Question about PDAs
To set the time: Press the date/time button (next to the feed button) to make the time appear on the display. Then press and hold the "Time Set" button (the "=" button) until the first digit of the time setting begins to flash. Then just enter the current time with the keypad (3:30 is 0-3-3-0) and use the "AM-PM" key (the "x" button) to toggle am/pm. After you have the time entered, press and release the "Time Set" (=) again to set the new time.
To set the correct date: Press the date/time button (next to the feed button) to make the date appear on the display rather than the time. Then press and hold the "Time Set" button (the "=" button) until the first digit of the date begins to flash. Do the same as before to set the new date. Don't forget to press the Time Set button after you set the date or it will not record the change.
If for some reason you need to reset your calculator, turn it over and stick a pencil into the reset hole next to the battery compartment. That will reset everything.
Posted on Feb 22, 2009
Tips for a great answer:
Feb 11, 2011 | Unitech HT630 Batch Portable Terminal...
Jun 09, 2009 | HTC P3300 Smartphone
Apr 06, 2009 | HTC PDAs
Mar 08, 2009 | HTC P3300 Smartphone
1,865 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: