Cartridge error i have not printed in 1 week and now my printer gives me a cartridge error and i can not get rid of it. i have a HP officejet 4315 all in one.

Remove each cartridge one at a time and see if the error clears or if a different error comes up. You may have a faulty cartridge.

An '0x ...' Error Message Displays on the Front Panel When Printing HP Photosmart C5380 All-in-One Printer - HP Customer Care (United States - English)

Try using the HP Scan Diagnostic Utility in Windows - HP Customer Care (United States - English).

If you need more help come back.

Post / thumbs / testimonial are welcome!

I replaced both cartriges bought at cartrige world. Screen on printer says: "Cartridge Error". I reinstalled both cartridges and still get "cartridge error". I don't have a owners manual, Help!

Roger

Good Day Sir, hope this will help you.
print cartridge troubleshooting for hp officejet 4315 :

1. Remove the black print cartridge from the slot on the right. Do not touch the ink nozzles or the copper-colored contacts. check for possible damage to the copper-colored contacts or ink nozzles.
2. Reinsert the print cartridge by sliding it forward into the slot. Then push the print cartridge forward until it clicks into the socket.
3. Repeat steps 1 and 2 for the tri-color print cartridge on the left side.
4. If the problem persists, print a self-test report to determine if there is a problem with the print cartridges.
5. If the self test report shows a problem, clean the print cartridges.
6. If the problem persists, clean the copper-colored contacts of the print cartridges.
7. If you are still experiencing problems with printing, determine which print cartridge is experiencing the problem and replace it.

have a nice day.

7.

Please reset your Printer and restart again . The go printer properties and start the printer diagnosis & start test print. If that function going well then your printer ready for further printing with out showing that massage.
Thanks.

HP F2480
Align Cartridge:
If you have just installed a new cartridge it is recommended that you align it. Click on "Align" to align your new cartridge

1. Clean cartridge head,
2. Take cartidge out if can, clean with alcohol lightly not with tissue.
3. Clean roller bar,
4. Clean the tape at end of glide bar that cartridge slides back an forth on. On right side. Important to clean all facets, sensitive laser labels.
5. Check to see if your printer needs all colors to be filled.
6. Reboot the HP.

This works on one of my Cannon multi pass printers which is an all in one. Noted when I filled one of my cartridges with ink and some
leak.
Good Luck

Hello,

This link has information on print cartridge error issues. This link shows information that pertains to clearing paper jams. Hope this helps.

Please remember to rate this information.

Thanks

I had the cartridge error message aswell. I took an alcohol swab and cleaned the points on both cartridges, let the cartridges sit for 1 minute to dry, and replace cartridges, restart printer, problem solved. Apparently I haven't used this printer in a month or so, and left it in my car and the ink dryed and caused an error.