Question about DameWare Mini Remote Control 4.x (dmrcupg) for PC

1 Answer

I have a Control 4 system. While playing CD's, the TV screen flashes "no signal" and the music will eventually stop. I was told to press the "fn" and "f4" key on the computer to switch itover, but it isn't working!

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 4 Answers

If i understand you right, you are playing your CD from your computer. If this is correct, you should burn your cd's into MP3 format with windows media center. Then let you Control 4 system get your music through your network.(you will need to call your Control4 dealer to setup this.) You should use a network hard drive to save you music to. but it can be done with only your computer. If you use your computer you need to make sure that your computer stays on, so turn off the screen saver and your power standby and hibernate options.


I hope this helps. If you live in Utah, I work for a control 4 dealer in Draper. If you have any more questions, e-mail me at joe.4home@gmail.com you could also visit a end user control4 site at http://www.c4forums.com/


Joe

Posted on Jul 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

It's connected to my iMac, and obviously powered up, but not showing up. What am I doing wrong?


did you run the install cd for the device? if you did and it may not have worked go to control panel uninstall and retry it a virus blocker can stop certain parts of a download allow it threw your anti virus.

Nov 28, 2015 | Seagate Backup Plus for Mac 500GB Portable...

1 Answer

Message waiting light is flashing but no messages are recorded. I have turned this off at Options but message waiting display keeps coming back..what do I do.


There is a call back feature in the system. Sometimes when you receive an internal call from another extension and you are on another call the caller will hit callback. You actually have to return the call to that extension to stop the light from flashing.

Feb 28, 2014 | Nortel Network Software & Management Tools

1 Answer

How do i transfer a call from a cordless telephone that is hooked up via the ata port on a cics compact?


From an analog phone, press "LINK (star) 7 0".

Link is sometimes called FLASH or RECALL. If your analog phone does not have the buttons, you can use the switchhook button. The switchhook must be depressed for one-half of one second for the system to recognize the "flash".

Good Luck!

Aug 03, 2010 | NorStar CICS Standard 6.0 (NT7B65AABP) for...

1 Answer

Yahoo music on messenger. the commercials play but


I had the exact same problem as you and it very frustraiting.

I called Yahoo and they said that they are experiencing problems with the messenger 10 in a number of regions in some countries.

Feb 13, 2010 | Network Software & Management Tools

1 Answer

My driver cd is broken


Kindly mention the product detail (model no etc), I will send you the link to download the cd

Sep 23, 2009 | Network Software & Management Tools

1 Answer

Cracked VGN NR32M sony notebook screen


if it has a plug for bga ...than it will work with an external monitor...most laptops are working just fine with external monitor..

Sep 08, 2009 | Network Software & Management Tools

1 Answer

Whenever I tried to install the program I get a message saying that the messenger has stopped working and needs to close. When I let windows find a solution it never does. I am using Vista Ultimate. I had...


Hi...
The first step you should try is to uninstall by going into (control panel > add remove program) the mesanger and download the windows messanger.
http://download.live.com/
and reinstall it.
If that doesn't work the windows have to be repaired, you should have the windows CD for that..
Configure your computer to start from the CD-ROM drive. For more information about how to do this, refer to your computer's documentation or contact your computer manufacturer. Then insert your Windows XP Setup CD, and restart your computer.
1.
When the Press any key to boot from CD message is displayed on your screen, press a key to start your computer from the Windows XP CD.
2.
Press ENTER when you see the message To setup Windows XP now, and then press ENTER displayed on the Welcome to Setup screen.
3.
Do not choose the option to press R to use the Recovery Console.
4.
In the Windows XP Licensing Agreement, press F8 to agree to the license agreement.
5.
Make sure that your current installation of Windows XP is selected in the box, and then press R to repair Windows XP.
6.
Follow the instructions on the screen to complete Setup.


Let me know
Thanks
Smith

Aug 08, 2009 | Network Software & Management Tools

1 Answer

Control 4 system


I think you double posted, so I will just mimic my other answer


If i understand you right, you are playing your CD from your computer. If this is correct, you should burn your cd's into MP3 format with windows media center. Then let you Control 4 system get your music through your network.(you will need to call your Control4 dealer to setup this.) You should use a network hard drive to save you music to. but it can be done with only your computer. If you use your computer you need to make sure that your computer stays on, so turn off the screen saver and your power standby and hibernate options.


I hope this helps. If you live in Utah, I work for a control 4 dealer in Draper. If you have any more questions, e-mail me at joe.4home@gmail.com you could also visit a end user control4 site at http://www.c4forums.com/


Joe

Dec 14, 2008 | DameWare Mini Remote Control 4.x (dmrcupg)...

2 Answers

Uninstalling Anti-virus Software


go to your main window. select start and run. in the window that pops up, type regedit and enter or ok. the registry screen comes up. choose edit and "find." in that window type any occurence of the trend program - any names associated with it. and hit ok. it will scan the registry and stop when it finds anything doing with trend or its wording. right click on the item and it will verify that you want to delete it, say yes and its gone! now hit F3 it will continue its search and stop. do again what you did above and hit F3 again. even if you manage to delete the program through control panel add/remove programs, a mirror file stays in the registry unless you do a regedit to remove it. be careful, the registry runs your machine. delete the wrong thing and you could be reformatting your hard drive.

Sep 01, 2007 | Microsoft Windows Server

Not finding what you are looking for?
Network Software & Management Tools Logo

146 people viewed this question

Ask a Question

Usually answered in minutes!

Top DameWare Network Software & Management Tools Experts

Jax Planet
Jax Planet

Level 2 Expert

921 Answers

caffeene

Level 1 Expert

4 Answers

Shahzad  Waseem...
Shahzad Waseem...

Level 3 Expert

746 Answers

Are you a DameWare Network Software and Management Tool Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...