Question about JVC AV-32F703 32" TV

Open Question

36" d-series jvc tv

My tv ,goes to a split screen when I use the green ,blue,and red cables,for HD .Ive been trying to use my x-box cables works but only in split screen almost seems like I need to use a v hold,If there was one anymore.

Posted by on

4 Suggested Answers

Benimur
  • 6966 Answers

SOURCE: JVC 36" TV will not power on and has a blinking power light...

Hi and welcome to FixYa,

Almost always, when an electronic device/equipment fails when powered with and by a generator, it is the power supply unit (PSU). The PSU circuitry expects a fairly constant/stable power source (120 or 220). The output of the generator tends to fluctuate especially under varying electrical load. Additionally, the AC frequency (60Hz) of the generator's output also tend to vary which most PSUs don't like. A noteworthy point to consider is that the generator is floating electrically, its output has no reference to earth/ground.

If you are considering a DIY (do-it-yourself), foremost to inspect would be the PSU particularly the regulator transistor and determine if it outputs +5 and ~+135 VDC. Another to check would be the HOT (horizontal output transistor). If when the TV was used powered by a generator, there was considerable vertical rolling, the vertical deflection IC would also be a suspect.

A friendly reminder, exercise caution when repairing TVs. It stores up EHV (extremely high voltage). It would be to your advantage to reference a service manual (JVC AV-36D303) or at the very least a schematic diagram with voltage readings.

Good luck and Thank you for using FixYa.

Posted on Jan 05, 2009

  • 1 Answer

SOURCE: my 36 inch jvc 4:3 tv has a black box covering

Well this happened for my tv aswell its usually a closed captioning setting if u press ur closed captioning button a few times it will go back to normal

Posted on Oct 05, 2009

  • 541 Answers

SOURCE: I have a JVC D-Series tV 32 in that my little girl

The set has been put into the "text" mode. In the closed caption portion of the setup menu there is a setting for text. Turn it off.

Posted on Oct 21, 2009

  • 1214 Answers

SOURCE: I have a black box on the screen i see part of the

Turn off PIP or closed captioning.

Posted on Dec 18, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 6 year old(nov 04) Sony KV-30HS420 that turns off all by itself. The screen goes to green and the picture fades to black. The sound will keep playing for a few seconds then the TV will turn itself...


If the screen goes rather bright green it is one of two things:

1. It is possible it is a shorted green gun in the picture tube, there are three of them, red, green and blue guns in neck of the tube.

2. The other possible reason is there is a problem on the small circuit board at the end of the picture tube, this model should use three IC chips, one for each red, green and blue.

Being intermittent makes it hard to tell but ask the shop if they tried the self check this set should have. With the set turned off use the original Sony remote and hit Display, 5, vol down, and power.

If the set has a self check (it should) a box will appear on the screen with up to five items with a zero to the right of each, items will be like AKB, OVP, etc, and if any have something other than a zero to the right it pinpoints what happened.

Sets with this feature record each event where something goes wrong, ANYTHING other than a 0 indicates what failure was detected.

If I was to make a guess there will be a number next to AKB, which is Anti-Kine Bias, this means the picture tube or something on the board at the end of it drew too much current and the set's shut down circuit turned the set off.

I actually fixed one of these where both the blue and red IC chips on that board were bad, needless to say, I replaced all three of them.

Any good shop would know about the self check and even if the set did not shut down in the shop the self check would point to the area where the problem is.

Let me know if you need more help or find a error code.


REGARDS, SD TECH

Dec 01, 2010 | Sony FD Trinitron WEGA KV-30HS420 30" TV

1 Answer

My screen has lost any red toning and is just green/blue colour?


On your component cable (GREEN/BLUE/RED) check the connector for the RED on on both the TV and the device it is connected to. Also check the the RED for the VIDEO and the RED for the AUDIO are not switched on both the TV and the device as well.

Good Luck...

Feb 24, 2010 | Sony FD Trinitron KD-36XS955 36" TV

1 Answer

After having my dish network upgraded to HD and installed, i notice on my tv now that the green and red colors are not there, predominant on channels like ESPN that use these colors most. I._E.: football...


Sounds like one of the cables got plugged in wrong.

Look at the back of the HD box and there should be a cable with 5 ends on it (Green,Blue,Red, White and Red).

Often times a flashlight can help make sure you see the colors clearly.

The Green,Blue and one of the Reds is for video. The White and other red are for Audio.

When you unplug the connector the connection it is attached to is also colored. Check to make sure the colors on the cord match the color they are connected to at the box.
The most common mistakes connecting these cables are:
1) Crossing the Green and the Blue cables.
2) Connecting the Red Audio cable to the Red Video connection.

If all of the connections match the correct colors find the same cable where it plugs into the back of the TV and check these connections that they are correct.

When you find and move the cable to the correct connection this should clear up your color and you can begin to enjoy your new toys....

Good Luck....


Jan 15, 2010 | Panasonic CT-34WX54 34" TV

1 Answer

NO CABLE CONNECTION WORKS.


Not at all sure so this might tick you off but how many coax connectors on back of set is there are a red and green one plug into the red one then make sure that in your menu settings you have your TV set to that input connector not video1, HD, sat etc.. take your time you are probably missing something.

Jan 28, 2009 | JVC AV27F476 27" TV

1 Answer

JVC LT 43E488 LCD HD TV cable box doesn't get local channels


boomergal, do you have satelite cable or directv or dish?

Dec 12, 2008 | JVC AV-36D303 36" TV

1 Answer

KP-53HS10 Real HD


On this TV there is only one input for any HD resolution. Input # 5 is the component input i.e. red/green/blue cable. Just get the correct cable and match colors from cable box to TV this will allow the TV to display 1080i resolution ( only one this TV supports ). FYI you will also have to connect the red and white cables to the appropriate inputs to get any sound because red/green/blue connectors are just for video display not sound. Once your connected you'll be able to access video # 5 be sure to set your cable box to 1080i resolution also. I hope this helps later J.

Dec 02, 2008 | Sony KP-53HS10 TV

2 Answers

Just need to know where to plug in the red, green and blue cords


The red-blue-green outputs of the cable box are COMPONENT video, and the yellow-white-red inputs on the tv are COMPOSITE video. Although the words sound almost alike and the connectors look similar, they are incompatible signals. You'll need to change either the cable box or the tv so they match. Maybe this would be a good way to rationalize getting that new home theater system! Or maybe call your tv cable company and ask for a different box with composite video output. Once the cable box matches the tv, you don't necessarily need to change the cables. If the connectors fit, go ahead and use the cables you have.

Jul 15, 2008 | Quasar SP-3235 32" TV

1 Answer

HDTV problem


You should test the TV set using a known good source such as a DVD player with RGB outputs to drive the set. If it is good, then this rules out the TV set from being at fault.

From experience, many times I found compatiblity issues between computers and TV sets. The computer's resolution and refresh rate must be set exactly to the TV's capability.


Jerry G.

Jun 26, 2008 | Sony FD Trinitron WEGA KV-36HS500 36" TV

1 Answer

Hd dvr


if you are connecting the dvr via component video cables select the output to 480i and not 480p or other higher formats.the tv cannot support anything higher than 480i. or try using composite video hookup instead.

Jan 29, 2008 | JVC AV-36320 36" TV

1 Answer

Blue Screen


I don't have a solution, but wanting to know if you ever resolved your problem? I'm having the same issue with my JVC 32" model # AV-32D500.

thanks

Jan 12, 2008 | JVC AV-32D500 32" TV

Not finding what you are looking for?
JVC AV-32F703 32" TV Logo

Related Topics:

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

68301 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Are you a JVC Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...