Question about Insignia Pilot MP3 Player

1 Answer

I put a vidio on it and it would not play it so i tried to remove

It and it would not remove it so i formated the internal memory and now it wont do anything . the screen lights up very dim and wont do anything else so i need to reset it or reinstall the drivers and software for it could you email me the drivers and software i need thank you. send to : ddhamm13@yahoo.com

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 23 Answers

Go here to download the CD and drivers.

http://www.mininova.org/tor/2099090

Subject: Insignia Pilot Bluetooth MP3 Player Install CD

193 MB Zipped
202+ MB Unzipped

No Virus, please seed
Install programs, Run, This will allow you to create and watch Video's on device
the Insignia Pilot Bluetooth MP3 Player. Install CD that came with device.
No Keys or anything else needed, just edit format, by clicking small pencil
to chg format seems to like WMV ver 9. and 512 Kbps video, and 96 Kbps audio.

GoodLuck !

Posted on Dec 17, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wont play video only plays the audio in videos


check the video codecs reqired by ur device and convert the vidios only in those format..... ur problem is due to the file u r uploading has different picture(videos= picture+audio) codecs than those required by ur device

Jul 20, 2009 | Sony Walkman NWZ-B135 MP3 Player

1 Answer

My sanza isn't reading any songs that i put on there anymore. I tried to delete the songs but it didn't work. so i tried to format it so i can free up all the space but it said format cannot be completed....


Okay are you talking about the internal memory or the SD disc?
If it is internal memory you could try a reset = Press and hold for 20 seconds the ON and PLAY (>||) buttons at the same time.
or
If it is the SD did you upgrade your Sanza to support Slot Radio? Slot radio does not use a file structure supported by Windows computer system.

Jul 13, 2009 | SanDisk Sansa e250 MP3 Player

1 Answer

Clearing internal memory


Remove your external card if you have one....Then try plugging ur device into ur computer using windows 7 then your going to have a pop up like if you pluged a storage card into ur card reader....click open folder then youll see all you internal music...right click and start deleteing..If you want to format go to my computer find ur device right click and on the list and youll find format just click it and it will format ur internal memory...or insert ur card and do the same

May 24, 2009 | RCA Lyra RD1090 MP3 Player

1 Answer

Need a manual or instructions how to operate it


-------------------
experimental status
-------------------
ZEN mozaic player 2 GB
firmware 1.03
ZEN attached to USB 2.0
Windows XP SP2
Message "do not disconnect"
ZEN is not being recognized
Check ZEN memory setting
Memory ZEN is set to 0 in MENU>Etras>removable disk
Memory ZEN should be changed to maximum 1.5 GB
ZEN is recognized now
ZEN is ready to do the format command
ZEN can be written to for a maximum of 0.5 GB [internal memory !]
ALERT ! This 0.5 GB is the internal memory
The files written to the internal memory will be erased after
disconnecting !
-------------
access status
-------------
NO ACCES TO MY ZEN ?
1) Get access to ZEN by setting disk memory to maximum
in MENU>Etras>removable disk
2) ZEN should be recognized now
-------------
format status
-------------
1) FORMAT the disk
After formatting !
SET BACK YOUR disk memory capacity to zero [ 0 ]
for fully recovering the disk capacity
---------------------
files presence status
---------------------
FILES NOT PRESENT AFTER DISCONNECTING ?
SET BACK YOUR disk memory capacity to zero [ 0 ]
- When set to zero you can use the full memory for
writing files to the player !
- When keeping the memory set to maximum you're using
the internal memory and written files are not saved
after disconnecting
--------------------------------
updating + files presence status
--------------------------------
UPDATING FIRMWARE ZEN MOZAIC = MAKING STANDARD MAPS
1) download the firmware that is suited for your computer
Operating System and your type of player from "CREATIVE"
2) Connect player to USB 2.0
and update with the firmware-update
3) Wait until the update is fully completed
4) After the update disconnect the player
5) Connect to USB 2.0 again
6) Check for the presence of the STANDARD MAPS for Music,
Pictures and Video
7) Files can be written into the STANDARD MAPS
8) Written files should be present after disconnecting
9) Files ready for mobile playing on ZEN mozaic now
--------------------------------------------------------
CREATIVE support site for fimware / software / userguide
--------------------------------------------------------
SUPPORT FOR ZEN MOZAIC ON THE INTERNET
http://support.creative.com/Products/ProductDetails.aspx?catID=213&CatName=MP3+Players&subCatID=214&subCatName=ZEN&prodID=17897&prodName=ZEN+Mozaic

May 10, 2009 | Creative Labs Creative Technology Zen MP3...

2 Answers

I put new batteries in my MP3 & it wont work


Try putting them in the write way or try taking them out and then putting them back or reset it after words

Mar 17, 2009 | iLO (2 GB) MP3 Player

1 Answer

Internal memory


i removed the sd slot with a screwdriver then i put it on again, worked for me

Jul 15, 2008 | Motorola Mobility M25 MP3 Player

2 Answers

Yp-u3


THIS FOR SURE HELP!!!!!!!Hi...I find the answer...Push and hold rec button and button for holding...And it will start..if your mp3 (a samsung yp-u3 mp3) says log val=0x10008018 or something, click and hold the record button and once it begins to record, press the back arrow/button (symbol in the top right corner). your mp3 should work (play music and such) now. to fix your mp3 and get rid of that log val message, you need to go to settings, then system, then format. format your mp3. unfortunately this will delete all your songs and files on the mp3, but the mp3 player should be fixed and the log val message wont appear anymore.

hope this helped..

Jul 03, 2008 | Samsung YP-U3 MP3 Player

1 Answer

Music videos


hey, I had the same problem, I went on www.download.com and downloaded an ipod video converter(for free) and it converted the videos into the proper formet and now they play fine :) I have the same problem with them being sorted into movies not music videos but whatever they still play, hope this helps.

Jan 12, 2008 | Apple iPod MA446LL/A MP3 Player

1 Answer

I cant even delete my music or put new music on...


Instead of deleting the songs you may need to format.

If you haven't tryed this follow these simple steps.

To format your device first click on "Start" then click on "My Computer" now look for your mp3 player, if it hasn't been change the names usually called "Removable Disk", once you've found that right-click on it then click on "Format".

Now you've formatted put songs on then try your mp3 player to see if the problems be fixed.

Good luck. Hope my solution was helpful.

Oct 26, 2007 | Creative Labs Muvo V100 MP3 Player

2 Answers

Memory card question


It should read the songs automatically. Once you have inserted the card with MP3 Format or WMA formatted songs it should read it.

Apr 17, 2007 | RCA Lyra RD1072 MP3 Player

Not finding what you are looking for?
Insignia Pilot MP3 Player Logo

193 people viewed this question

Ask a Question

Usually answered in minutes!

Top Insignia MP3 & Digital Media Players Experts

tk007

Level 1 Expert

23 Answers

Sanath Kumar V

Level 3 Expert

684 Answers

Geoff

Level 3 Expert

413 Answers

Are you an Insignia MP3 and Digital Media Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...