Question about SMC Barricade g SMCWBR14T-G Wireless Router (SMCWBR14TG)

2 Answers

Cannot reset to factory default

Hi I have forgotten the ip and password for my smcwbr14t-g and the unit will not reset to factory defaults. I have followed the instruction guide and pressed the rest switch on the back, but it wont reset. Any1 have any idea's. Thanks for the help in advance

Posted by on

  • Anonymous Mar 27, 2014

    i just bought this switch 10gbe and i dont have the password, i need to reset to factory defaults and even reading the manual cant find information about that, please help me

×

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 113 Answers

Try hard reset Hold the reset button for a minute and while you are holding the button, also unplug the power cable from the back every 15 seconds. So, you would unplug the power 3 times and make sure, dont release the reset button even when the power is unplugged. This works for most of the SOHO routers. cheers

Posted on Mar 14, 2007

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The default pasword is SMCADMIN

Posted on Mar 19, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Forgot my password for wrt120n


Looking for the Linksys WRT120N default password? You probably have little reason to access your router on a regular basis so don't feel too bad if you've forgotten the WRT120N default password.

However, when you're troubleshooting a network problem and need to get in to the device, the WRT120N default password suddenly becomes very important.

For most versions of the Linksys WRT120N, the default password is admin. As with most passwords, the WRT120N default password is case sensitive.

In addition to the WRT120N default password, you can also see the WRT120N default username and WRT120N default IP address in the table below.

Note: The Linksys WRT120N default password may be different for certain hardware orfirmware versions.

If I have that information, I'll include the exact WRT120N version number along with the correct default password. You can usually find your Linksys WRT120N version number on the bottom of the router.

Be sure to change the default router password on your WRT120N to something more secure as soon as you're in. Then use a free password manager so you'll never forget your new WRT120N password.
Help! The WRT120N Default Password Doesn't Work!

At some point during the life of your particular Cisco Linksys WRT120N, the default password, username, and/or IP address might have been changed.

In most cases, if the Linksys WRT120N default IP address has been changed, the new IP address for the WRT120N will be the same as the default gateway IP address configured for your network connection.

See How To Find the Default Gateway IP Address for help.

In situations where the WRT120N default password or WRT120N default username has changed, you'll need to reset the Linksys WRT120N to factory defaults. You can usually do that via a special button or sequence of actions.

The WRT120N manual will have specific directions for performing a factory default reset. You can download the manual for the WRT120N from Linksys Support.

Please let me know if any of the WRT120N default login data below needs updated. For other questions about the WRT120N default information on this page, see my Default Password FAQ.
WRT120N Default Password & Other Default Login DataVersionDefault UsernameDefault PasswordDefault IPPrivilegesAll[none]admin192.168.1.1Administrator

Jan 13, 2012 | D-Link 802.11g Wireless Router WBR-1310...

1 Answer

I have an Belkin router,#9ab8c1. I have forgotten the password inorder to download to my Kindle.How do I reset the password ?


You can reset the device to the default factory settings by holding down the reset button for a determined period of time, for Belkin it usually is 7 seconds and default password is blank.
Now you can log into the router with the default IP is 192.168.2.1 and changed the username or password on the wireless settings.

May 06, 2011 | Computers & Internet

1 Answer

I need my netgear password


Most of the NETGEAR devices, except ReadyNAS products and Fully Managed switches, have the following default username and password:
  • Username = admin
  • Password = password
    • For older devices, password = 1234
If you have changed the default password and have forgotten it, you will need to reset the NETGEAR device to factory default settings in order to use the default username and password. Click here to learn how to reset the NETGEAR device to factory default settings. Please note: restoring a device to its factory default settings will erase any changes you have saved to the device.

Reset and Restore the NETGEAR device to Factory Default Settings

Symptoms:

  • Forgotten/lost password to log into the NETGEAR device
  • Cannot access the NETGEAR device web interface
Click here for video walk through example of how to reset the WGR614v9 router.
video-icon2.jpg

Resolution:

If you have changed the default password and have forgotten the password, you may need to reset the NETGEAR device to factory default settings.

When a NETGEAR device resets, it goes back to the state when it was new - all information that was entered by hand is lost! Examples include critical things you need to get online, such as ISP username, ISP password, IP addresses, wireless security keys, and ports and services that were opened. It all needs to be re-entered.
So, have your ISP information before resetting the router.
Naturally, if you moved to a new city, or if you bought a used router, the old information in the router may not be of use to you. Contact your ISP if you can't connect any computer directly to the Internet. Then, if there is a connection problem when the router is added, see No Internet Access Through the Router
Reset for most routers with a reset button on the rear panel
Write down configuration information such as IP addresses, security keys, opened ports and services, etc., that you modified. (The default username is admin and the password is either password or 1234. Try these before resetting the router.)
  1. Press the reset button on the back until the test light blinks. This takes about 10 seconds. (To avoid accidental resets, the small button is recessed. Use a pen or paperclip to access it.)
  2. Release the button.
  3. Wait for the router to reboot.
  4. Log in with the default password. If the router configuration was not cleared, try these additional steps AFTER the router has finished rebooting.
  5. Unplug the router's power.
  6. Press and hold the reset button. While the button is held down, reconnect router's power.
  7. Continue to hold the reset button for 20 seconds after reconnecting the power.
  8. Wait for the router to reboot.
  9. Log in with the default password.
For DGN2000 / DG834Gv5 Routers
To restore the factory default configuration settings when you do not know the login password or IP address, press both the Wireless button and WPS button on the side of the modem router for 5 seconds.
For FR314, FR318, and FV318
These routers require reloading the firmware in order to recover from a lost password. Download the most recent firmware from NETGEAR's Web site before proceeding. Follow the instructions in the manual.
For routers with a 9-pin manager port on the rear panel: RT314, RT311, RM356, RT328, RT338, RH340, and RH348
See Updating Router Firmware That Uses a Manager Port.

Here is a small video that shows you how:

http://kbserver.netgear.com/media/flash/training/Troubleshooting/NG_WGR614V9Router_TS_LostPassword.html

Good luck.

Mar 10, 2011 | NetGear WNA1100 Wireless-N 150 USB Adapter...

2 Answers

Forgot my password and can't log on with another pc


Unfortunately, there is no way to recover a lost or forgotten password from a router or access point; you will need to reset the device to factory defaults. However, once the device is reset to factory defaults, you can use the default username ("admin") and password (either "password" or "1234" depending on your router) to reconfigure your router settings. if there is a small hole in the front or back of the router push a hair pin in to reset to factory settings Hope this helps don't forget to vote

Feb 26, 2011 | NetGear WGR614 Wireless Router

2 Answers

I forgot my Password for NETGear WGT624 Please help


Unfortunately, there is no way to recover a lost or forgotten password from a router or access point; you will need to reset the device to factory defaults. However, once the device is reset to factory defaults, you can use the default username ("admin") and password (either "password" or "1234" depending on your router) to reconfigure your router settings.

or

if there is a small hole in the front or back of the router push a hair pin in to reset to factory settings

hope this helps

Jan 17, 2011 | NetGear WGT624 Wireless Router

1 Answer

How can i reset into factory default my ip camera? Username and Password had forgotten.


Push the blue Veo button on the front of the camera to turn it "OFF". Wait a minute and push it again to turn it "ON". This will reset the camera to the default settings: user; admin; password: password.

Aug 10, 2010 | Veo Observer Network Camera

2 Answers

Picked up a Compex NetPassage 27G at a yard sale and cant access it. Does it have a default username and password?


Hi

start by trying these:

Default IP for all Compex's Routers/ APs/ Client Adapters: 192.168.168.1 Default IP for all Compex's Modems: 192.168.1.1 Default IP for all Compex's Switches: 192.168.100.128 Default Password for all Compex's products: Password Default User ID for Compex's modem: Admin
alternatively most router will have a reset button that's usually behind a little hole in the back or at the bottom of the unit. inspect the device carefully and introduce something sharp (that won't break) through that hole while the unit is powered and press for 30 to 60 seconds, this is usually how devices are brought back to factory defaults. if this does not work it's like the device is defective and you may want to get your money back!

hope that helps!

Apr 19, 2010 | Compex NetPassage 27G Wireless Router...

2 Answers

If you have forgotten your password to get into you wireless network, is ther a way to recover it or reset the router all together?


Yes Press the reset button in with a paperclip, toothpick, pen point etc and hold it in for 15 secs that will restore everything to factory default. Here is the owners manual if you need any more help

ftp://ftp.dlink.com/Gateway/wbr2310/Manual/wbr2310_manual_10.zip

Oct 10, 2009 | D-Link RangeBooster G WBR-2310 Wireless...

2 Answers

Forgot my password


Hi,

Most of the NETGEAR devices have the following default username and password except ReadyNAS products and Fully Managed switches:
  • Username is always admin
  • Password is password or (for older devices) 1234
If you have changed the default password and have forgotten the password, you may need to reset the NETGEAR device to factory default settings.

Write down configuration information such as IP addresses, security keys, opened ports and services, etc., that you modified. (The default username is admin and the password is either password or 1234. Try these before resetting the router.)
  1. Press the reset button on the back until the test light blinks. This takes about 10 seconds. (To avoid accidental resets, the small button is recessed. Use a pen or paperclip to access it.)
  2. Release the button.
  3. Wait for the router to reboot.
  4. Log in with the default password. If the router configuration was not cleared, try these additional steps AFTER the router has finished rebooting.
  5. Unplug the router's power.
  6. Press and hold the reset button. While the button is held down, reconnect router's power.
  7. Continue to hold the reset button for 20 seconds after reconnecting the power.
  8. Wait for the router to reboot.
  9. Log in with the default password.
Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Sep 26, 2009 | NetGear RangeMax WPN824 Router

Not finding what you are looking for?
SMC Barricade g SMCWBR14T-G Wireless Router (SMCWBR14TG) Logo

2,023 people viewed this question

Ask a Question

Usually answered in minutes!

Top SMC Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2263 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Michael Galve
Michael Galve

Level 3 Expert

1269 Answers

Are you a SMC Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...