Question about Motorola Mobility HS850 Consumer Headset

2 Answers

Power up cant seem to turn my aoem gw-bt-002 device on havce tried to keep both the volume buttons for more than 5 seconds still nothing HELP

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 827 Answers

Follow the steps below:
• Setting the headset into pairing mode
1) Ensure the headset is fully charged
2) The headset must be switch off
3) Press and hold the on button for +- 8 seconds until the light flashes red-blue
4) The headset is now in pairing mode
• Searching for the headset on the phone
1) Go to “settings” or “connections”
2) Select Bluetooth, then options
3) Select Devices and click add
4) The phone should search for any available Bluetooth devices and display what was found
5) Select the AOEM device and click add
6) You will be required to enter in a pass code which is standard ‘0000’
7) If successful then the headset will start flashing BLUE every few seconds.
8) If it’s a Samsung or Nokia phone you will need to “AUTHORIZE” headset on the device.
• The headset is now paired with the phone

Hope this helps
Season's Greetings from Fixya!

Chris (ziraffa)

Posted on Dec 22, 2008

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Hi,
I posted the manual to this headset here
http://www.fixya.com/support/t526500-cannot_pair_aoem_bluetooth_headset_lg

Posted on May 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to put peltor bluetooth into pairing mode


Normally Peltor headsets work as follows:

1.) Turn the device off.
2.) Once off, hold the on/off/mode button for 5 seconds until you hear a voice say "pairing mode"
3.) Make sure bluetooth is active on your device and search for the Peltor headset, once you find it select it.
4.) When prompted for a pairing key use 0000
that is 4 zeros.
5.) Headset should say pairing complete.

As with moth bluetooth devices remember this muse bt done within a normal amount of time so have your device ready to search by time you put headset in pairing mode will help.

Dec 22, 2012 | Peltor MT53H7BWS2 Bluetooth Headset

1 Answer

Need operating instructions for Jabra BT 2080 headset


ok i hope that you are trying to connect the bt device to a phone or game system or computer,the first thing you need to do is turn the power on to what you are connecting the blue tooth device to.your phone computer or game system,next you will have to put your blue tooth device into discovery mode,now most manufactures of blue tooth devices use the power button for this feature,when you turn the power on to your device keep holding down the power button for 6 to 10 seconds this will put your device into discovery mode,usually a light will remain on,then you can search or add new device from what it is you are connecting to,it will ask you for a pin or pairing code,now most manufactures of blue tooth devices use a factory 4 digit pin pairing code,they are as follows,0000,1234,9999,or 1111 enter the code and your device should pair and work with what it is you are pairring it to .i hope this helps

Feb 26, 2011 | Jabra BT2080 Bluetooth Headset

1 Answer

How you play music on jabara bt 2050 0n phone


first you have to pair your blue tooth device to your phone,first you turn the bt power to on on your phone menu,next you have to put your blue tooth device headphones into discovery mode,now most bt manufactures use the power button for this feature,by holding the power button down for 6 to 10 seconds when you turn the bt device on it usually puts the bt intodiscovery mode.a solid light usually remains on on your blue tooth device,then you can search or add new device from your phone menu.once they have paired or recognized you will need a pin pairing code.Most manufactures of blue tooth devices use a factory 4 digit pin pairing code ,they are as follows0000,1234,9999,or1111 i hope this helps

Feb 25, 2011 | Samsung Headsets

1 Answer

Pairing with Nokia N95


hi,
I posted the manual to this headset here
http://www.fixya.com/support/t526500-cannot_pair_aoem_bluetooth_headset_lg

Jan 29, 2009 | OEM Systems Bluetooth Headsets - Model...

12 Answers

CANNOT PAIR AOEM BLUETOOTH HEADSET TO LG SHINE KE970 MOBILE PHONE


The mamual says to hold the - and + volume keys at the same time for approx. 2 seconds till the light starts to flash green and red. The pairing code is 1234

Apr 19, 2008 | Headsets

4 Answers

CANNOT PAIR AOEM BLUETOOTH HEADSET TO LG SHINE KE970 MOBILE PHONE


Push and hold both vol(+) and vol (-) at the same time for approx 2 secs. The headset will falsh green and red lights. Get your phone to search for bluetooth devices. It should find the headset. Enter pairing code 1234 in phone. Done

Mar 31, 2008 | OEM Systems Bluetooth Headsets - Model...

3 Answers

Bluetooth to mobile pairing


Push and hold both vol(+) and vol (-) at the same time for approx 2 secs. The headset will falsh green and red lights. Get your phone to search for bluetooth devices. It should find the headset. Enter pairing code 1234 in phone. Done

Jan 05, 2008 | OEM Systems Bluetooth Headsets - Model...

9 Answers

New bluetooth earpiece, no instructions


Push and hold both vol(+) and vol (-) at the same time for approx 2 secs. The headset will falsh green and red lights. Get your phone to search for bluetooth devices. It should find the headset. Enter pairing code 1234 in phone. Done.

Jan 05, 2008 | OEM Systems Bluetooth Headsets - Model...

1 Answer

No sound


Had the same problem with the BT250v 'connected' to my Nokia 6021. When connected to my notebook, the 250 did produce sound, so decided the Nokia was the problem. Fixed the problem by doing a full reboot of the phone like this:

 

Jabra: Turn off the 250

Phone: Delete the BT connection to the Jabra (in BT settings)

Phone: Switch off BT

Phone: Turned off the phone (I've even removed the battery)

Phone: Turned on the phone

Phone: Switch on BT

Jabra: Turn on the 250 for detection

Phone: Look for audio devices

Phone: Connect to Jabra

 

Problem fixed!

Sep 02, 2007 | Jabra BT250 Consumer Headset

Not finding what you are looking for?
Motorola Mobility HS850 Consumer Headset Logo

325 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorola Mobility Headsets Experts

Coss

Level 3 Expert

1043 Answers

Brad Brown

Level 3 Expert

13561 Answers

Danny Kuhlmann

Level 3 Expert

1442 Answers

Are you a Motorola Mobility Headset Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...