Question about HP PC Desktops

1 Answer

Unable to print a ducument, the ducumentget stored as pending peint, it all began with jamed paper I cleared the paper problem. the print cartridges are are OK. Thank you Irma Rasmussen

Posted by on

  • rasmusseni Dec 17, 2008

    Thank you for your expertise assistens, the printer is now working well.

    Than You Irma Rasmussen

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 111 Answers

Go to Control Panel -> Printer and Faxes, then open the printer. Right click on your printer, then turn off "Pause Printing" or "Use Printer Offline".
If still not working, restart Printer Spooler service. You can access it from Control Panel: Administrative Tools: Services.

Posted on Dec 14, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Unable to printing, pending error while give the print


check if software of the printer is already installed
check if printer is also connected to pc either wireless,wired ethernet or usb cables.

Mar 28, 2011 | PC Desktops

4 Answers

My dell dimension 2400 series computer has lost comms with the local dell AIO A920 printer. Connections seem to be good. It seems a print job has got stuck somewhere. HELP! AJCook


how your printer icon is looking on control panel, if dim, it means it is not detecting , if normal it means detecting then,
go to control panel open printers, then open your printer, cancel all the documents, then send a print command and check

Nov 01, 2008 | PC Desktops

Tip

How to restore your inkjet printer so it prints just like new!


Inkjet printers all operate the same basic way. There are differences but the basics are the same for any inkjet devices. Eventually a buildup occurs enough that your printer doesn't print. Cleaning cycles use more and since inkjet ink is worth about $8000 a gallon, this is a expensive way to clean something.

So what can we do to clean this just a bit cheaper? We need to find a suitable solvent that will dissolve these deposits without harming the print head. And the one that works great and is dirt cheap is good old household white vinegar. Next we want to get some lint free (preferred but not critical) paper towels. And a clean clear table top to work. You may want to put down some newspaper. This isn't that messy to do but it can get the odd bit of dissolved ink on things.

Now we take the printer and remove the paper and the ink cartridges and set aside. The print head is a small stamp sized thing on the bottom of the cartridge holder. Take about 1/3 of a sheet of paper towel and wet it with vinegar. Next you want to get the wetted towel under the print head. It should fit as this is where the paper goes you print. The towel is a thicker but it is soft. move the print head back and forth over the towel. When the towel is covered with ink, change it and repeat. Keep repeating this until the towel comes clean. It will only take a few minutes. When the towel is clean then you are done. Replace the ink cartridges and paper and you are ready to print.

on Apr 11, 2010 | PC Desktops

1 Answer

Prints in streaks, prints about a 16th to an 8th of an inch ring them skips one, clear across the disk


Sounds like a printer problem...take the ink cartridge out and take a paper towel and moisten it with some water and wipe the cartridge off on the paper towel and then put it back.

Oct 29, 2010 | HP Pavilion AMD Athlon II X4 630 QuadCore...

1 Answer

How do I re-set after a paper jam hp psc 1200?


Verify that the print cartridge door is closed.
The print carriage may be jammed, follow these steps to correct the problem:
1.
Open the print cartridge access door. If the print carriage can move, it should move to center. If the print carriage stays all the way left, unplug the power cord and then plug it back in. This will reset the unit and may allow the print carriage to move from the left.
2.
Disconnect the power cord from the all-in-one.
3.
Remove both print cartridges.
4.
Move the print carriage left and right slightly to verify that the print carriage will move freely. If the print carriage will not move freely, check for obstructions.
5.
Close the print cartridge access door.
6.
Plug the power cord back in.
7.
After the all-in-one initializes, the print cartridge light will flash. Open the access door and install the print cartridges.
8.
Close the print cartridge access door. If the problem returns, remove the print cartridges and wipe the electrical contacts before reinstalling them.
*
Try to make a copy. If the all-in-one pulls in paper but cannot make a copy, there may be a problem with the scanner mechanism. Contact HP for assistance.

If that doesn't work, maybe try this too:


Clearing paper jams
Paper jams can occur for a variety of reasons but are usually paper related. Follow the steps below to clear the paper jam:

1.
Turn off the all-in-one and unplug the power cord. With the power off, the paper feed rollers will turn.
2.
Open the rear access door of the all-in-one by pressing in on the left side of the access door and then pulling it toward you.
NOTE: All paper jams must be removed by pulling the paper out the back of the all-in-one using the rear access door. Pulling the paper out the front of the all-in-one rotates the paper feed rollers in the wrong direction and can lead to additional problems.

Inspect the pressure rollers on the rear access door and verify that they are clean and turn freely. Clean the rollers if needed with a soft towel lightly moistened with water. If the rollers do not turn freely, replace the rear access door.
*
If under warranty, contact HP to obtain a replacement part.
*
Click How to buy on this page to order replacement parts.
3.
From the rear access door opening, gently pull the jammed paper free.
4.
Remove the remaining paper from the paper supply tray. Discard any paper that is damaged or crumpled and then re-stack and reload the paper into the paper supply tray.
Do not continue to push the paper in after some resistance is felt. If the paper is pushed in too far, more than one page will feed into the all-in-one at a time.
5.
Reattach the rear access door by inserting the two pins on the right of the door into the holes for them and then pressing in gently but firmly on the left side.

6.
Reconnect the power cord to the unit and turn the unit on. Source(s): http://www.castleink.com

Sep 01, 2010 | PC Desktops

1 Answer

Printer has full compatable cartridges but says all need replacing. Recently changed magental cartridge and printed one doc and then this happened.


check the reader connection where the printer reads the cartridge . Ink sometime spills on theis surface causing misreads by the printer , clean it with either a diaper wipe or some alcol wipe GENTLY on the connector/and cartridge connector and reinstall the cartridges.

Apr 27, 2009 | PC Desktops

1 Answer

Unable to put printer "on"


First pull the cartridge out and check the comm strip on the cartridge and the printer, Ink could have split on the comm ports ,, try to clean the ink off with alcohol on a cotton swab, then let dry and replace cartridge, then turn on print and try to print it out.

Apr 20, 2009 | PC Desktops

2 Answers

The lights on the printer keep on blinking and I have cleaned the cartridges and have reset them. I also had them checked for ink and they are full. The orange light blinks three times and then stops. I...


Clear any paper or carriage path obstructions
With the product turned on, open the print cartridge access door. The print carriage might try to move into the access area. If so, allow it to move to that position.
Without turning off the product, unplug the power cord from the back of the product. Unplug the power cord from the power source. The power cord must be unplugged to allow the parts to be moved by hand and to reset the paper feed mechanism, without the risk of an electrical shock.
Looking in through either the print cartridge access door or the output paper tray, make sure the print cartridges are locked into the carriage and have not come loose. Also, make sure that there are no obstructions under or around the carriage to block it from moving.
Make sure the print carriage can move freely across the width of the product by gently pushing the carriage to the left and then to the right. Clear any obstructions found. You may have to reach through the output paper tray to access the print carriage.
Close the print cartridge access door and plug the power cord back to the back of the product. Plug the power cord into the power source.
Press the On button to turn on the product.
Plug the product directly into a wall outlet Follow these steps to make sure that the product is correctly connected to a suitable power source.
Remove the power cord from any power strips or surge suppressors, and plug it directly into a grounded wall outlet.
Perform a partial reset A partial reset will return user settings to factory defaults. On some models, language and country/region settings are also reset. Perform a partial reset of the product by following the instructions below.
Unplug the power cord from the unit.
Reconnect the power cord into the unit.
When the lights begin to flash, press and hold the On/Resume buttons.
Try the print job again to see if this step resolved the issue.
If the issue is resolved , you do not need to continue with the rest of the instructions on this page.
If the issue is not resolved , continue to the next step.
Remove and re-install the print cartridges Improper placement or installation of the product's print cartridges can cause the product to indicate a carriage stall error condition. Ensure correct installation of the print cartridges by following the instructions below.
With the printer plugged in and turned on, open the cartridge access door (see the illustration). After a moment, the print carriage should come to the center. The print cartridge carriage is the plastic part that holds the print cartridges. When the carriage is at the center of the access area, unplug the printer.
Remove the cartridges from the carriage and check them for damage. Check for obstructions under and around the carriage. Replace any damaged cartridges.
Reinstall the print cartridges.
Try the print job again to see if this step resolved the issue.
Service the printer If you have completed all the steps listed above and are still experiencing a problem, service the product.

Nov 06, 2008 | PC Desktops

1 Answer

Cannot print anything. Paper goes in halfway and then says 'paper jam'. Checked back - no jammed paper. Keeps on doing this. Have been in to cancel print but keeps saying paper jam. Have tried a print test...


Dear Customer,

you ahve to use batter quility papers for prints,

cause when paper fixed up your printer says its jammed but as realesed its says printing but when ALL THINGS DOIN VERY FAST JAMMING & PRINTING ITS SEEMS LIKE PAPER JAMED ALSO SAW YOU AS PAPER JAMED,

so try to check your inner cartrige,ink & paper rolls,batter quility papers you ahve to use,

THNX

May 18, 2008 | HP PC Desktops

1 Answer

I am trying to print some downloaded pictures from my computer.It says they are pending but nothing else is happening.


CLEAR THE BUFFER BY SWITCHING OFF THE PRINTER AND CANCELL THE PRINT BY OPENING THE PRINTER MENU IN RIGHT SIDE BOTTOM TRAY, SOME TIME THIS MAKE TAKE 4 TO 5 ATTEMPTS...AND MAY REQUIRE A RESTART TO PC, ITS USUAL, DONT WORRY...ONCE THE PENDING PRINTS ARE CLEARED FROM BUFFER IT WILL START PRINTING

Apr 14, 2008 | PC Desktops

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

58 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP PC Desktops Experts

Fred Sops

Level 2 Expert

271 Answers

john smith

Level 2 Expert

366 Answers

Gavindu Dileepa

Level 1 Expert

10 Answers

Are you a HP PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...