Question about Dynex DX-E401 Router

1 Answer

Dynex DX-E401 Router setup

Cannot get past the log on when setting up. instructions say to use "admin" for username and to leave password blank. This does not work. Keeps asking for password. i'm trying to connect to desktops to my dynex dx-e401 can someone plz help me

Posted by on

  • asasasasasas Dec 15, 2008

    i am having the same issue my dad says he did not set the password and it is starting to get im my nerves i am trying to start a moparscape server(no comments) and i need to port forward but i have no solution. some help would be very very apreciated.

  • asasasasasas Dec 15, 2008

    i forgot to mention that i also have the same router if that helps anything (sorry if double posting is agaisnt the rules)just thought it would help.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,338 Answers

Here is the manual, and it states that to get into the router you use admin as the user name and password is blank. I would suggest that you reset the router. The reset button is on the back next to the power connector. Use a paper clip and push the reset button in for about 30 seconds till the lights flash. Then you should be able to log into the setup page and set it up .
http://www.dynexproducts.com/skins/skin_1/Topics/Documents/DX-E401_Installation%20Guide.pdf

copy and paste the complete link into your browser.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

Posted on Dec 15, 2008

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

User admin, password admin, do not work on the Dynex router I just bought. These are specified in the manual, as well as the address (192.168.1.1) which seems to be correct. What other user/password values...


If this router is brand new and has not yet been configured, try using "admin" (without the quotes) for the username, and leave the password field blank. Press the "OK" button; you should be directed to a welcome screen. From there, click "Run Wizard" and you should be taken to a screen prompting you to create a new password for the router.

If you found this solution helpful, please leave a positive rating!

Aug 18, 2011 | Dynex DX-E401 Router

1 Answer

Trying to acces dynex router for xbox live and need a " pass phrase " lost the manual how do i connect


The Manual:
http://dynexproducts.com/cms/documents/DX-E401%20User%20Guide.pdf

The default address of the router is 192.168.0.1. Type that address into a web browser on a computer connected to the network and it should bring up the login screen for the router. The default login for the router is Username: admin with a blank password. If you changed this, you will need to reset the router with the reset button and configure your entire network again to make changes.

May 20, 2011 | Dynex DX-E401 Router

1 Answer

What is the factory default username and password to log into the router for setup?


Hi.

Ip address is: 192.168.2.1

click login and enter admin for the username. Leave the password field blank.

Hope this helps!

Feb 19, 2011 | Dynex Routers

1 Answer

How do i change a password


If you don't have the current password, you will have to press the reset button located next to the power connector port. This will reset it back to factory default settings. The you can access it with your browser:

To access the Web-based management utility:

1 Open your Web browser and enter the IP address of the router into the
Location (for Netscape) or Address (for Internet Explorer) field, then press
Enter. The default IP address of the router is 192.168.0.1

For example, type 192.168.0.1

After the connection is established, the logon screen opens.

2 To log in as an administrator, enter the user name of admin and leave the
password field blank (default), then click OK. The Web management Home
screen opens.

You can download the user manual at:
http://www.retrevo.com/support/Dynex-DX-E401-Routers-manual/id/8352ag821/t/2/

Jan 15, 2011 | Dynex DX-E401 Router

1 Answer

I cant get the router to connect to the internet and cant get the password to work to use the set up wizard


On the back of your router press and hold the reset button for about 10 seconds.
This will reset the router to factory defaults.

Open your Web browser and enter the IP address of the router into the Web Browser. The default IP address of the router is 192.168.0.1

After the connection is established, the logon screen opens.

To log in as an administrator, enter the user name of admin and leave the
password field blank (default), then click OK.

Jul 19, 2009 | Dynex DX-E401 Router

1 Answer

Dynex-e402 change nat settings to access x-box live


Dynex DX-E402 router, changing NAT settings(UPnP) to access x-box live. go to router settings web page for router, http://192.168.1.1/, enter user name and password to access settings page. user id is usually admin this also for password. under advanced settings click on forwarding. In listed sub-catagories click on UPnp. click enable. this should solve any NAT issues with X-box 360 signing onto x-box live. dynex dx-e402 was very easy to setup.

Mar 24, 2009 | Dynex DX-E401 Router

1 Answer

Need help dynex security sync wireless


according to the manual that i have, the model if the router that you have, DX-E401, is just a broadband router and doesn't have wireless capability. if that would be the correct model of your device, there's no way that you can enable the wireless encryption since it doesn't have wireless capability. but if you are really using a wireless dynex router, follow the steps below on how to access the router's page and enable the security.

access the router's setup page by typing http://192.168.0.1 on the address bar of your web browser (i.e. internet explorer, firefox etc). by default the username is admin, then leave the password blank.
you will be prompted with the router's page, now go to the wireless settings and look for the encryption field and enbale wpa from there.

if you are not sure whether your router has wireless capability or if you are using another wireless router just give me the exact model and brand then ask me

ciao!

Oct 03, 2008 | Dynex DX-E401 Router

4 Answers

Dynex DX-E401 Router setup


Reset the router, Theres usually a push button on the back of it to reset it's cmos back to default. Then the instructions included should work. If not, you can always use John the ripper (linux) or cain and able (windows) to crack into it.

Nov 30, 2007 | ViewSonic WR100 Router

1 Answer

Set up


No u don't leave it blank the password IS blank so u just type in admin for the user name and then type in BLANK for your password then after than u can change your password but he username remains then same.

Nov 29, 2007 | Dynex DX-E401 Router

Not finding what you are looking for?
Routers Logo

Related Topics:

631 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dynex Routers Experts

Willem.
Willem.

Level 2 Expert

345 Answers

Richard Finch

Level 3 Expert

397 Answers

CKsystems

Level 2 Expert

72 Answers

Are you a Dynex Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...