- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
before you connect anything to a computer with an USB cable, you have to install the software that came with the device. No software, no working device. That is all. When you lost the CD, you could try on the support page from Kyocera, if they can help you with the correct software and drivers.
first put the driver cd in your pc's cd rom and run the setup.exe.and click next continue and when " conect your printer now" appear then conect your printer usb cable with cpu and powerup it.and click next to continue.
Hi. Do this install first CD driver of printer. insert into CD or DVD-ROM.you can see instruction.just read step by step before connect the USB printer cable.if finish installation.try to print your data.
it is connected to the pc through USB wire.and u need printer driver installation cd.if u have these both then follow this direction 1)right click the my computer icon 2)click properties and then click hardware n go to device manager. 3)uninstall all usb ports and then scan for hardware changes 4)ur pc will detect your printer and ask for printer drivers 5)re load drivers and your pc will communicate with your printer 6)for reloding install the cd follow the instructions on the screen and click next 7)restart when the printer is loded.connect the wires and cords properly.
Do you have windows xp for os ???? If so deinstall your printer on your computer and disconnect your usb connection.
First install the driver by putting your cd in your computer...Some product will tell you when to connect your usb cable to your computer...if not, make sure your driver is correctly install. After, reboot your PC and plug-in your usb cable and power up your printer....