Question about Whirlpool GS563LXSS - stainless Steel Gas Kitchen Range

2 Answers

I have a Whirlpool GS563LXSS - stainless Steel Gas Kitchen Range. The burners won't light and we have a LOC displayed on the control panel thanks

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Hold the night light button for @ 3 seconds. It works for me.

Posted on Oct 21, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Keep holding the button that says "control lockout" (with the picture of a lock) for something like 10-12 secs (though it says hold for 3 secs). Keep holding while the Diplay panel info (time etc) changes until finally the red LOC disappears. Now the cook top is all set to work. (the loc is a just a safety feature which may get turned on accidentally while cleaning the buttons panel).
If the burners dont ignite immediately, wait for a couple of minutes and try again. It is sure to work.

Posted on Feb 22, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Whirlpool gas range f5 code


F5 is a fulty display control board. Unfortunately there is nothing you can do to fix this problem but to order and replace the display control board.
Here is the board to order.

Dec 02, 2012 | Whirlpool GS563LXSS - stainless Steel Gas...

1 Answer

Display shows: E1, F1, and locked (Model: GS563LXSS) at the same time. How do I clear these conditions?


Hello,

The E1-F1 code is just one error code and it means that the oven control has detected a error within the control itself and the control needs to be replaced. The part number for the control that should be replaced is W10116542 it could be purchased at your local appliance parts store or online at;
searspartsdirect.com
apdepot.com
partselect.com
repairclinic.com
apwagner.com


GENE...OldTech2332

Sep 06, 2011 | Whirlpool GS563LXSS - stainless Steel Gas...

1 Answer

LOC display top burners will not light


Hold the nightlight button for 3 seconds. This was contrary to the instructions in the manual which suggested holding the off/cancel button

Nov 28, 2010 | Whirlpool GS563LXSS - stainless Steel Gas...

1 Answer

Stove top won't light?


Normal 0 MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman";} Hi,

Here is a tip that I wrote to give details about why your cooktop will not spark to light the burners..

Cooktop Range Stove spark ignition does not work

heatman101

Sep 08, 2010 | Whirlpool GS563LXSS - stainless Steel Gas...

1 Answer

Whirlpool GS563LXSS - oven won't light. How do you distinguish between issue being a) spark ignitor, b) spark module control board?


After calling to schedule service, thought to try unplugging, wait 10 seconds, replugging to see if it reset anything.
To my amazement, it reset something and the oven started right up. No service call, no parts replaced, working again!

Jan 11, 2010 | Whirlpool GS563LXSS - stainless Steel Gas...

1 Answer

I have model GS563LXSS...all of a sudden the oven


It is not good to do the self clean. The electronics take a beating. Probably the ignitor went out. The oven gets too hot.

Nov 03, 2009 | Whirlpool GS563LXSS - stainless Steel Gas...

1 Answer

Whirlpool oven doesn't work model gs563lxss


We had those same symptoms with our range out of the box. It was a problem with the PC board and it was fixed under warranty.

May 15, 2008 | Whirlpool GS563LXSS - stainless Steel Gas...

2 Answers

Range goes into lock out mode for no reason


I posted a similar problem earlier today but never saw it come up. Anyway I found the problem for me. My problem was a "LOC" display came up when I plugged the stove in after bringing it home (bought used off craigs list). This made the stove top inoperable, no gas supply.
SOLUTION:
There is a Cooktop Lockout as part of the night light switch which you hold down for 3 seconds to activate or deactivate. This is not the same as the Control Lockout which is next to the switch I am describing. Anyway doing this will make the "LOC" display go away and you will hear the gas valve activate or deactivate respectively.

Jun 14, 2007 | Whirlpool GS563LXSS - stainless Steel Gas...

Not finding what you are looking for?
Whirlpool GS563LXSS - stainless Steel Gas Kitchen Range Logo

932 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Cindy Wells

Level 3 Expert

4800 Answers

Mike Carew

Level 3 Expert

958 Answers

Are you a Whirlpool Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...