Question about Sears Craftsman LiftMaster Chamberlain Garage Door Opener Wireless Keypad Model 976LM Security+

1 Answer

Liftmaster 376lm Keypad wont work

Worked just fine until last night and it stopped working, changed the battery this morning and now it just flashes, How do I get it to work again

Posted by on

  • 2 more comments 
  • fourstecks Jan 19, 2009

    I have the same problem, when I enter the code the keypad just flashes over and over.

  • Anonymous Jan 31, 2009

    same problem. The code is still their and still works. take your hand and press hard on the entire keypad, then put in your code. I've been doing this for a week. Must be a bad connection on the board. Need to replace 976lm remote.

  • jellomama Apr 13, 2009

    I have the same problem, but have no access into the garage to reset the learn button. Any other suggestions?

  • marty metzger May 11, 2010

    what flashes. light bulb on motor. light on wall console.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 112 Answers

Reprogram keypad. Press learn button on back of opener, then press in 4-digit code and press and hold enter on keypad. Light on opener will blink.

Posted on Jan 18, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I need a remote keypad for 41a5021-1e lift master. What model will work for this unit


check the liftmaster web-site. also any garage door sites may have parts offerings. google the part number as well.

Nov 05, 2014 | liftmaster Lift Master 377LM 376LM 315 MHz...

1 Answer

How do I check a wireless garage door keypad, to see if it is transmitting?


These remotes don't loose the programming code when a battery goes dead, most likely the remote or the board on the opener went bad, do any other remotes work? You can take the remote to an auto parts store and test it there. (They have a tester for key fobs)

Sep 24, 2014 | Sears Craftsman LiftMaster Chamberlain...

1 Answer

I have a Genie Directlift 2060 garage opener. My wireless keypad has always worked fine until now. I enter the code and nothing happens. I replaced the battery with the same result. I followed the...


Your wireless keypad may be flashing the red light to falsely assure you that it is working when, in fact, it is not. Another possibility is that the receiver has failed.

Oct 21, 2013 | Sears Craftsman LiftMaster Chamberlain...

1 Answer

My wireless keypad stopped working. I replaced the battery. It worked 1x and hasn't worked since. I'm able to program remotes. The keypad is backlit and flashes when I enter the code or try to program it....


I would make sure the battery contacts are clean and not corroded. Otherwise a new keypad is most likely the answer. Just FYI the keypad will still work when the wall control is locked.

Sep 28, 2010 | Sears Craftsman LiftMaster Chamberlain...

1 Answer

My craftsman remote keypad and remote car opener don't work in the morning but work at night. I changed the batteries on both. Did I do something wrong. Ron


You didn't do anything wrong. Electronic components sometime become sensitive to temperature. It may require a new logic board.

Oct 17, 2009 | Sears Craftsman LiftMaster Chamberlain...

2 Answers

Liftmaster 1/3 HP. Remote and wireless keypad stopped working.


Sounds like the reciever for you wireless devices is not working?

Aug 01, 2009 | Sears Craftsman LiftMaster Chamberlain...

1 Answer

Chamberlain liftmaster keypad works when open but not when closed


try new code with 4 new numbers. maybe a key is worn and cold in morning is not helping,

Jan 19, 2009 | Sears Craftsman LiftMaster Chamberlain...

4 Answers

2 different openers stopped working by remote at the same time


Both the older genie and a newer chamberlain (3-4 yrs old) both run on 390Mhz frequency. sounds like you will have to change your receivers on both operators (365LM 315Mhz) then get 3 button remote so you can program both doors on one remote.

Jan 01, 2009 | Sears Craftsman LiftMaster Chamberlain...

Not finding what you are looking for?
Sears Craftsman LiftMaster Chamberlain Garage Door Opener Wireless Keypad Model 976LM Security+ Logo

Related Topics:

636 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sears Garage Doors Experts

Al Clark

Level 2 Expert

290 Answers

Cindy Wells

Level 3 Expert

4761 Answers

Pieter Vleeshouwers

Level 3 Expert

1423 Answers

Are you a Sears Garage Door Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...