want programed. If your manual doesn't have these codes you can This One on page 13.
Hope this helps
Posted on Feb 07, 2009
step 1, select the funtion you wish to program on left side.
step 2 hold down the recall button while entering the 3 digit code for the device you wish to program
step 3 have a beer, you are done
Here is the link for the owner's manual that also has the codes
Posted on Feb 26, 2009
Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Pull up older posts. http://electro-medical.blogspot.com/
In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.
Before going further; try a hard reset first. If it does not help you, replace the main digital board. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; visit the site linked here.
Posted on Jan 07, 2017
Tips for a great answer:
Dec 20, 2016 | Toshiba Televison & Video
Apr 08, 2013 | Toshiba DC-SB1 Remote Control
Dec 01, 2012 | Televison & Video
Nov 02, 2010 | Toshiba Televison & Video
May 16, 2010 | Toshiba 32A41 32" TV
May 19, 2009 | Toshiba 34HD82 34" TV
Feb 12, 2009 | Toshiba CZ32V61 32" TV
Nov 16, 2007 | Toshiba CT-90157 Remote Control
84 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: