I had the same problem. Here's what I think is going on: the camera has a finite set of numbers that it can assign to pictures. If it is set to "continuous," then every picture that you take gets assigned a new number (even after you delete them off the card). To fix this, you need to set it to "renew" the picture numbers. Here's how to do this: Menu --> Setup --> Frame No. --> Renew.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Consider NOT connecting your camera to your computer.
The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.
Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program such as Picasa.
This camera has a frame count capacity far beyond what is normally conceivable at a whopping 999-9999 images so I'm going to assume that the frame counter has been corrupted and given a faults count. This can be reset but first the card needs to be formatted to this camera. I've done a screen shot of the sequence because it's easier for me and will show you were and what functions need to be carried out. Also this count can be upset by opening the battery door or removing the memory card while the camera is still in the power on position hope this solves your problem. Screen Shot(s)
You need to reset the file-numbering.
Turn mode-dial to Set and turn on the camera. Select Frame No. from the setup menu. Switch Frame No. to Renew. Press OK. Format the card (also from the Setup Menu) After formatting, select Frame No. againg and switch to Cont. File numbers will now start from 100.0001 again
Clean your memory card. Format it. Try to use it again. If the problem persist try to use a different card. If the problem is solved then I think it is time to change your old card. After all these. If it is necessary feel free to ask a new question.
Save all pictures to your computer. Turn camera on, press the menu/ok button, select Setup, press ok. select Frame No., change Frame No. to Renew, press ok. Leave Setup. Press the menu/ok button, select Setup, press ok again. Select Format, press ok / ok until the card is formatted. Now the counter should start over with 100.0001 again. Set Frame No. back to Cont. to avoid to many images with the same filename.
Try going in to the "setup" menu and change the frame numbering from "continuous" to "renew", if it is not already done. Sounds like you are on the continuous setting which keeps adding numbers, even though you've erased many. Going to renew starts the numbering over so it keeps reusing previous numbers.
try emptying the memory card & phone memory then give try ... if same problem persists then may the software of the camera may be corrupted .... you give for installing the software in the show room where you purchased or ur model named show room...