Question about Jensen RG40 Portable DVD Player with Screen

Open Question

My DVD doesn't work good. especially in my mp3 component.

Posted by on

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


1 Points

Related Questions:

1 Answer

Formats for dvp-ns70h

selectable 720p/1080i output via HDMI digital interface (separate adapter available for TVs with DVI input)
selectable progressive-scan mode for smoother video with HD-compatible TVs (via the component video output)
optical and coaxial digital outputs for Dolby Digital/DTS /PCM
  • 1 set of audio/video outputs (composite, S-video, 480i/480p component video, and HDMI)
  • plays DVD-Video discs, DVD-Rs & DVD-RWs, and DVD+Rs & DVD+RWs
  • plays CDs, CD-Rs & CD-RWs, and MP3 CDs
  • plays digital picture CDs (JPEG)
  • remote control (multibrand for TVs)
  • 108MHz/12-bit video DAC
  • 192kHz/24-bit audio DAC

Oct 14, 2012 | Sony DVP-NS70H DVD Player


Convert ans AVI with MP3 VBR to a CBR with VirtualDub to avoid DVD audio synch...

Why are do we have MP3's with a VBR, whats the point?

VBR encoded MP3's are generally smaller than standard MP3s of the same sound quality and generally sound better, especially in the high frequencies it's also great for spoken word audio as there are often pauses and silence between sentences. However most MP3 players especially the decoders on standalone DVD players with DivX support will exhibit progressive audio delay errors with VBR audio of any type.

If you open an AVI with VBR audio MP3 track in VirtualDub or VirtualDubMod it will give you this WARNING that you may experience progressive audio errors this is certainly the case especially if you want to convert your downloaded DivX Stage 6 into DVD format that use CBR audio in either LPCM or AC3


You will need to download the Lame ACM MP3 codec extract it to a temp folder then right click on LameACM.inf, and choose install this will register and install the ACM for use with VirtualDub and VirtualDubMod note you can do this without the ACM package there is also an AC3 ACM codec that you might as well install at the same time this will allow VirtualDub to decompress Dolby Digital 5.1 audio streams.

Convert using an ACM or audio compression manager for the required MP3 codec use the same one that Gspot tells you that has been used either LAME or

  • Open Virtualdub, open your video then select Direct Stream Copy from the audio menu tick full processing mode, and then choose audio compression. The Lame MP3 should show up in the left-hand list choose CBR stereo on the right.
  • It a good idea to look in the file information so that you make sure to choose the same sample frequency as the original VBR MP3 in this case its 48,000Hz you don't want to re-sample it it will take extra time
This screendump shows the original XVID @ bitrate of 979 kbps with a 154kbps VBR audio MP3 and sample rate of 48KHz this will not work on most standalone DVD


This screendump shows the AVI re-encoded to DivX iwth a fourcc of DX50 @ bitrate of 1,000 kbps with a 128kbps CBR audio MP3 and sample rate of 48KHz this will not work on all DivX certified DVD players the pixel aspect is also 720x576.


The framerate has also been converted (NOT CHANGED) from FILM 23.976 to the UK standard of PAL 25fps you can't adjust it it must be done on the lower section of the window.


Use AVIDemux v2.52 or the latest beta AVIDemux to do the whole process for you it will create a VBR timemap to keep the AV in synch without it forget it !!!


It also allows you to convert the audio using the LAME ACM MP3 and convert to to a CBR it should take about 15mins for a 350MB AVI file don't forget to keep the AVI container packed Video bitstream to give the best re-encoding results to give you the OpenDML AVI v2.0


I have used this with mixed results it is definitely the easiest to use option with a great GUI it just takes a while to know which buttons to press to give the required results, you can also set a time lag/lead for fixed audio problems and increase the audio volume in (dB) decibels for low volume audio. You have been warned the easy isn't the best way


This shows that Avidemux has converted the AVI file to a FOURCC of DX50 required for Standalone DVD with DivX compatibility and a CBR 0x0055 MPEG-1,layer 3 the video bitstream was unpacked this will give you AVI v1.0 which you may have still problems with so leave is packed to ge the AVI v2.0 container

If this does not work and you still get a progressive audio error when you convert it to a DVD you can use a combination of AVIMux GUI ,VirtualDubMod and WinMP3 packer to split the Video and Audio change the audio stream to CBR and rejoin the two.

Open up the file in AVIMux GUI extract the binary of the audio track you need to right click it do get this then use WinMP3Packer to convert the extracted MP3 file into an MP3 file with a CBR of the same sample rate of 48KHz


Open up the full AVI in VirtualDubMod it will warn you about the improper VBR in the source click NO to rewriting the packet header, next change the video to Direct Stream Copy" and disable the audio track under the streams > stream list option and save as AVI the file with the audio VBR disabled


the audio stream must show hatched as below to ensure that the track is removed


Then I go back into VirtualDubMod, open up the AVI saved without audio, change the video to "Direct Stream Copy" go into Stream List add the re-encoded CBR MP3, and then save as AVI.

Check to see if the MP3 has been changed to CBR in GSpot also check it for sync errors fast forward to the middle and end and you will know straight away in VirtualDub or use another media player VLC is a good one that uses the free Libavcodecs.

You should then be able to convert the AVI to DVD format using ConvertXtoDVD If you have burned the result to DVD, see if the result of the converted file (before it was burned to DVD) has the same synchronization problems in order to make sure that the audio problems are not due to bad media. You may have to redo the conversion with the option "Burn result to DVD" and/or "Delete folder after successful burn" unchecked Use the latest version of VLC to watch the result

However If the unburned result also has the problem, you can check "Don't check/fix audio discontinuities" (in settings under "Audio" tab) redo the conversion and see if the result is any better.

on Feb 10, 2010 | Philips DivX DVD Player

1 Answer

DVD recorder doesn't work

what is the problem, doesn't turn on or doesn't record .

Sep 27, 2012 | DVD & Blu-Ray Players

2 Answers

Display Reads - No Read or UNSUPPORTED when using DVD

If you cant play a real dvd in it, the laser is prob out of allignment or broken, if its just dvd that you burned, try changing disc type, there is +R and -R , also if that does not work try a different program to burn discs ? good program is convert X to dvd, not free, unless your good at torrents :)

Jul 11, 2012 | Panasonic DMR-EZ47V DVD Recorder/VCR

1 Answer

I have a **** Smith GE4203 DVD player, but none of the "MPEG4" files I plug in with a USB stick works. The machine recognises an AVI file, but doesn't play it. What settings should I use?...

Rip your DVD's using XviD format and not DivX and they should play just fine.

A good free software to try is "Winx Free DVD to XviD" but you'll have to have unprotected DVD's or rip them to the hard drive first using DVDFab to remove the protection or just have Slysoft AnyDVD running.
I set the video's audio to mp3 format (128Kbps 48000sample rate), and the video to 25fps(because in Australia we have PAL format), output profile to keep original size and aspect ratio, and video quality to about 1500kbps.
You won't get much benefit from a higher bit rate then that on a GE4203 screen and you could probably even go lower if you have speed or sync issues with the data rate. Even 1200 looks good.

May 28, 2011 | DVD & Blu-Ray Players

1 Answer

I just replaced the 2 capacitors that was causing the "Please Wait" problem. Now, it only powers on from the unit and the remote won't work, and the other buttons on the unit won't work either.

I assume you put the caps in the right way? Check to see if you accidentally bridged a solder joint. Or I've done this, pull other components out to check them and got them turned around backwards, especially caps.

Oct 27, 2009 | Panasonic DMR-E85H DVD Recorder

1 Answer

Rca portable dvd player model drc6318e doesnt not load dvd. says no disc. how do i fix that?

first you must check if your portable loads cd or mp3. If it loads cd or mp3 the defect is lens and this should be replace by an expert. If both cd,mp3 and dvd didn't load you check first the ribbon wire for signs of disconnection and foldings and then replace it. If still your portable didn't work the most probable defect is MPEG board.To distinguish if MPEG or lens defect in lens shows malfunction such as not reading dvd but reading mp3 or cd, unwanted stop of play even with a good dvd.

Jul 11, 2009 | RCA DRC6318E Player

2 Answers

No light fuse is good unit (1) want power up and unit (2) red light but want do nothing both are connected to AC power source

The CH DVD300 is notorious for power supply problem. If this the case, you can send the power supply to be repaired for around $15.00 to:

Wired Communications

31211 N. 77th Way

Scottsdale, AZ, 85262

Tel. 480-209-1700

Contact them before sending anything.



Oct 04, 2007 | Cyberhome CH-DVD 300 DVD Player

1 Answer

Sony DVP-NS315 cant play only Video Disc

If you are using just a "yellow" ended cable for the video, maybe your custom settings are set to use "component"? I have been using this same dvd player for a while with the component video out and it works fine. I hope this helps.

Sep 30, 2007 | Sony DVP-NS315 DVD Player

2 Answers

Red light is barley on

The CyberHome CH 300 is a good, inexpensive DVD player with a power supply board prone to fail, because of a few weak components, especially if left turned on and not used.
Usually, if the power supply fails, the red light will not illuminate when plugged in, and of course not turn green when turned on.

If you have this specific problem, I can repair the power supply for $20.00. Contact me at to arrange shipping and return of the repaired board.

Sep 27, 2007 | Cyberhome CH-DVD 300 DVD Player

Not finding what you are looking for?
Jensen RG40 Portable DVD Player with Screen Logo

Related Topics:

13 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jensen DVD & Blu-Ray Players Experts


Level 2 Expert

153 Answers

Charlotte Byrams
Charlotte Byrams

Level 2 Expert

45 Answers


Level 2 Expert

55 Answers

Are you a Jensen DVD and Blu-Ray Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides