Question about Televison & Video

Open Question

Polaroid TLU-01941W 19" LCD TV I can't get any digital channels to tune in, I had them once for about 20 minutes then they disapeared...I can't seem to access the configuration function to re-tune it! Has the digital tuner fried itself?

Posted by on

5 Suggested Answers

  • 579 Answers

SOURCE: Tuning a VCR into a digital tv set

Switch to using the A/V (Audio, Video) connections to watch your vcr

Posted on Dec 29, 2007

HDTV GURU
  • 261 Answers

SOURCE: Digital channels off the air on Sharp LCD Tv

Yes, Go into menu and make sure you have at least rabbit ears hooked up and preferably a HDTV Antenna. If not, a Large paper clip will work in a pinch if you have one, but it won't pick up all channels. Give that a try and then go into the menu under search digital channels then, after you find a few, see what the signal strength is and go from there. Let me know how it works out for you and please give me a good rating. I am trying to do this to make some cash as well. Good day and happy HDTV ING. JAY

Posted on Feb 01, 2008

tvtek
  • 1284 Answers

SOURCE: Digital TV Tuning problem

I would try letting the set autoprogram again.

Posted on Mar 08, 2008

  • 1 Answer

SOURCE: no code for v

THE CODE FOR POLAROID TVS IS 0008 VEN USING V+ REMOTE

Posted on Apr 09, 2008

blueextc3221
  • 15935 Answers

SOURCE: Local channel went digital, lost signal.

You need a digital to analog convertor box to recieve the digital signal.

All UHF+VHF signals will be digital starting in June.

Thanks for using FixYa - a FixYa rating is appreciated.

Posted on Feb 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Just got a 2nd hand TV model CT-90119 and need to know how to tune tv in for Playstation2 and is there an instruction manual available to download for free? Sam


Most likely you need the RF adaptor that the cable from PS2 plugs into before connecting to TV. There is an automatic switch that shifts the display from "TV" to "Game" when the game console is turned on. Tune TV to channel 3 or 4.

May 09, 2009 | Televison & Video

1 Answer

Hitachi T.V. remote CLU3842WL will not change channels.


There are two possibilities: either the channel memory has been lost due to the TV being unplugged for an extended period or the digital tuning system has a defective component. First thing to do is go into the TVs menu system and try to re-scan the channels. You may find that you can change channels after doing this. If its still not changing channel, the digital tuning board will have to replaced.

michtech

Feb 15, 2009 | Hitachi Televison & Video

2 Answers

I have got a polaroid flat screen tv. model no. polaroid TLU 03711C. I have had this tv for less than a year, and it is still under warranty just. however over the last 4 months or so, when i first turn...


I had the same problem - It was due to these two tiny devices called "capacitors" which had blown. I replaced them (it only cost me £1!) and was really easy.
I wrote a guide on how to change the capacitors, there are pictures an d the guide is easy to follow. You can print, download or view the guide here - http://www.scribd.com/doc/13515584/Polaroid-TLU03711C-Replace-Capacitors-Guide

Oct 16, 2008 | Televison & Video

1 Answer

Bought a 22" hd ready polaroid tv & it won't tune in. Channel 4 is the only station thta picks up seemingly..


my son who is better at this sort of thing just mucked around and managed to tune in programs.

thanks,
phil

Sep 12, 2008 | Televison & Video

1 Answer

No code for v + remote for polaroid tv tlu-03711c


THE CODE FOR POLAROID TVS IS 0008 VEN USING V+ REMOTE

Apr 06, 2008 | Televison & Video

1 Answer

Digital TV Tuning problem


I would try letting the set autoprogram again.

Mar 07, 2008 | Televison & Video

2 Answers

Grundig colour tv lost digital channels


I'm sorry, but I have not worked with Grundig TV's, radios yes, TV's no. However, The menu shouldn't be hidden. The first thing I would try would be to UNPLUG the set from the wall, wait about a minute and plug it in again. This action should reboot the micro processor. On some sets, there are two levels of menus, main and advanced. You would want "channel setup" and /or channel scan. You may also look in the back of the manual and see if it list some service dealers that you could call for help. I hope this helps.
Electrode

Mar 03, 2008 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

70943 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

yadayada
yadayada

Level 3 Expert

66126 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...