Question about JVC TH-M505 System

2 Answers

Sound from one speaker but not the other

I have a JVC stereo system #CA-MXC7TN/CA-MXC9S and recently one of my speakers stopped working but the other one works perfectly fine. It is not the speaker since I have tried switching them and they both work well. Has anyone ever encountered this problem and if so what to do? Thanks

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert who has written 50 answers of more than 400 characters.


    An expert who has answered 200 questions.

  • Expert
  • 275 Answers
Re: Sound from one speaker but not the other

Try one small test - Plug in your Stereo Headphones - do both channels work? If yes, then problem is in Headphone jack. If No, then, Nothing you can do, unless you know Solid State electronics Servicing. Definitely looks like a defective Output Amplifier IC . Have it checked professionally.

Posted on Mar 29, 2007

Re: Sound from one speaker but not the other - JVC TH-M505 System Home Theater Systems

May be power ic one channel failed

Posted on Mar 29, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

I have only a speaker to a jvc sp-pwm505 surround sound system. But am looking to power it using something else. Is this possible?

Yes, all speakers operate on the same principle. Though depending on the resistance of the speaker, usually 4 or 8 ohms, it may place too large a load on the source driver. Try it and see.

Nov 25, 2014 | JVC Home Theater Systems

1 Answer

Vibration through speakers on my jvc home cinema system

try tightening the screws on the cabinets or buy a full set of

Wharfedale Modus Cube Main Stereo Speakers to replace the bad ones

Mar 23, 2014 | JVC Home Theater Systems

2 Answers

Getting tv sound from home theater speakers

Connect your sound from the cable box out to the JVC theater audio in jacks. This will give you sound through the speakers.

Jan 29, 2014 | JVC TH-C50 System

2 Answers

Boston stereo base speaker stopped working

Check the wiring to that speaker and then the conections

Jan 13, 2013 | Boston Acoustics Home Theater Systems

1 Answer

Problem with surround sound on JVC Th-C5 sound system

Not sure how you're hooked up or what model TV you're using. If you mean the TV sound through RCA cables is the source and you're wondering why it's not surround. Well, it's not multichannel. Please fill in some details.

Dec 25, 2009 | JVC TH-C5 System

1 Answer

Can not get 3 speakers on my samsung home theater to work!

There are a few settings that will just give you a stereo output. The first one is with the Pro Logic II. If you press the PLII Mode button on the remote it will go through a series of settings from MUSIC ➞ CINEMA ➞ PRO LOGIC ➞ MATRIX ➞STEREO ➞ MUSIC. Pro Logic setting will only produce sound from the front speakers and Stereo from the front speakers and the sub. Put it on Matrix for 5.1 surround sound.
Also for speaker settings follow the instructions below.
Signal outputs and frequency responses from the speakers will automatically be adjusted according to your speaker configuration and whether certain speakers are used or not.
In Stop mode, press the MENU button.
Press the Cursor down button to move to Audio and then press the ENTER button.
In the SPEAKER SETUP, press the ENTER button again.
Press the Cursor button to move to the desired speaker and then press the ENTER button.
For C, SL, and SR, each time the button is pressed, the mode switches alternately as follows : SMALL ➞ NONE.
For L and R, the mode is set to SMALL.
SMALL : Select this when using the speakers.
NONE : Select this when no speaker is connected.
Press the RETURN button to return to the previous level.
Press the EXIT button to exit the setup screen.
It also seems that with this system, if you are on 5.1 surround but your music source is only in stereo, you will only hear stereo.

Nov 20, 2008 | Samsung HT-Z310T Theater System

1 Answer

No sound from speakers.

On some stereo gear the headphone jack interrupts the speaker connection when the headphones are in. you "might" have something broken in the headphone jack which is keeping the speakers from turning on.
Is there a MUTE switch on the unit?
Or an "External speaker off" thingy in the menu?

Sep 07, 2008 | JVC TH-M303 System

1 Answer

No Stereo & center sound together in CD mode or TV mode

Something isn't wired correctly, check you wiring and get back to me.

Jul 15, 2008 | Bose Lifestyle 28 System

1 Answer

Xbox 360 problem

Umm dude this is due to the fact that the Xbox 360 does not transmit 5.1 surround sound through optical leads you have to use standard red/white cables

May 25, 2008 | JVC TH-A35 System

Not finding what you are looking for?
JVC TH-M505 System Logo

Related Topics:

186 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Home Theater Systems Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers


Level 3 Expert

57192 Answers


Level 3 Expert

94198 Answers

Are you a JVC Home Theater System Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides