Question about Dell W2600 26 in. LCD Television

1 Answer

Dell no sound

1 week ago one speaker makes static noise...I disconnected the sick speaker and kept on using only one.....but today number 2 speaker did the same thing.So now I watch tv on Dell 3201 with volume from an old tv I kept.
Anything to do before sending to repair man.
My tv is 18 months old
Tks
my w2600 speaks make a sound from the speakers like they're going out...or like an antenna is not connected properly...it starts out of the blue, and stops when it wants..while its going, I can barely hear the voices on the tv, and sometimes it drowns the voices out all together..I wont be buying another Dell product...their customer service is a joke..and my warranty went out about two months ago...does anyone know if there's a way to turn the speakers off?

Posted by on

  • Anonymous Mar 28, 2009

    I have had this tv for about two years, using it as a computer monitor/TV and it has been great until I moved across the country.  I boxed it up well for the move but now that I have it set up again I have no sound from the tv.  The speakers are hooked up correctly.  When I first turned it on I got some static noise from both speakers and then that stopped and there is no sound at all.  I have not tried to remove the back to see if it has a sound card like a computer, I was wondering if during the move something could have been jarred loose and simply needs to be pushed back in place.  Probably not that simple.

  • Durteecreole May 23, 2009

    I have the same tv. I still have sound for now, but the static noise is so annoying, and it starts when it wants, and stops when it wants. Lately its been lasting longer and longer. I want to disconnect the speaker but dont know how. It's only in one speaker, for now. When it starts sometimes it low, and I can barely hear, and sometimes it's loud, and that's all I can hear..My tv is 2 years old. I will never buy another TV from Dell.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I also have Dell W2600 TV and have sound problems

Posted on Jan 17, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

EMERSON 55 INCH TV MODEL: LF551EM5 SERIAL: DS2A1433113216


Sounds like The main power supply regulator section circuit fault. Either it will be a separate board, or the part of main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts. http://electro-medical.blogspot.com/
It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.

Jan 10, 2017 | Emerson Televison & Video

1 Answer

I have a lg tv 60 inch tv ln5600 when powering on red stand by light blinks 3 time then no light pic or sound not backlight and no image when using flashlight treid replacing power board does same


Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electro-medical.blogspot.com/

Jan 08, 2017 | LG Televison & Video

1 Answer

How do I determine if it a power failure or if it is a faulty SC board (TNPA5335)?


That does nost sound normal. I would take a look at the output of the power supply. Look at your electrolytic capacitors on the power supply board. Do they look like the top of them has popped up? If so you can get replacement capacitor kits from www.lcdalternatives.com

Jul 09, 2014 | Televison & Video

1 Answer

When CRT JVC TV is first turned on, the image looks shrunken and warped, eventually, the image looks fine. What to fix?


SMPS fault. Check and replace damaged component/s at it main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" or "Magazine" will make surf easy. Surf the site with patience. Pull up older posts. Do a search by type in the brand name of your device at its search box.
http://electronicshelponline.blogspot.com/
Check all the electrolytic capacitors.

May 26, 2014 | Televison & Video

1 Answer

I have a toshiba LED TV Model 40PB200, i bought it two months now. Recently, the audio in port started producing a sound as if microphone is on and the VGA for computer flickers when i connect a laptop on...


One thing is that unless it is usb you should always have the devices powered DOWN before connecting them via" wire electric data cables". it only takes 3 static volts of electricity to damage a circuit board. when you zap you buddy when you wear sox its 20 to 30,000 volts of static electricity so 3 volts would not be known let alone felt or seen. Power down and you will be well not you .

Sep 30, 2013 | Televison & Video

1 Answer

Would like to know the codes for a LG tv, Sony tv, and a TOSHIBA DVD ?


How to Program


Remotes With SET Button
1. Choose and press a device key i.e TV. LED will flash once.
2. Press "SET" Hold until the LED Lights up.
3. Enter the 4-digit Device code (refer code list).
4. The LED will flash once as each number is programmed at the end of the 4 digit the LED will turn off immediately if correct. If the LED flashes then something went wrong in the process. If the first code does not work then repeat the process with the next.
5. Important - Some brands use other manufacturers to make their devices if the codes available do not work the try the MAGIC search function.


Remotes Without SET Button
1. Choose and press a device key i.e TV. LED will flash once.
2. Press and hold BOTH the CHANNEL UP AND VOLUME DOWN button until the LED Lights up.
3. Enter the 4-digit Device code (refer code list).
4. The LED will flash once as each number is programmed, at the end of the 4th digit the LED will turn off immediately if correct. If the LED flashes then something went wrong in the process. If the first code does not work then repeat the process with the next.
5. Important - Some brands use other manufacturers to make their devices if the codes available do not work the try the MAGIC search function.


MAGIC SEARCH FUNCTION
1. The magic search function enables you to scroll through the entire code list one by one by pushing the on/off button. Each time you push the on/off button the remote automatically switches to the next code in the list and sends a signal to the device you have chosen.
2. Choose and press a device key i.e TV. LED will flash once.
3. Press and hold the SET button or if no SET button then hold BOTH the CHANNEL UP AND VOLUME DOWN button until the LED Lights up.
4. Enter the 4-digit Device code (refer MAGIC list) i.e TV is 0001.
5. The LED will flash once as each number is programmed at the end of the 4 digit the LED will turn off immediately if correct. If the LED flashes then something went wrong in the process.
6. Start scrolling by pushing the ON/OFF button as soon as your TV or Chosen device turns OFF lock the code in by pushing the DEVICE key again.

Mar 27, 2013 | Televison & Video

3 Answers

Where can I purchase the Audio Video Connection for my dvd player I want to hook it up to my TV but can't find the correct cable Thank you Sandy


For the COBY TF-DVD7500, the video is carried on a single RCA plug cable. You can make due with a composite video cable (with three RCA plugs on each end) or get an RCA cable. The audio output can either be digital audio (which uses a special coax cable) or a headphone connector (analog audio).I believe the headphone jack is a 3.5 mm connector. If you use a composite video cable to your TV, you can connect the red and white plugs to an adapter (3.5 mm M to 2 RCA F). Then the TV speakers will get the audio track; otherwise you can use the DVD player speakers or the digital audio out.

I hope this helps.

Cindy Wells

Jan 24, 2011 | Coby TF-DVD7500 Portable DVD Player with...

2 Answers

Not enough volume forget about using it in the car---impossible. Can anything be done to improve


I assume you're listening without headphones since I think those would be loud enough. If you don't want to use headphones, purchase a speaker case to connect to the player. It will amplify the sound. We also use it to listen to shows on the computer. This is the one we have http://www.amazon.com/CD-Case-with-Built-in-Speakers/dp/B0009824MK/ref=sr_1_2?ie=UTF8&s=electronics&qid=1256616442&sr=8-2

Oct 11, 2009 | Zenith DVP615 Portable DVD Player

Not finding what you are looking for?
Dell W2600 26 in. LCD Television Logo

Related Topics:

303 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dell Televison & Video Experts

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1646 Answers

Jaime Hernandez

Level 3 Expert

2294 Answers

CoppellTVRepair.com

Level 3 Expert

749 Answers

Are you a Dell Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...