Question about Curtis DVD6041 System

1 Answer

Surround Sound How do I set up Curtis dvd 6041 home theater to get surround sound out of my tv. I see the curtis has a digital coax output. Is it as simple as hooking that up to my tv digital coax? Or will that hurt it? What do you recomend?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 4 Answers

You will need audio cables to connect the output of the TV to the input of the unit.

Posted on Feb 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Xbox360 not hooking up to Curtis DVD5091 surround sound through optical cable


try running the optical cable from your dvd directly to your tv and then select whichever input (eg HDMI 1/2 etc) you use to play the xbox on..In theory this setup should allow any audio playing on the tv to go through the surround sound..hope it works

Feb 11, 2013 | Curtis DVD5091 Theater System

1 Answer

Show me how to set up my curtis 5091 to my dvd and tv


The speakers should not be a problem. All the sockets are labeled left / center / right / left surround / right surround and subwoofer.
Connect the yellow composite video out to the TV's yellow composite video in . Along with video out of the Curtis you can connect two red and white audio out to the TV's audio in socket.
bobhifi_17.jpg

Mar 15, 2011 | Curtis DVD5091 Theater System

1 Answer

My home theatre was connected successfully playing the cd movie, but after turning off the dvd and go back to watching tv the sorroung system speakers do not give a sound to the television. is it that i...


hi,
select tv input on ur theater system. u can hear audio fro the frond left and right speakers. if u want to hear the audio from the surround speakers, then press the A-MODE button on ur remote to select different type of sound modes. press again and again to select different sound field. select one which suits u.
ok

Dec 27, 2010 | Curtis DVD5091 Theater System

1 Answer

Cannot connect Curtis DVD6091 to 42" plasma tv by digitcal optical or audio leads, works fine on dvd and cds no sound from tv. Have checked settings are both pcm, and have turned off speakers on the...


Speaking direct to the manufacturer it turns out that the intended use for the optical socket is to allow connection to other video devices and not for the connection of other audio signals. In short, you cannot use the optical socket to allow 5.1 surround sound from any other device as it is OUTPUT only.

Seems crazy I know but that's what the manufacturer told me.

Nov 09, 2010 | Curtis DVD6091 Theater System

2 Answers

Curtis dvd 6091


I'm having the same problem and have found the manual to troubleshoot at Curtis's site - http://www.curtisint.com/web/products.asp?brand=CURTIS&subCat=HOMESYSMJR&catName=DVD%20HOME%20SYSTEMS

Jul 18, 2010 | Curtis DVD5091 Theater System

1 Answer

Getting tv in surround


you need to plug rca cables into the audio out of your tv providing it has them then go to the setting menu in the tv go into the sound options and turn on surround sound

Jul 01, 2010 | Curtis DVD5091 Theater System

1 Answer

The home theater system wont read my disc:(


Well from what I have found in trying to get this problem figured out is that it is a common problem with Curtis Home Theatre Systems; not just your model 6041. Here is a POSSIBLE solution:


Q: The screen is blank!
To reset the video output on your DVD, follow these instruction. Connect to standard composite connection (yellow video input on TV and yellow video output on DVD). Remove any DVD's from the unit. Turn the unit off, wait 10 seconds and then turn it on again. Using the remote, press SETUP, then RIGHT ARROW button 4 times. Press Enter. Then DOWN ARROW button 3 times. Press Enter.
That is for your 6041. For what I have discovered elsewhere it may or may Not cure the problem. Give it a try and let me know one way or the other.

Oh, here is a link to the Curtis website Support area: http://www.curtisint.com/support/support.asp?brand=CURTIS .


Nov 29, 2009 | Curtis DVD6041 System

1 Answer

No surround sound through tv


May be you have to set the Pro-logic option soundfield, this will matrix a 5.1 surround sound effect, unless of course you are sending a Dolby Digital 5.1 audio signal from your TV broadcast into the Home theatre system, also have to check the TV audio output to send audio output to a Home theatre system in other than 2 channel stereo.

Feb 09, 2009 | Insignia NS-H2002 Theater System

2 Answers

How do I hook the tv up to the speakers?


we had to hook sound cables from DVD player into digital cable box, not tv and now surround works in tv mode as well as dvd.

Dec 26, 2008 | Curtis DVD5091 Theater System

Not finding what you are looking for?
Curtis DVD6041 System Logo

287 people viewed this question

Ask a Question

Usually answered in minutes!

Top Curtis Home Theater Systems Experts

Electro Med Services...
Electro Med Services...

Level 3 Expert

5653 Answers

Iron
Iron

Level 3 Expert

3018 Answers

kakima

Level 3 Expert

96608 Answers

Are you a Curtis Home Theater System Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...