Question about Panasonic PT-AE900U Multimedia Projector

1 Answer

Panasonic pt ae900 wont fire up

Panasonic pt ae900 green power comes on trys to start up after 2 times then red lamp light turns on 800 hrs on lamp cleaned the filter checked the globe . How can you check if globe burnt out

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

First , start over and unplug it. Wait a few minutes. Turn on AV system that is connected to it but not video or dvd player. With remote, point at is corectly and push power 1 sec or as soon as you see green light come on. Be quick.
If this fails you can wait 4 hours and repeat. OR try only projector with out any feed.

Let me know if this worked.

Posted on Dec 27, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I've just replaced the lamp on my Panasonic PT-LM2E projector and it will switch on but no light comes out. The previous lamp blew in the projector after around 2000 hrs. The indicators are as...


I'd recommend checking the fans of the projector, and make sure that they're spinning. Since you've mentioned that the lamp blew inside the unit, bits and pieces of the lamp might have lodged itself within the fans. It might also have to do w/ the after-market replacement bulb, which I normally wouldn't recommend.

Aug 08, 2011 | Panasonic PT-AE900U Multimedia Projector

1 Answer

As all the posts on here I have the same problem. My panasonic pt-lb10u turns on, green light flashes, fan comes on. Then the green light turns red and the red lamp indicator light comes on. No light emits...


Hi,

If your projector won't fire up then you can't reset the lamp counter so that is not the problem.

The combination of LEDs you have given does not correspond to an error message. There should be two LEDs, one of which is the Lamp Indicator, and the other is the Temp Indicator.

It's possible that an overheating problem has caused this. Make sure the projector is in an area where the temprature is between 0 °C (32 °F) and 40 °C (104 °F) and the humidity is between 20% and 80% (with no condensation). It shopuld have unobstructed air flow around it.

Disconnect the power. Remove the lamp and place it aside. Clean the air filters, using a hoover, being careful not to damage the filter which is located on the underside at the front of the projector under a flap.

Carefully reinstall the lamp (when you say you replaced the lamp, did you buy a new PANASONIC lamp from a reputable source?) Try to fire up the projector. Note down any combination of LEDs if the projector doesn't work and post hem back here.



.

Feb 14, 2011 | Panasonic PT-LB10VU Multimedia Projector

1 Answer

I own a panasonic pt-ae900e i have notice a thin uneven green transpairant line in the middle of the screen lamp time 1987 hrs


Experience:
There is three LCD (liquid crystal display) in your projector when one LCD faulty he display a line some time flickering line one or two lines. Due to other two LCD is working well so this line is looking transparent. If BLUE LCD faulty than the line color is very light green or yellow.

Second option is this that your projector lamp life is near to end and after 2000 hours projector is very dirty inside and need service.
(service of LCDs and other parts of projector is a very technical job and I don't know you can do it or not)

Jan 16, 2011 | Panasonic PT-AE900U Multimedia Projector

1 Answer

My PT-D5500U will show the red light when the power is plugged in, when I turn on the other power the power light will go green for a moment and then start blinking red. No lamp comes on and the fan gets...


How many hours are on the projector? I would say that you need to change lamps first. Unfortuantely, this series of Panasonic is known for lamp and lamp circuit issues. There are runs of bad lamps...try 2 new lamps if possible or consult an authorized service center.

Good Luck

Aug 11, 2010 | Panasonic PT-D5500U Multimedia Projector

1 Answer

Panasonic PT-AE900E Projector not working???


I have this exact problem too, so anyone out there that can help it would be great!

Mar 03, 2010 | Panasonic PT-AE900U Multimedia Projector

1 Answer

The green light comes on and then a minute late it gets yellow ptax100u panasonic


sounds like a problem with the lamp. bad lamp, reached max hrs, too soon to restrike lamp after power lost, etc. are either of the lamp or temp lights showing anything?
http://service.us.panasonic.com/OPERMANPDF/PTAX100U.PDF

Oct 13, 2009 | Panasonic PT-AX200U Projector

2 Answers

I turn tv on...green light comes on but i get no picture or audio....then light indicator blinks red


Hello!
Lamp or ballast(if lamp has been replaced) is bad.
Explanation: green comes on: system works, waiting for light to shine into light engine: no light is coming out of lamp, system shuts down, then you see red! how to determine: pull the lamp out of the unit's compartment. Inspect lamp: bloated stem? shuttered? reflector is not shiny? Chuck it!
Lamp looks good or just been replaced: try ballast. Close lamp compartment without lamp itself. Make sure, door is shut, as well. Turn unit on and listen close to lamp compartment: good ballast will make a buzzing noise, then stop. You've got "red'! No buzzing: ballast quit. Needs major repair! Lamp must be good, for sure, to get to the last part of diagnostics. Conclusion: more, than 2000 hours of usage: replace lamp first!
Good luck,
Alex.

Jul 29, 2009 | Panasonic PT-D5600U DLP Projector

3 Answers

Nothing comes on except the green standby light on PT-AE900E.


I have the same problem. It seems we have to reset the counter. This reset must be done via the beamer itself and not via remote control, since lamp is not working...

Jul 24, 2009 | Panasonic PT-AE900U Multimedia Projector

2 Answers

Faulty Panasonic Projector


90% that this is a bad psu !

had mine fixed today with used psu from ebay.
try to find a faulty pt-ae900 for a exchange psu !

60€ faulty projector + 60€ psu = 120€ for pt-ae900

hooray :)

cheers,

tobias

Dec 31, 2008 | Panasonic PT-AE900U Multimedia Projector

3 Answers

No image, lamp light blincking red


I have a 3 yr old AE900U dont know exact hours but prob at least 2000 hrs. about every other start up, the projector would flash little box; (replace lamp now). now a month later lamp wont come on. So this is prob the normal way a lamp will die. anything else might be another problem.

Jul 23, 2008 | Panasonic PT-AE900U Multimedia Projector

Not finding what you are looking for?
Panasonic PT-AE900U Multimedia Projector Logo

514 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Office Equipment & Supplies Experts

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

5729 Answers

HEMANT GROVER

Level 2 Expert

166 Answers

Are you a Panasonic Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...