Question about Panasonic DVCPro 24M

1 Answer

Panasonic DP801 & RM850 Cannot receive AM Stations

I have a Panasonic DP801 8 CD changer and a RM850 remote controller. The Changer works great, the only problem I have is that I cannot receive any AM stations. Can you help.

Regards

Gordon Glew

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I WOULD THINK YOU WOULD LIKE TO ASSIST YOUR CUSTOMERS WITHOUT A CHARGE, WHO HAVE PURCHASED ONE OF YOUR PRODUCTS, SO IN THE FUTURE THEY WILL REMAIN ONE OF YOUR CUSTOMERS , KNOWING IF THERE IS ANY PROBLEMS OR QUESTIONS ABOUT A PANASONIC PRODUCT IT CAN BE DEALT WITH AS EASILY AS A PHONE CALL , LIKE SO MANY OTHER ELECTRONIC COMPANIES OUT THERE WHO ARE WILLING TO DO SO.......NO, I HAVE NOT THE SOLUTION TO MY PROBLEM.
G.GLEW

Posted on Dec 15, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My sony 3 cd changer audio system un able to open / may be stuck


if it wont eject ,on 99% of cd/dvd players theres a tiny hole big enough just for a paper clip some where near the draw/door mechanism you just find that and insert strong paper-clip /needle,it should go in about 1 inch and make contact with release catch press a little harder it should pop out7_22_2012_3_54_08_pm.gif

Jul 07, 2012 | Sony Blank Media

1 Answer

Hi trying to clear regional code on dvd player panasonic s58 please advise Cheers


Hi there, the problem with this type of dvd player is that the remote has a pause/play combined button. You need to get yourself a generic remote and program it to use the dvd player, make sure it has a seperate play/pause button. When you have this remote use the following code :

Audio, 1, 9, 8, 2, Subtitle, Pause and then 0

Make sure you have the disc tray open at the time. The screen should display "On" if the code worked correctly.

I hope this helps and thank you for using FixYa

Aug 29, 2010 | Panasonic Blank Media

1 Answer

Retune Panasonic SA-EN38DB DAB radio + ipod dock


Original manual found - note the Model No. is listed as SC-EN38DB i.e. complete system (main unit = SA-EN38DB; speakers = SB-EN38; remote control = N2QAYB000245):

"Press and hold (PLAY MODE) until 2DAB AUTO SCAN' appears. When a frequency is tuned by Auto scanning on this unit, the ensemble corresponding to the frequency is displayed for approximately 2 seconds"

Nov 17, 2009 | Panasonic Blank Media

1 Answer

I have a sanyo 3 disc dvd changer. says no play


first of all you need to check your manuel for dvd's that can be played as in burnt. as of right no cd/dvd changers can play dvd that are burnt. cd's can be played if it states on player. only normal cd's and dvd's can be played. also check your disc for marks on them like fingerprints etc. if you want invest in a great player like sony, pioneer, i have no problem with these players.

Jul 26, 2009 | Blank Media

2 Answers

I have a techwood st67 3-disc changer that doesn't always recognize a cd much less actually read it... any ideas?


The laser diodes2.gifwhich read the disc weaken over time and the lens can become dirty.Remove the case and you will see the 4mm dia. lens on the assembly riseup to read the disc when inserted. Eject the disc and lightly wipe thelens clean with a cellulose acetate Q tip or head cleaning cloth withjust a small amount of disc/optic/lens cleaner. Try playing the disc. Ifit will not read any discs then the laser diodes are to weak to read orthere is a malfunction in the digital signal processing2.gif board. Unless it is under warranty, you will need another unit.

Jul 19, 2009 | Blank Media

1 Answer

Non Responsive Buttons


Hello..
Is this system one that has speaker connections?
If so, all the speakers must be connected for it to work right.

Apr 09, 2009 | Panasonic Blank Media

1 Answer

Thanks but i need more help


Don't be panic.
Check the batteries of your remotes control. FIRST
Be sure to aim the control to the sensor of your tv.

Usually you have one remote for your tv and the other to control the cable box or digital box.

You have to set the RMC10 again using the code of your tv Silvania (like the first time)
Then set your tv on channel 3


Another thing, be sure that you are hitting the right buttons.
The control doesn't work if you hit on the top any key instead of cable
What i mean?

The remote has on the top 4 key usually (tv, cable, vcr, aux, etc).
You must hit first cable to set the control to cable

1, Manually turn on the device(TV, VCR, etc.) to be controlled.
2. Press and hold the code search button until the red indicator stays on, then release the code search button.
3. Press and quickly release the desired mode button (TV, VCR, ect.). The red indicator blinks off once.
4. Press the Channel up button repeatedly(up to 300 times) until the device to be controlled changes channel. The red indicator blinks off with each button press. If you accidentally overshoot the code required, press channel down button to backtrack through the library until device changes channel. Pressing Channel up changes direction forward again.
5. Press and release Mute to install code.
1, Manually turn on the device(TV, VCR, etc.) to be controlled.
2. Press and hold the code search button until the red indicator stays on, then release the code search button.
3. Press and quickly release the desired mode button (TV, VCR, ect.). The red indicator blinks off once.
4. Press the Channel up button repeatedly(up to 300 times) until the device to be controlled changes channel. The red indicator blinks off with each button press. If you accidentally overshoot the code required, press channel down button to backtrack through the library until device changes channel. Pressing Channel up changes direction forward again.
5. Press and release Mute to install code.


Don't forget to rate my help!
Thank you for using FIXYA!
Have a great day!
Pablo :-)

Let me know how it is going!

Oct 18, 2008 | Blank Media

1 Answer

Pace on digital terrestrial receiver remote control


some functions only work if you subscribe it i thing haveing VALUE ADDED BASED function.
CHECK WITH YOUR SERVICE PROVIDER.

Sep 19, 2008 | Pace Blank Media

Not finding what you are looking for?
Blank Media Logo

Related Topics:

190 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Blank Media Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

 Grubhead
Grubhead

Level 3 Expert

4593 Answers

Rod
Rod

Level 2 Expert

224 Answers

Are you a Panasonic Blank Media Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...