Question about Pioneer KEH-P4400 CD Changer

2 Answers

Can't remove KEH-P449 AM/FM/Cassette player

This unit is mounted flush at the navigation station in my 1997 Catalina 34 sailboat in a bracket and I can't get the unit to release from the bracket so that I can remove it and the bracket. I don't have a manual, so I can't read about the removal process.

I've gotten the left side of the unit to release (somehow) and tried to jiggle the unit from behind to free the right side, but the right side won't release. I didn't try to force it, since it could break of really get jammed. I didn't see any release buttons or knobs on the front panel that would have made releasing the unit obvious.

If I could release the frame/bracket behind the nav station wall and remove the bracket and unit together, that would be even better, since I want to mount a new ICOM 504 VHF radio next to it (I need access to the side of the VHF radio so that I can mount an installation bracket behind the nav station wall to hold the VHF radio in place).

Does all of that make sense, or should I send pictures of the set-up? thanks, Jon Arck

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,061 Answers

ON THE FRONT THERE ARE TWO HOLES ONE PER SIDE IN CENTER THAT TAKES A U-SHAPED TOOL TO REMOVE YOU PUSH IN AND UNIT COMES OUT.CONTACT PIONEER FOR ONE OR A STEREO INSTALLER.RICHARDM69

Posted on Dec 15, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Pioneer Master
  • 19,396 Answers

You need to use tools, like two big screwdrivers, and you push two of them at the same time to pull out the radio.

Posted on Dec 15, 2008

  • Ginko
    Ginko Dec 15, 2008

    Sorry, the instruction were for the radio. Check if there is a screw keeping the CD changer, don't force it.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I bought a '96 Mustang with an Alpine CHM 5620 CD player already installed. The unit appears in great shape and looks as if it were installed by a pro. It seems to load up the CD cartridge and change CDs...


This model of cd changer doesn't have the fm modual built into it. So I am wonder how this setup worked before. Most of these units had an FM tansmitter in them and you would just turn on your factory radio and set the fm tuner to a certain frequency like 89.5 or 91.3, not excatly sure on the right number, but somewhere low in the range. Turn on the stero and try tuning into differnet stations.

But like I said this model is desgined to be used with a aftermarket head unit with the proper wired connection going from the cd changer to the head unit.

Sep 21, 2010 | Alpine Car Audio & Video

1 Answer

I have a pioneer KEH-P4100RDS head unit which the display has gone dim on ( seemed to half go out then a day or so later go fully out ), everything else works so was wondering if it is possible to replace...


Another issue with detachable face units is the spring on the latch gets weak over time and the contacts will not be 100% reliable. Try cleaning the contacts between the unit and the faceplate and also make sure there is not debris in any of the latching mechanisms that could be causing the face to not sit totally flush on the receiver. By the way, cassette tapes...really?

May 31, 2010 | Pioneer DEH-P645 CD Changer

3 Answers

What fm station do I set my radio on?


i have a ford explorer, 1995 it came with a 10disc cd changer only trouble is we dont know what radion station we need to use for it can you help?

Apr 15, 2010 | Xtreme Sound WMS6100RW 10-Disc CD Changer

1 Answer

How do i return to my radio from my cassette? The eject button is broken.


Open it, try manual eject, if not look for the switch that monitor between cassette and radio mode, you can do manual connection or switch it manually.get it?

Aug 30, 2009 | Pyle Double Din AM/FM Cassette & CD Player...

1 Answer

Fuse


The 88 Monte came stock with am/fm or am/fm cassette so my guess is your head unit is after market, implying that there may be two in-line fuses on the units power leads

1) 12+ volt Un-switched constant feed (memory)
2) 12+ volt Switched feed (operation)

If you can not locate these fuses from under the dash, then you may need to remove the head unit to inspect the wires that connect to the rear for the in-line fuses.

When you reinstall the unit, be sure to make those in-line fuses accessible from under the dash.

Good luck
Aduz

Mar 14, 2009 | Car Audio & Video

1 Answer

Car cassette player


yes the rubber rollers inside your unit have become hard,,and they are slipping, and the unit detects this,, u can purchase a product called re-grip [ for rubber products and it treats the rubber in such a way to make it soft and pliable again ] the product is sold by mcm electronics and can be found online,,, treat the surfaces of the rubber rollers in your unit and it should preform to original specs....any further help please email me at troublerst@hotmail.com...i hope this helps you

Jul 03, 2007 | Sony XR-C6100 CD Changer

Not finding what you are looking for?
Car Audio & Video Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Car Audio & Video Experts

Michael Kovalik III
Michael Kovalik III

Level 2 Expert

117 Answers

The Knight
The Knight

Level 3 Expert

69808 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Pioneer Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...