Question about AT&T Blackberry Curve 8300 Smartphone

1 Answer

PHONE WORKS WITH HEADSET PLUGGED IN BUT NOT WHEN UNPLUGGED

WHEN I UNPLUG MY HEADSET MY HANDSET MAKES A CLICKING NOISE AND CHOPS UP WHAT THE PERSON ON THE OTHER END OF THE PHONES VOICE. SOMETIMES I CAN HALFWAY PULL OUT HEADSET AND HANDSET WILL WORK BUT THIS IS ONLY SOMETIMES.

Posted by on

  • erarein1 Dec 14, 2008

    on status i get how much battery is left, i have the 8300

  • erarein1 Dec 14, 2008

    I think you are asking 4.2

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 78 Answers

What model or Blackberry do you have? What os are you running on your phone? Check by going to settings/options then status.

Posted on Dec 14, 2008

  • Rhys Parker Dec 14, 2008

    Ok, it is an issue with 4.2 OS. you will have to upgrade the device to 4.5. Visit www.blackberry.com/btsc for instructions on how to do this.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The handset will lift when I press the mfb but I get no volume or mic from the headset. It does not seem to be communicating with the phone. Tried unplugging the power, but that didn't solve it. We...


Your solution will depend on what type of phone and headset you have. I have a Polycom 501 IP phone with a headset jack and a GN Netcom 9125. I'm not using the lifter right now, but I seem to recall that an easy way to make it work was to plug the curly cord of the phone's handset into the bottom of the base unit, so that the cord went from the base of the headset to the headset jack on the base of the phone.

Jul 11, 2011 | GN Netcom GN 1000 RHL Wireless Headset

1 Answer

I cannot answer the phone. I cannot make a call.


Thanks guys! All I did was unplug the main phone and plug it back in. All 4 of the handsets now work!

Jan 23, 2010 | Panasonic KX-TGA101S Cordless Handset

1 Answer

Speaker works but handset does not. replaced


Make sure to use a new handset cord as well. Also, make sure the handset is plugged into the handset jack under the phone. The 3102 phone has a headset jack that will not work with the handset. There is also a button mapped by default in the upper right corner that toggles from handset to headset. If the light is on, then it is set for headset and the handset won't work.

Dec 18, 2009 | 3Com NBX 3102 IP Phone

2 Answers

Have 2 t7316e nortel phones...i can hear the other person, but they can't hear me...tried swapping handset, but that didn't resolve the issue...any answers?


Look at the bottom of the set that is giving you troubles, check to see if the handset is plugged into the correct spot.

It should be plugged into the Handset jack not the headset jack.

This is a common mistake.

Feb 23, 2009 | NorStar T7316E Telephone

1 Answer

I have a CS60 Handset doesnt work when the headset is connected


First setup the headset as follows:

  • Locate the 2 ports on the bottom of the CS60 charging base. One has an icon of a "full telephone" and the other has an icon of a "hand receiver."
  • Unplug the hand receiver from the base of your existing telephone and plug it into the "hand receiver" port on the CS60 base unit.
  • Then take the short cable that came with the CS60 and plug it into the "full telephone" port on the base of the CS60.
  • Plug the other end of the short cord into the hand receiver port of your telephone (where the hand receiver just was).
  • Make sure the AC Power is plugged into the wall, and then you can adjust the configuration settings.
To be able to hear or speak through the handset, either place the headset back into its charging cradle or press the call control button on the side of the headset. The talk indicator light on the base should go off and no sound will come through the headset.

Note: Make sure that the cables are connected correctly and the handset cable is connected to the base of the CS60 base.


Jan 27, 2009 | Plantronics CS60 Professional Headset

3 Answers

Blackberry curve works with headset but not when headset removed


I have this same exact problem!! here is what works for me to fix it.. i plug the hands-free headset half way into the phone and then tilt it down (to push the jack up toward the front of the phone). After that i am able to use the phone regular again (speakerphone and internal earpiece works again.) I find that i have to do this once a day. There seams to be a short or something on the whole jack piece.. sometimes i actually just use my finger to wiggle the outside of the 3.5mm jack on the phone and that fixes it to! but i also found that there is replacement pieces like this on EBAY..
http://cgi.ebay.com/FLEX-CABLE-EARPHONE-JACK-FOR-BLACKBERRY-CURVE-8900_W0QQitemZ350187872475QQcmdZViewItemQQptZPDA_Accessories?hash=item350187872475&_trksid=p3286.c0.m14&_trkparms=72%3A1205|66%3A2|65%3A12|39%3A1|240%3A1318|301%3A1|293%3A2|294%3A50

Dec 14, 2008 | RIM BlackBerry Curve 8310 Smartphone

1 Answer

GN 9350 Wireless Headset doesn't ring on the headset when phone rings


It only picks up certain digital rings. I changed the ringer on my phone and had the same problem. To fix it, I had to plug in the little microphone that plugs into the handset lifter and place the mic over the ringer speaker. Now it works fine.

Jul 11, 2008 | GN Netcom GN 9350 Wireless Headset

3 Answers

Every handset is showing me connecting ...


I am having the same problem. I unplugged everything, and nothing changed. Phone #2 comes back sporadically. Has anyone gotten word from Vtech?

Jan 20, 2008 | Vtech mi6896 Trio Cordless Phone

Not finding what you are looking for?
AT&T Blackberry Curve 8300 Smartphone Logo

Related Topics:

191 people viewed this question

Ask a Question

Usually answered in minutes!

Top AT&T Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18384 Answers

castletech
castletech

Level 3 Expert

364 Answers

Are you an AT&T Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...