Question about Juki MO-644D Mechanical Sewing Machine

1 Answer

I purchased a Juki DU-141 new on the internet and had to assymble it with minimal instructions. It seems to basicaly work, but won't pick up the thread from the bobbin. Any ideas, or where I can get a manual? Greg

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

Loopers are probably out of time. I'd suggest calling a good mechanic. This takes some skill and experience to do. As long as the looper tips are not broken, it can probably be retimed within an hours time.

Posted on Dec 15, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am a swimwear designer and just got a juki ddl 8300n did I pick a good machine? How can I adjust the machine for a more stretchy stitch?! What number should my stitch dial be on to get a stretch?


Perhaps a manual would be helpful:

File JUKI DDL 8300N Instruction Manual pdf

You should probably contact the manufacturer with questions. Hopefully, you did some thorough research before purchasing this machine. From the info I found, it appears to be a straight stitch only machine. I don't know anything about this machine, but I would be hesitant to purchase a straight stitch machine for sewing swimwear. Usually, swimwear needs a stretch stitch or zig-zag capability. Just my thoughts...

Amazon com Juki DDL 8700 Industrial Straight Stitch Sewing Machine Arts...

Juki DDL 8300N Industrial Single Needle Lockstitch Sewing Machine with...

JUKI DDL 8300N Straight Stitch Industrial Sewing Machine With Table Lamp...

...

Nov 21, 2016 | Juki Sewing Machines

1 Answer

Compatibility of sewing machine feet


If the width of both machines' presser feet are the same, the only thing you need to worry about is the shank and the form of attachment the shank has to the machine.

According to this, the feet may be compatible:
Generic Presser Feet Accessories
You'll need to verify that the shanks are the same between both machines. Perhaps the Juki dealer can tell you if the feet are compatible.

However, if the presser feet are not compatible with both machines, you can purchase an snap-on adapter shank for the Juki and pick up a kit of snap-on presser feet (these are generic, not Juki made) and you will be set to go for very little outlay of finances. In addition, you could pick up a snap-on adapter for the Husqvarna and you would be able to use the snap-on feet on both machines (in case you don't have some feet for your existing machine).

32PCS Sewing Machine Foot Feet Presser For Brother Janome Yokoyama Juki UL

...

Oct 07, 2016 | Husqvarna Sewing Machines

1 Answer

I need help threading my new juki du 1181 n


contact a Juki dealer & see if they have a manual for your model

Feb 02, 2012 | Juki Sewing Machines

1 Answer

I have a Juki DU-141 with a tread tension issue. When I raise the presser foot the thread tension releases like its supposed to (i think), but if I place a thick piece of fabric under the foot, the tension...


If you are putting too much fabric for the machine to sew this will happen. Does it sew any other fabrics? Some machines....even many commercial machines.........will not sew real heavy fabrics. Any thing over 1/3 of an inch and thats probably the case.

Derek

Jan 18, 2011 | Juki Sewing Machines

1 Answer

I have a Juki DU 141NH industrial sewing machine. I just had it serviced. I had to put a new bobbin in and now the needle is not catching my bobbin thread. Please help!


Be sure you have the proper needle - it is longer than standard needles, plus be sure that you put the needle in from left to right - not...front to back.

Oct 07, 2010 | Juki DDL-8300

1 Answer

How do I thread the Juki MO-644D?


Email me at sewingnz@gmail.com should be able to help.

Jan 19, 2010 | Juki MO-644D Mechanical Sewing Machine

1 Answer

Juki 5555


You probably need to insert a new needle but here is a link that should help you Claven.These things happen to all of us at one time or another

Jan 23, 2009 | Juki MO-655 Mechanical Sewing Machine

Not finding what you are looking for?
Juki MO-644D Mechanical Sewing Machine Logo

410 people viewed this question

Ask a Question

Usually answered in minutes!

Top Juki Sewing Machines Experts

Bargain Box
Bargain Box

Level 3 Expert

1388 Answers

P M Alaniz

Level 1 Expert

12 Answers

SewTechWayne
SewTechWayne

Level 2 Expert

186 Answers

Are you a Juki Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...