Question about PANDIGITAL 7-Inch Digital Photo Frame with 2 Interchangeable Frames (DPF701) Digital Picture Frame
I had loaded picture on the internal memory and the slide show worked fine. Now I have loaded pictures on a 1 Gb SD card but the slide show does not work. Any suggestions?
I don't like pasting information, but this is the link to the manual.
Don't forget to rate my solution, and thanks for coming to FixYa.
Posted on Feb 21, 2009
Go into the folder where the pictures on your memory stick are stored. There should be thumbnails of all of them and you can select anyone with the red border. Select anyone so it shows up in the picture frame. Now press Enter. Five buttons should show up. Press the middle one to start the slide show. Press Esc to stop the slide show. You can also access the tools settings from here to adjust the interval time. Hope this helps.
Posted on Nov 08, 2009
Tips for a great answer:
May 09, 2015 | PANDIGITAL 8.0" Digital Photo Frame...
When you power on the picture frame, a slideshow will automatically display the photos on your memory. (If you have not inserted a memory card yet, the slideshow will display the photos pre-loaded into the internal memory.)
To restart the slideshow, press
ENTER again, or press the Slide Show button on the remote control.
May 05, 2014 | PANDIGITAL 7-Inch Digital Photo Frame with...
Jun 21, 2010 | PANDIGITAL 7" Digital Photo Frame With...
Mar 18, 2010 | PANDIGITAL 7-Inch Digital Photo Frame with...
Dec 06, 2009 | PANDIGITAL (DPF802) Digital Picture Frame
Nov 30, 2008 | PANDIGITAL (DPF802) Digital Picture Frame
Dec 29, 2007 | Tao MUSIC SPECTARE 5.6 DIGITAL PICTURE...
265 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: